• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.274-280
• /
• 2000

The fact that error probability is higher in wireless communication environment than the one in a fixed network makes it inappropriate to apply the same DLC (Data Link Control) protocol used in a wireline network to a wireless network. And since the existing DLC protocol for wireless network was optimized for low-rate data service, it is not suitable for a wireless network environment which should support high-speed and multimedia traffic. Therefore it is desperate to have a new DLC protocol for todays wireless mobile communication environment. In this paper, we propose an error control scheme in WATM (Wireless Asynchronous Transfer Mode) environment. which supportsmultiple traffic attributes, high-speed, multimedia data service. In this paper we modified the existing ASR ARQ (Adaptive Selective Repeat Automatic Repeat Request) protocol where cells exceeding maximum allowable delay range are discarded. And adding FEC (Forward Error Correction) for delay-sensitive traffic resulted in smaller increase of transmission delay.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.43-48
• /
• 2004

RTP that is proposed supplement of real-time services on internet environment, as Real-time Transport Protocol, is the protocol that for the purpose of sending data of stream type. RTP and RTCP(Real-time Transport Control Protocol) basically work at the same time, RTCP serves with state information of network at present. RTP has important properties of a transport protocol that runs on end-to-end systems and provides demultiplexing. It also offer reliability and protocol-defined flow／congestion control that transport protocol like TCP can not provides. In this paper, we look around concept and construction of Differentiated sen1ice tint run on RTP and by setting parameters of packet transfer method be used CBQ(Class-Based Queuing) for packet transfer on Differentiated service, each service queue controls properly through packet scheduling method, such as WRR(Weighted Round Robin) and PRR(Packet-by-packet Round Robin) all service classes do not experience the starvation and confirm the performance through computer simulation to achieve fairly scheduling.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2971-2973
• /
• 2000

In this paper, we proposed the implementation of multiple access serial communications with improved transmission control. For serial communications. RS232 protocol is used and the transmitting data and is merged to form data channel. Multiple host access is configures by using the common data channel and ground channel. 8bit data transfer with variable frame size is transferred by using the 16bit host ID. Packet is composed of HEADER, receiver ID. variable length data frame, TAIL and CRC informations. Multiple hosts are allowed to transfer packet with the other hosts through the common communication channel. Byte-stuffing is used to differentiate the transfer rate of PC is performed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.38-43
• /
• 2017

Sensor Networks (WSNs) can be defined as a self-configured and infrastructure-less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperatively pass their data through the network to a main location or base-station where the data can be observed and analyzed. Typically a wireless sensor network contains hundreds of thousands of sensor nodes. The sensor nodes can communicate among themselves using radio signals. A wireless sensor node is equipped with sensing and computing devices, radio transceivers and power components. The individual nodes in a wireless sensor network (WSN) are inherently resource constrained: they have limited processing speed, storage capacity, communication bandwidth and limited-battery power. At present time, most of the research on WSNs has concentrated on the design of energy- and computationally efficient algorithms and protocols In order to extend the network life-time, in this paper we are looking into a routing protocol, especially LEACH and LEACH-related protocol. LEACH protocol is a representative routing protocol and improves overall network energy efficiency by allowing all nodes to be selected to the cluster head evenly once in a periodic manner. In LEACH, in case of movement of sensor nodes, there is a problem that the data transmission success rate decreases. In order to overcome LEACH's nodes movements, LEACH-Mobile protocol had proposed. But energy consumption increased because it consumes more energy to recognize which nodes moves and re-transfer data. In this paper we propose the new routing protocol considering nodes' mobility. In order to simulate the proposed protocol, we make a scenario, nodes' movements randomly and compared with the LEACH-Mobile protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.728-738
• /
• 2016

We are currently able to share not only the information from humans but also the data from connected things on the Internet. We are getting close to IoT era because of progress of Information Communication Technology. Therefore, the ways of data transfer are offered between things to things. One of typical way is the HTTP protocol. However, The field of Internet of Things platforms requires more fast and more stable communication protocol to handle massive data. The system supporting HTTP protocol, there is a problem of transmission efficiency in a relatively large header compared to data. also HTTP protocol system overload situations and the problem of data compatibility happens due to each standard of many organizations. Thus, To solve these problems, I suggest the data collection solution based on MQTT protocol for the operation of the stable IoT platforms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.19-27
• /
• 2011

Due to the growth of optical fiber network technologies, most networks recently support several tens of Gb/s bandwidth. UDT(UDP-based Data Transfer protocol) is an optimized protocol for bulk data transmission on the network, which has the high bandwidth and long delay time. It periodically controls the sending rate on the fixed sync-interval, 0.01 sec. Here, if the network traffic status varies quickly, available network bandwidth is not able to be properly utilized in-between the sync-intervals. In this paper, we propose an adaptive rate control method with considering the network traffic status in-between the sync-interval periods. The network traffic status is determined based on the RTT variances. With dividing the network status into four classes, the proposed method performs a new rate control by adjusting the inter-packet sending period for a corresponding class. As a simulation result, the proposed method improves the message delivery throughput as well as stability than that of the existing UDT Protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.39-45
• /
• 2011

In this paper, we propose an efficient multichannel MAC protocol with idle nodes assistance to avoid the multi-channel hidden terminal problem in cognitive radio ad hoc network and further to improve the performance of the network. The proposed MAC protocol can be applied to the cognitive radio adhoc network where every node is equipped with the single transceiver and one common control channel exists for control message negotiation. In the proposed protocol, the idle nodes available in the neighbour of communication nodes are utilized because the idle nodes have the information about the channels being utilized in their transmission range. Whenever the nodes are negotiating for the channel, idle nodes can help the transmitting and receiving nodes to select the free data channel for data transfer. With the proposed scheme, we can minimize the hidden terminal problem and decrease the collision between the secondary users when selecting the channel for data transfer. As a result, the performance of the network is increased.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.375-381
• /
• 2022

Safety accidents are of concern during construction projects, even given the recent innovations in digital technologies. These projects remain focused on overcoming specific and limited applications on construction sites. For this reason, the development of an inclusive safety management system has become crucial. This study aims to build a Big Data platform to inform decisions on how to proactively eliminate worker hazards on construction sites. The platform consists of about 100,000 real records and a real-time monitored database featuring various safety indices, such as workers' altitudes, heart rates, and fatigability during construction, which are determined through various wearable devices. The data types are customized and integrated by a research team in accordance with the characteristics of a specific project using hypertext transfer protocol (HTTP). The results can be helpful as efficient tools to ensure successful safety management in complex construction situations. This study is expected to provide three significant contributions to the field, including real-time fatigability analysis and tracking of workers on-site; providing early GPS-based warnings to workers who might be accessing dangerous spaces or places; and monitoring the workers' health indices, based on details from 100,000 cases.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.171-175
• /
• 1997

We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).