• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1329-1340
• /
• 2021

The intertidal zone, which is a transitional zone between the ocean and the land, requires continuous monitoring as various changes occur rapidly due to artificial activity and natural disturbance. Monitoring of coastal topography changes using remote sensing method is evaluated to be effective in overcoming the limitations of intertidal zone accessibility and observing long-term topographic changes in intertidal zone. Most of the existing coastal topographic monitoring studies using remote sensing were conducted through high spatial resolution images such as Landsat and Sentinel. This study extracted the waterline using the NDWI from the GOCI-II (Geostationary Ocean Color Satellite-II) data, identified the changes in the intertidal area in Gyeonggi Bay according to various tidal heights, and examined the utility of DEM generation and topography altitude change observation over a short period of time. GOCI-II (249 scenes), Sentinel-2A/B (39 scenes), Landsat 8 OLI (7 scenes) images were obtained around Gyeonggi Bay from October 8, 2020 to August 16, 2021. If generating intertidal area DEM, Sentinel and Landsat images required at least 3 months to 1 year of data collection, but the GOCI-II satellite was able to generate intertidal area DEM in Gyeonggi Bay using only one day of data according to tidal heights, and the topography altitude was also observed through exposure frequency. When observing coastal topography changes using the GOCI-II satellite, it would be a good idea to detect topography changes early through a short cycle and to accurately interpolate and utilize insufficient spatial resolutions using multi-remote sensing data of high resolution. Based on the above results, it is expected that it will be possible to quickly provide information necessary for the latest topographic map and coastal management of the Korean Peninsula by expanding the research area and developing technologies that can be automatically analyzed and detected.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.112-118
• /
• 2011

The recycled asphalt concrete has gotten increasing attention due to the environmental issues. The volume of reclaimed asphalt has increased significantly for last few years because of city remodeling, pavement maintenance, utility excavation, and road widening. Considering the value of reclaimed asphalt, it is rather used for the recycled asphalt concrete than it is used for fill and cover up material instead of soil. This research will be a supplements incomplete issues from existing research results and suggests the quality control guideline for recycled asphalt concrete and upcoming laws. As the first step of research, the trial construction of RAP(Recycled Asphalt Pavement) performed in expressway construction sites. These trial construction sites have been checked every years. And another construction sites studied and selected for more deeper performance check of RAP. For this checks, we used automatic pavement survey equipment and computerized analysis tools. Also, DSR(Dynamic Shear Rheometer) was used for the fatigue life calculation of binder blends(RAP and virgin binder). As a consequence of this research, the application of recycled asphalt provides good enough quality for highway construction. The preceeding literatures reviewed shows that the asphalt rejuvenator are used in many countries but that type of chemical agent are not used in Korea. By using the data of trial construction and mix design in Chongwon-Sangju construction lane, the surface and base courses consisted with the 10% and 30% rap mix asphalt section maintains good performance for up to 7 years. Through the performance check and laboratory tests(DSR), the quality control and mixture's low temperature prevention are the important factor and chemical agent necessary for increasing the fatigue life of RAP binder.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.167-176
• /
• 2011

This study's purpose is to analyse factors of determination about detouring for makinga standard model in regard of unfavorableness and uncertainty when unspecified individual recipients make a decision at the time of course detour. In order to achieve this, we surveyed SP investigation whether making a detour or not for drivers as a target who take a high way and National highway. Based on this result, we analysed detour determination factors of drivers, establishing a combination model of Decision Tree and Neural Network model. The result demonstrates the effected factors on drivers' detour determination are in ordering of the recognition of alternative routevs, reliable and frequency of using traffic information, frequency of transition routes and age. Moreover, from the outcome in comparison with an existing model and prediction through undistributed data, the rate of combination model 8.7% illustrates the most predictable way in contrast with logit model 12.8%, and Individual Model of Decision Tree 13.8% which are existed. This reveals that the analysis of drivers' detour determination factors is valid to apply. Hence, overall study considers as a practical foundation to make effective detour strategies for increasing the utility of route networking and dispersion in the volume of traffic from now on.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.197-205
• /
• 2015

Offshore structures for the gas production are exposed to the risk of gas leaks, and gas explosions can result in fatal damages to the primary structures as well as secondary structures. To minimize the damage from the critical accidents, the study of the dynamic response of structural members subjected to blast loads must be conducted. Furthermore, structural dynamic analysis has to be performed considering relationships between the natural frequency of structural members and time duration of the explosion loading because the explosion pressure tends to increase and dissipate within an extremely short time. In this paper, the numerical model based on time history data were proposed considering the negative phase pressure in which considerable negative phase pressures were observed in CFD analyses of gas explosions. The undamped single degree of freedom(SDOF) model was used to characterize the dynamic response under the blast loading. A blast wall of FPSO topside was considered as an essential structure in which the wall prevents explosion pressures from the process area to utility and working areas. From linear/nonlinear transient analyses using LS-DYNA, it was observed that dynamic responses of structures were influenced by significantly the negative time duration.

