• 제목/요약/키워드: Data Switching

검색결과 889건 처리시간 0.033초

직업훈련 부정 예방교육 만족도 조사와 개선방안 연구 (A Study on the Satisfaction and Improvement Plan of Fraud Prevention Education about Technical and Vocational Education and Training)

  • 정선정;이은혜;이문수
    • 직업교육연구
    • /
    • 제37권5호
    • /
    • pp.25-53
    • /
    • 2018
  • 이 연구는 직업훈련 부정 예방교육(이하 '예방교육')에 참여한 훈련기관 관계자의 만족도 조사를 통하여 개선방안을 도출하는 데 목적이 있다. 이를 위해 2017년 집합교육과 이러닝으로 실시하는 예방교육에 참여한 훈련기관 관계자를 대상으로(5,939명) 만족도 조사를 실시하였다(4,263명). 최종적으로 회수된 유효 응답자료(4,237명)를 기술통계 및 회귀분석 등을 이용하여 분석하였다. 이 연구의 주요 결과는 첫째, 훈련기관 관계자가 인식한 교육서비스 품질(4.42)과 만족도(4.44), 이해도(4.44) 및 도움도(4.45)는 모두 매우 높고, 교육서비스 품질을 구성하는 하위요인도 4점 이상으로 모두 높게 나타났다. 둘째, 방법별 교육서비스 품질과 만족도, 이해도 및 도움도는 집합교육에 비해 이러닝으로 참여한 훈련기관 관계자의 인식도가 모든 변인에서 높게 나타났다. 셋째, 예방교육 서비스 품질 하위요인 모두는 집합교육과 이러닝에서 각각 만족도, 이해도, 도움도에 영향을 미치는데, 교육서비스 품질 하위요인 중에서 만족도, 이해도, 도움도에 공통적으로 가장 큰 영향을 미치는 요인은 집합교육에서는 교육내용이, 이러닝에서는 자료구성으로 나타났다. 넷째, 예방교육에서 추가적으로 희망하는 교육내용은 부정훈련 사례(70.7%), 처분규정(47.9%), NCS과정 운영 유의사항(32.8%), 훈련운영 우수사례(32.4%) 등의 순으로 나타났다. 추가 요구사항에서도 심화과정 개설, 훈련생 대상 부정 예방교육 콘텐츠 제공, 이러닝에서 집중할 수 있는 화면전환 및 시스템 안정성 등이 추가적으로 제기되었다. 따라서 이 연구의 제언으로는 첫째, 집합교육에 비해 이러닝의 만족도 등이 더 높게 나타난 것을 반영하여, 예방교육 이러닝을 보다 활성화할 필요가 있다. 둘째, 예방교육 만족도와 이해도 및 도움도에 공통적으로 가장 큰 영향을 주고, 희망사항 및 기타의견에서도 교육내용에 대한 보완이 제시되고 있어, 예방교육 내용을 다양화 하여 보다 풍부하게 제공할 필요가 있다. 셋째, 집합교육에서 교육내용 다음으로 만족도 등에 상대적으로 큰 영향을 미치는 요인은 전달방법과 교육장소로 나타난 바, 전달력이 뛰어난 강사 배정과 편의성 등을 고려한 교육장소 마련이 필요가 있다. 넷째, 이러닝에서 자료구성 다음으로 이해도와 도움도에 공통적으로 큰 영향을 미치는 요인은 운영자지원으로 나타난 바, 보다 활발한 운영자 지원활동이 요구된다. 다섯째, 직업훈련에 참여하는 훈련생을 대상으로 한 부정훈련 예방활동도 요구되며, 여섯째, 예방교육의 내용을 보다 체계적으로 구성하기 위하여 교육 요구도 분석을 수행할 필요가 있다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

토지이용 변화지역의 토양재조사 결과 분석 (Study on Soil Survey Results of Rapid Change in Landuse)