• The Korean Journal of Cytopathology
• /
• v.7 no.2
• /
• pp.163-168
• /
• 1996

Abnormalities of p53 gene are common in lung cancers and are associated with immunologically detectable p53 protein. p53 immunoreactivity is uncommon in normal cells but is frequently seen in neoplasia. Therefore, assessment of p53 expression may assist in the cytological diagnosis of malignancy. The usefulness of p53 immunostaining as a marker of malignancy in the cytological analysis of bronchial brush specimens from the patients with lung cancers was investigated in this study. A total of 71 bronchial brush samples submitted for cytologic diagnosis were immunostained with D07, a monoclonal antibody to recombinant p53 protein. Resultant p53 data were correlated with cytologic diagnosis and clinical information. Of the 17 smears with a benign cytodiagnosis, all were p53 negative. Of the 40 cases with a malignant cytodiagnosis (histologically confirmed), 35 were p53 positive and 5 were negative. Of the 14 cases that were cytologically suspicious but nondiagnostic for malignancy, 11 were p53 positive, 9 of which were subsequently proved to be malignant by histologic examination, and the remaining 2 cases were tuberculosis clinically. Forty four of 51 histologically confirmed lung carcinomas were p53 positive, including 25 of 28 squamous cell carcinomas, 13 of 17 small cell carcinomas, 3 of 3 adenocarcinomas, and 3 of 3 large cell undifferentiated carcinomas. These results suggest that p53 immunostaining could be of value as a marker of malignancy in the cytologic examination of bronchial brush specimens. Furthermore, we have shown the possible clinical utility of p53 immunostaining in cytopathological diagnosis, that is, as a valuable adjunct to morphological assessment in the analysis of cytopathologically suspicious cases.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.355-360
• /
• 1999

Objectives: This 3-year longitudinal study was conducted to evaluate the influence of self-rating health perception on health care utilization and all cause-death risk. Methods: The hypothesis was tested using a community-based samples, among which subjects 3,414 were interviewed in 1995, Self-rating health perception was assessed by single-item question. Three components of health care utilization amount(number of visits, number of medications, yearly health care expenses) per year were measured using medical insurance data during 3-year follow-up period among subjects in district health care insurance. There were 123 deaths from all causes among 3,085 subjects interviewed. Results: The results showed that those who had poor health perception revealed more increases in the amount of health care utilization than good health perception group (p<0.05). After adjusting for age and sex, the poor health perception group had higher death risk over 3 years than good health perception group(hazard ratio=1.88). but, after adjusting health care utility, supplementary, was not significant. Conclusion: These results suggest that self-rating health perception was associated with difference in health care utilization and all cause-death risk.

• Survey Research
• /
• v.8 no.1
• /
• pp.1-30
• /
• 2007

Several corporations are adopting the 6 Sigma program. Not all corporations are yielding intended results. The inconsistent results may due to the absence of an adequate strategy formulation of 6 Sigma implementation. The 6 Sigma is a qualify control program but its implications are not confined only to qualify improvement. The 6 Sigma program is a change program to bring about changes in organizations. The thesis focuses on developing an installation strategy or model of 6 Sigma program. The utility of the model developed in this research is supported by the empirical evidence. The validity of the model is tested and verified based on the questionnaire survey conducted at 281 business firms. Few research has adopted the empirical survey. The previous researches are mostly centered around identifying success factors. Unlike the present methodology adopted in this research, the past research methodologies are mainly case studies. The distinctive feature of this research does not confine only to the methodology. This research attempted to identify an installation model that would help enterprises get maximum output from the 6 Sigma program. The suggested model is named as Sequential Model(SM). The SM consists of three stages: the preparation stage, the acceptance stage, and the maturity stage. The model is based on the assumption that organizations should follow three stages sequentially to yield the desired output effectively, The preparation stage is further defined including the organizational change factor, the driving system factor, and the promotion factor. The result variable, the organizational performance, is also further defined including the market competitiveness, the employees competitiveness, and the financial performance. The Structural Equation Model was used to test the validity of the Sequential Model(SM). Several alternatives models were developed and compared. The test results consistently show that the suggested model is a valid one and proves its superiority over alternative models. Through this empirical research, we have shown that the strategies of enterprises in line with the proposed model gained better results over others. The research results would be useful information for enterprises that consider formulation of installation strategy of 6 Sigma program.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.1
• /
• pp.45-48
• /
• 2003