  • 현병근;손연규;박찬원;송관철;전현정;홍석영;문용희;노대철;정소영
    • 한국토양비료학회지
    • /
    • 제45권4호
    • /
    • pp.475-483
    • /
    • 2012
  • 최근 농경지의 급격한 감소와 더불어 도시화, 경지정리, 도로공사 및 혁신도시 건설 등으로 토지이용의 변화가 심하게 발생되고 있다. 특히, 토지이용 변화심화지역인 경기도 고양시, 충청남도 천안시, 강원도 원주시를 대상으로 토지 이용변화실태, 토양특성변화양상, 토양도수정내용 및 기업도시 등으로 편입되는 지역의 토양환경분석을 하였다. 이에 대한 결과를 요약하면 다음과 같다. 1. 우리나라의 경지면적 (2011년)은 2009년대비 17.3 ha가 감소되었다. 논의 경우 24.2 ha가 감소되었으나, 밭의 경우에는 7.0 ha가 증가하였다. 2. 논의 면적 감소사유로는 논밭전환 (20.7 ha) > 공공시설 (3.2) ${\geq}$ 건물건축 (3.2) > 유휴지 (1.3) > 기타 (0.9) 순이며, 밭 면적의 증가원인은 논밭전환 (20.7 ha) > 개간 (4.5) > 복구 (0.3) 순이었다. 논밭전환의 이유는 논농사에서 농가소득이 높은 밭작물 내지 시설작물로 전환하는 것으로 생각된다. 3. 토지이용변화가 심한 해당시군의 농경지감소 (논, 밭, 과수)는 밭토양조사 (1995~1999) 당시와 비교 (2011년)할 때 고양시는 1,466 ha, 천안시 9,708, 원주시 6,980 ha가 감소되었으며, 1999년 대비 45%~25%의 농경지가 급격히 감소되었다. 4. 환경부 토지이용피복도의 통계자료 활용성을 검토하기 위해 농식품부 통계자료와 비교시 지목별로 큰 차이가 있었다. 따라서, 추후 면밀한 검토를 통하여 활용 방안을 마련해야 할 것이다. 5. 원주시의 토양정보 변경내용을 보면 곡간지의 일부 논토양이 밭 또는 과수원으로 토지이용이 변경되었으며, 배수등급의 경우 도로건설 등으로 인해 저습화되는 등 해당 토양의 일부 특성정보가 변경되었다. 특히, 논토양의 경우 시설재배지, 밭, 과수원, 휴경, 성토화 등으로 토지 이용의 변화가 심하였다. 6. 원주시 혁신도시에 편입되는 논토양은 급지가 떨어지는 3~4급지가 대부분으로 3급지 70.8%, 4급지 29.2%이었다. 밭토양 역시 4급지가 88.7%인 토양으로 우량 급지가 혁신도시 건설에 속하지는 않았다. 앞으로 우량농경지 보전을 위해 제도적 장치의 마련이 필요하다고 생각한다.

ML-AHB 버스 매트릭스를 위한 슬레이브 중심 중재 방식의 성능 분석 (Performance Analysis of Slave-Side Arbitration Schemes for the Multi-Layer AHB BusMatrix)

  • 황수연;박형준;장경선
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제34권5_6호
    • /
    • pp.257-266
    • /
    • 2007
  • 온 칩 버스에서 중재 방식은 전체 시스템의 성능을 결정하는 중요한 요소 중 하나이다. 전통적인 공유 버스는 다수의 마스터와 단일 중재기 사이의 버스 사용 요청 및 권한 신호에 기반한 마스터 중심의 중재 방식을 사용한다. 마스터 중심의 중재 방식을 사용할 경우 한 순간에 오직 하나의 마스터와 슬레이브만이 데이타 전송을 수행할 수 있다. 따라서 전체 버스 시스템의 효율성 및 자원의 이용률이 감소되는 단점이 있다. 반면, 슬레이브 중심의 중재 방식은 중재기가 각 슬레이브 포트 별로 분산되며, 마스터는 중재 동작 없이 바로 트랜잭션을 시작하고, 다음 전송을 진행시키기 위해 슬레이브의 응답을 기다리는 방식을 취한다. 따라서 중재 동작의 단위가 트랜잭션 또는 단일 전송이 될 수 있다. 또한 다수의 마스터와 다수의 서로 다른 슬레이브 사이에 병렬적인 데이타 전송이 가능하기 때문에 버스 시스템의 효율성 및 자원의 이용률이 증가된다. 본 논문은 슬레이브 중심의 중재 방식을 사용하는 온 칩 버스인 ML-AHB 버스 매트릭스에 다양한 중재 방식을 적용시켜 전체 버스 시스템의 성능을 비교 분석해 보고, 어플리케이션의 특징에 따라 어떤 중재 방식을 사용하는 것이 더 유리한지에 대해 언급한다. 본 논문에서 구현한 중재 방식은 고정된 우선순위 방식, 라운드 로빈 방식 및 동적인 우선순위 방식으로 나뉘며, 마스터와 슬레이브의 특성 별로 각각 실험을 수행하였다. 성능 시뮬레이션 결과, 버스 시스템에서 임계 경로에 있는 마스터의 개수가 적을 경우 동적인 우선순위 방식이 가장 높은 성능을 보였으며, 임계 경로에 있는 마스터의 개수가 많거나, 또는 모든 마스터들의 작업 길이가 동일할 경우 라운드 로빈 방식이 가장 높은 성능을 보였다. 또한 SDRAM과 같이 접근을 위한 지연이 긴 메모리 또는 장치들을 슬레이브로 사용하는 어플리케이션에서는 단일 전송 단위의 중재 방식보다 트랜잭션 단위의 중재 방식이 더 높은 성능을 보였다. 실제 SDRAM의 지연 시간이 1, 2 및 3 클럭 사이클인 경우 각각 26%, 42% 및 51%의 성능 향상을 보였다.

국내 프랜차이즈 기업의 제3자 물류 활성화에 관한 연구 : 본아이에프 사례 중심으로 (A study on the activation plan of domestic franchise companies third party logistics)

  • 조준호;이상윤
    • 산경연구논집
    • /
    • 제2권2호
    • /
    • pp.15-24
    • /
    • 2011
  • 현 시대에서 기업 발전을 이루기 위해서는 자사의 핵심 분야에 역량을 집중시키고 기업 비용절감을 도모하고 고객에 대한 서비스의 질을 향상 시키는 등의 노력을 하여야 한다. 그중에서 기업들은 자사의 역량을 핵심 분야에 집중시키고 나머지 부분들은 아웃소싱을 통해 기업비용 절감을 실현시키는 방법에 관심을 기울이고 있고 특히 물류 부문의 아웃소싱에 대한 관심이 높아지고 있다. 이러한 이유는 우리나라 기업물류비가 선진국에 비해 월등히 높다는 것 때문이다. 이와 같은 높은 물류비는 대외적으로 수출상품의 가격경쟁력 약화와 무역수지 악화를 초래하고, 대내적으로는 물가상승 요인으로 작용하여 우리경제에 큰 부담이 되고 있어 국가 경쟁력 강화를 위해 물류비 절감이 절실히 요구 되고 있다. 이러한 상황의 해결책으로 대두되고 있는 것이 바로 제3자 물류기업으로의 아웃소싱이다. 이에 따라 현재는 전문물류업체 등장과 함께 많은 기업들이 자사물류에서 제3자 물류로 전환하고 있다. 하지만 화주기업들이 제3자 물류기업들에게 통합적인 물류서비스를 위탁하는 경우는 많지 않다. 이에 본 연구에서는 국내 제3자 물류기업 현황과 문제점을 분석하고 프랜차이즈 기업 본 아이에프의 제3자 물류 활성화에 대한 사례를 통하여 향후 발전방안을 제시하였다.