We have previously cloned and characterized the complete fibroin L-chain gene from one of the silkworm races Baekok-Jam (Bombyx mori) and found two variable regions (I, intron 2 ~ exon 3; II, intron 6) with the primer sets designed to cover these variable regions. We tested the utility of these regions as genetic markers among silkworm races. For the purpose of study, Japanese race (Jam 123), Chinese race (Jam 124) and their F$_1$hybrid Baekok-Jam were used. The PCR product size of region I was 787 bp in Jam 123, 770 bp in Jam 124 and 768 bp in Baekok-Jam. The size of region II was 470 bp in Jam 123, 428 bp in Jam 124 and 429 Up in Baekok-Jam. In the extended experiment, Jam 125 (Japanese race), Jam 126 (Chinese race) and their F$_1$hybrid Daeseong-Jam were also analyzed. The sizes of region I and II in Jam 125, Jam 126 and Daeseong-Jam were similar to those of Jam 123, Jam 124 and Baekok-Jam. DNA sequence divergence between the two geographic races of Jam 123 or Jam 125 and Jam 124 or Jam 126 was substantial. The result suggests that the fibroin L-chain gene of F$_1$hybrids were inherited from Chinese races. These results are concordant with cocoon shapes of tested animals, and suggested that Baekok-Jam or Daeseong-jam is more closely related to Jam 124 or Jam 126 than to Jam 123 or Jam 125. Taken these data together, the primer sets designed from two variable regions of fibroin L-chain gene would be highly useful, as the genetic markers for silkworm races, at least in Japanese and Chinese races, although an extended study including more geographic races is required.

• Parasites, Hosts and Diseases
• /
• v.48 no.1
• /
• pp.61-65
• /
• 2010

The objectives of this study were to conduct a prevalence survey of trichomoniasis in pregnant women and to evaluate the utility of different methods for its diagnosis. A total of 597 vaginal exudates from pregnant women who were examined at the Hospital de Clinicas in Buenos Aires, Argentina from 1 August 2005 to 31 January 2007, were prospectively and consecutively evaluated. The investigation of Trichomonas vaginalis was made by different microscopic examinations, and culture on liquid medium. The sensitivity and specificity of the microscopic examinations were assessed considering culture on liquid medium as the "gold standard". The prevalence of T. vaginalis obtained by culture on liquid medium was 4.0% (24/597). The prevalence of T. vaginalis obtained by direct wet smear, prolonged May-Grunwald Giemsa staining, and sodium acetate-formalin (SAF)/methylene blue staining-fixing technique was 1.8%, 2.3% and 2.5%, respectively. The sensitivity of the direct wet smear was 45.8%, that of the prolonged May-Grunwald Giemsa staining was 58.3%, and that of the SAF/methylene blue method was 62.5%. Considering the 3 microscopic examinations altogether, the sensitivity rose to 66.7% and the specificity was 100% for all of them. This is the first time that the prevalence data of T. vaginalis by culture in pregnant women are published in Argentina. Due to the low sensitivity obtained by microscopy in asymptomatic pregnant women, the use of the liquid medium is recommended during pregnancy, in order to provide an early diagnosis and treatment.

• Archives of Plastic Surgery
• /
• v.47 no.5
• /
• pp.428-434
• /
• 2020

Background Three-dimensional (3D) model printing improves visualization of anatomical structures in space compared to two-dimensional (2D) data and creates an exact model of the surgical site that can be used for reference during surgery. There is limited evidence on the effects of using 3D models in microsurgical reconstruction on improving clinical outcomes. Methods A retrospective review of patients undergoing reconstructive breast microsurgery procedures from 2017 to 2019 who received computed tomography angiography (CTA) scans only or with 3D models for preoperative surgical planning were performed. Preoperative decision-making to undergo a deep inferior epigastric perforator (DIEP) versus muscle-sparing transverse rectus abdominis myocutaneous (MS-TRAM) flap, as well as whether the decision changed during flap harvest and postoperative complications were tracked based on the preoperative imaging used. In addition, we describe three example cases showing direct application of 3D mold as an accurate model to guide intraoperative dissection in complex microsurgical reconstruction. Results Fifty-eight abdominal-based breast free-flaps performed using conventional CTA were compared with a matched cohort of 58 breast free-flaps performed with 3D model print. There was no flap loss in either group. There was a significant reduction in flap harvest time with use of 3D model (CTA vs. 3D, 117.7±14.2 minutes vs. 109.8±11.6 minutes; P=0.001). In addition, there was no change in preoperative decision on type of flap harvested in all cases in 3D print group (0%), compared with 24.1% change in conventional CTA group. Conclusions Use of 3D print model improves accuracy of preoperative planning and reduces flap harvest time with similar postoperative complications in complex microsurgical reconstruction.