  • PDF

온라인 구전정보 수용자의 지각된 정보유용성과 자기효능감이 구전정보 수용의도에 미치는 영향에 관한 연구: 의견고수와 구전수용의 비교 (Investigating the Influence of Perceived Usefulness and Self-Efficacy on Online WOM Adoption Based on Cognitive Dissonance Theory: Stick to Your Own Preference VS. Follow What Others Said)

  • 이정현;박주석;김현모;박재홍
    • Asia pacific journal of information systems
    • /
    • 제23권3호
    • /
    • pp.131-154
    • /
    • 2013
  • New internet technologies have created a revolutionary new platform which allows consumers to make decision about product price and quality quickly and provides information about themselves through the transcript of online reviews. By expressing their feelings toward products or services on virtual opinion platforms, users extend their influence into cyberspace as electronic word-of-mouth (e-WOM). Existing research indicates that an impact of eWOM on the consumer decision process is influential. For both academic researchers and practitioners, investigating this phenomenon of information sharing in online website is essential given the increasing number of consumers using them as sources of purchase decisions. It is worthwhile to examine the extent to which opinion seekers are willing to accept and adopt online reviews and which factors encourage adoption. Discerning the most motivating aspects of information adoption in particular, could help electronic marketers better promote their brand and presence on the internet. The objectives of this study are to investigate how online WOM influences a persons' purchase decision by discovering which factors encourage information adoption. Especially focused on the self-efficacy, this research investigates how self-efficacy affects on information usefulness and adoption of online information. Although people are exposed to same review or comment about product or service, some accept the reviews while others do not. We notice that accepting online reviews mainly depends on the person's preference or personal characteristics. This study empirically examines this issue by using cognitive dissonance theory. Specifically, in the movie industry, we address few questions-is always positive WOM generating positive effect? What if the movie isn't the person's favorite genre? What if the person who is very self-assertive so doesn't take other's opinion easily? In these cases of cognitive dissonance, is always WOM generating same result? While many studies have focused on one direct of WOM which indicates positive (or negative) informative reviews or comments generate positive (or negative) results and more (or less) profits, this study investigates not only directional properties of WOM but also how people change their opinion towards product or service positive to negative, negative to positive through the online WOM. An experiment was conducted quantitatively by using a sample of 168 users who have experience within the online movie review site, 'Naver Movie'. Users were required to complete a survey regarding reviews and comments taken from the real movie page. The data reflected user's perceptions of online WOM information that determined users' adoption level. Analysis results provide empirical support for the proposed theoretical perspective. When user can't agree with the opinion of online WOM information, in other words, when cognitive dissonance between online WOM information and users' preference occurs, perceived self-efficacy significantly decreases customers' perception of usefulness. And this perception of usefulness plays an important role in determining users' intention to adopt online WOM information. Most of researches have been concentrated on characteristics of online WOM itself such as quality or vividness of information, credibility of source and direction of online WOM, etc. for describing effect of online WOM, but our results suggest that users' personal character (e.g., self-efficacy) plays decisive role for acceptance of online WOM information. Higher self-efficacy means lower possibility to accept the information that represents counter opinion because of cognitive dissonance, whereas the people that have lower self-efficacy are willing to accept the online WOM information as true and refer to purchase decision. This study suggests a model for understanding role of direction of online WOM information. Also, our result implicates the importance of online review supervision and personalized information service by confirming switching opinion negative to positive is more difficult than positive to negative through the online WOM information. This implication would help marketers to manage online reviews of their products or services.

베트남 농업구조개혁과 협동조합의 계약영농: 중부베트남의 농촌을 사례로 (Contract Farming Through a Cooperative to Boost Agricultural Sector Restructuring: Evidence from a Rural Commune in Central Vietnam)

  • 드응 티 투 하;김두철
    • 한국경제지리학회지
    • /
    • 제25권1호
    • /
    • pp.109-130
    • /
    • 2022
  • 베트남 정부는 농업구조개혁을 위해 새로운 협동조합을 통한 계약농업을 추진하고 있으며, 베트남 농민은 정책에 따른 구조 전환의 영향을 직접적으로 받고 있다. 따라서 정책 과정에 따른 농민들의 토지이용 및 생존전략을 이해하는 것은 이러한 농업개발정책에 있어 필수적이라 할 것이다. 이 연구는 중부 베트남의 전형적인 농촌 마을 중 하나인 빈다오사(社)(Binh Dao commune)를 대상으로 이루어졌다. 이 논문에서는 먼저 GIS을 이용한 토지이용 변화 분석 및 190명의 농민과의 심층 인터뷰를 통해 계약농업 도입 전후의 농촌 노동력 구조와 생업활동의 변화와 그 원인을 분석하였다. 그 결과, 새로운 협동조합을 통한 계약농업은 농민-협동조합-농산물판매회사로 이어지는 수직적 가치사슬을 형성하고, 기계화를 통한 효율적 토지이용에 기여하여, 생산성을 향상시키고 농산물 시장가격의 리스크로 부터 농민들을 보호하는 순효과를 가져왔다는 것이 밝혀졌다. 한편, 이러한 긍정적인 효과에도 불구하고, 베트남의 협동조합을 통한 계약농업은 애초에 의도했던 농촌 노동력을 비농업부문으로 재배치하지는 못한 것으로 나타났다. 오히려 빈다오사(社)의 농민들은 농업구조개혁 과정에서 경작면적을 늘리려는 경향이 있었다. 즉, 베트남 농촌지역의 제한적인 농외 취업기회로 인해, 빈다오사(社)의 농민들은 기계화와 생산성 향상으로 생긴 잉여 가족노동력을 역설적으로 농업부문에 집중시키는 생존전략을 선택한 것으로 보여된다. 그 결과 빈다오사(社)의 농민들은 협동조합의 계약농업을 통한 농업구조개혁에도 불구하고 여전히 가족노동력에 의존한 소농체제에 머물러 있다.

대형마트 충성도의 이중경로모형 (Dual Path Model in Store Loyalty of Discount Store)

  • 지성구;이인구
    • 한국유통학회지:유통연구
    • /
    • 제15권1호
    • /
    • pp.1-24
    • /
    • 2010
  • 국내 대형마트 점포 수는 2008년 기준 403개로 포화시점에 근접하고 있다. 이러한 경쟁상황에서 '점포충성도(store loyalty)'가 지속적 경쟁우위를 위한 전략적 도구로써 그 활용성이 점점 더 중요시 되고 있다. 다양한 관점에서 점포충성도를 대형마트 연구의 핵심적 과제 다루어왔으나, 통합적인 연구 접근 방법이 미흡한 실정이다. 따라서 본 연구에서는 통합적 관점에서 점포충성도가 형성되는 두 가지 경로를 제안하였다. 이중경로모형은 첫째, 내재적 경로 '서비스품질$\rightarrow$고객만족$\rightarrow$점포충성도', 둘째, 외재적 경로 '점포개성$\rightarrow$점포동일시$\rightarrow$점포 충성도'로 구성된다. 조사대상은 대형마트를 이용하는 소비자들을 대상으로 진행하였으며, 구조방정식모형 분석을 통하여 제안된 이중경로모형의 적합성 및 가설검증을 실시하였다. 연구결과, 모형의 적합지수들은 상당히 좋은 값들을 보여주고 있다. 또한 본 연구에서 새롭게 제시된 내재적 경로인 서비스품질은 고객만족에 정의 영향을 미치고, 고객만족은 결과변수인 대형마트의 점포충성도에 매우 유의하게 영향을 준 것으로 나타났다. 그리고 외재적 경로에서 대형마트의 점포개성은 점포동일시에 긍정적인 영향을 주고 매개변수인 점포개성은 점포충성도에 영향을 미치는 것으로 나타났다. 이를 통해 본 연구는 대형마트의 점포충성도 형성에 관한 두 가지 경로를 제시함으로써, 이론적, 관리적 시사점을 도출하였고 연구의 한계점과 미래연구방향을 제시하였다.

  • PDF