• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2001년도 e-Biz World Conference
• /
• pp.499-520
• /
• 2001

◈ B2B e-commerce is set to grow significantly in the next 5 years ◈ There is a growing trend towards leveraging the information asset to win new business in the Maintenance, Repair and Overhaul (MRO) market ◈ After-market service is forecast to be a significant element of the B2B market ◈ Existing standards do not fully address the product support requirement ◈ PLCS standards will allow support information to be aligned with the changing product over its entire life cycle ◈ Adoption of PLCS standard will lead to reduced operating costs and increased product availability.(omitted)

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.77-85
• /
• 2000

The object of this paper is developing of a simulation model for performance evaluation of ai defense-gun system. We developed a three-step kill probability of areal target in case of one gun on one target considering : 1) estimating the target and warhead intercept point, 2) target vulnerability and 3) computing the kill probability. We used a Monte Carlo simulation method. This model can be used for probabilistic analysis giving results of sufficient accuracy with minimum requirement of input data. Also we developed a computer program according proposed algorithm and a set of experimental results using the proposed method are shown.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.129-136
• /
• 2004

Environmental factors for automotive consist of temperature, humidity, vibration(sine & random), gas, an electrical load and so on. These environmental factors are impressed in a automotive. Dependability is essential requirement in many electronic parts. Among components of automotive, the connector connecting electrical signals is one of the most important parts. Automotive -connector is inspected according to each manufacturer's test standard in which dependability should be considered. This paper aims to verify that current test standard is suitable for dependability, and present an inductive life test for automotive connector based on the field data in use-condition.

• ETRI Journal
• /
• 제29권2호
• /
• pp.153-161
• /
• 2007

In this paper, we analyze the algorithm of the methodology developed by ITU for the calculation of spectrum requirements of IMT-Advanced. We propose an approach to estimate user density using traffic statistics, and to estimate spectrum efficiencies using carrier-to-interference ratio distribution and capacity theory as well as experimental data under Korean mobile communication environments. We calculate the IMT-Advanced spectrum requirements based on the user density and spectral efficiencies acquired from the new method. In the case of spectral efficiency using higher modulation and coding schemes, the spectrum requirement of IMT-Advanced is approximately 2700 MHz. When applying a $2{\times}2$ multiple-input multiple-output (MIMO) antenna system, it is approximately 1500 MHz; when applying a $4{\times}4$ MIMO antenna system, it is approximately 1050 MHz. Considering that the development of new technology will increase spectrum efficiency in the future, the spectrum requirement of IMT-Advanced in the Korean mobile communication environment is expected to be approximately 1 GHz bandwidth.

• 인터넷정보학회논문지
• /
• 제17권5호
• /
• pp.25-32
• /
• 2016

There has been a rapid growth in the development of mobile application resulting from its wide usage for online transaction, data storage and exchange of information. However, an important issue that has been overlooked is the lack of emphasis on the security issues at the early stage of the development. In fact, security issues have been kept until the later stage of the implementation of mobile apps. Requirements engineers frequently ignore and incorrectly elicit security related requirements at the early stage of mobile application development. This scenario has led to the failure of developing secure and safe mobile application based on the needs of the users. As such, this paper intends to provide further understanding of the real challenges in extracting security attributes for mobile application faced by novice requirements engineers. For this purpose, two experiments on eliciting security attributes requirements of textual requirements scenario were conducted. The performance related to the correctness and time taken to elicit the security attributes were measured and recorded. It was found that the process of eliciting correct security attributes for mobile application requires effort, knowledge and skills. The findings indicate that an automated tool for correct elicitation security attributes requirement could help to overcome the challenges in eliciting security attributes requirements, especially among novice requirements engineers.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.726-737
• /
• 2017

The use of energy storage systems (ESSs) has become a feasible solution to solve the wind power intermittency issue. However, the use of ESSs increases the system cost significantly. In this paper, an optimal power flow control scheme to minimize the ESS capacity is proposed by using the zero-phase delay low-pass filter which can eliminate the phase delay between the dispatch power and the wind power. In addition, the filter time constant is optimized at the beginning of each dispatching interval to ensure the fluctuation mitigation requirement imposed by the grid code with a minimal ESS capacity. And also, a short-term power dispatch control algorithm is developed suitable for the proposed power dispatch based on the zero-phase delay low-pass filter with the predetermined ESS capacity. In order to verify the effectiveness of the proposed power management approach, case studies are carried out by using a 3-MW wind turbine with real wind speed data measured on Jeju Island.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.655-660
• /
• 2001

The performance test of a centrifugal compressor for APU(Auxiliary Power Unit) which is developed by the collaborative research of KARI and Samsung TechWin has been conducted. The investigated compressor consists of a curved inlet, a centrifugal impeller, a channel diffuser and a plenum chamber. The experiments were carried out in an open-loop centrifugal compressor test rig driven by a turbine. For three different diffusers, overall performance data were obtained at 80%, 90% and 97% of design speed. For the initially designed wedge-type diffuser, test results showed that the compressor was operated at a higher mass flow rate than the design requirement. By reducing the diffuser throat area, the compressor operating range was shifted to lower mass flow rate range. The test result of redesigned wedge-type diffuser showed high pressure loss. To reduce the diffuser loss, diffuser inlet radius was increased and airfoil-type of diffuser was adopted. This airfoil-type diffuser showed reasonal results in terms of design requirement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.103-109
• /
• 2002

This research is aiming to specify the requirement of the investment such as initial cost, running cost earning rate to make effective investment considering the purpose of remodeling and economical value of store building enough to meet the initial purpose of remodeling. The review of earning rate for economical evaluation was performed by the on-site auditing on the structure and function of the building and applying the assessment simulation program, which is to find the possible business model to identify the requirement of building owner through case study. After the research, the following results are obtained. First, it is important that many aspects should be carefully analysis and the best method should be selected as characteristics of remodeling can be defer each other in their implementations. Second, though the remodeling of exist buildings to promote the functions has been applied. no suitable assessment tool has bee developed for deciding the level of remodeling in the view of economical efficiency so far. Third, the economical benefit was evaluated by analysing annual earning rate which is applied by investment items and recovery period for the investment. More specific data bate should be established to apply the suggested economic accession in business enough to forecast the future circumstances. More researches should be promoted on this area continuously as well as the integrated economic evaluation of remodeling on existing building.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.643-652
• /
• 2000

본 논문에서는 임펄스 잡음과 주파수 선택성 레일리 페이딩이 공존하는 통신로에서 OFDM/ QPSK 시스템의 오율 성능을 해석하고, 성능 개선 기법으로 컨벌루션 부호화 기법을 적용하여 성능 개선을 도모하였다. 임펄스 잡음과 주파수 선택성 레일리 페이딩이 공존하는 채널에서는 보호 구간 길이보다 채널 지연 시간이 짧은 경우에 좋은 오율 성능을 나타내고, 보호 구간 길이를 벗어나면 오율 성능이 현격히 떨어짐을 알 수 있었다. 그리고 채널 상에서 존재하는 강한 임펄스 잡음의 영향을 받으면 오율 성능이 약 $10^{-1}$ 정도로 떨어짐을 알 수 있었다. 또한 임펄스 잡음과 주파수 선택성 레일리 페이딩이 공존하는 통신로에서는 부호화기법을 적용하지 않으면 음성 서비스조차 지원할 수 없는 반면에, 컨벌루션 부호화 기법을 적용하면 데이터 서비스까지 지원할 수 있음을 알 수 있었다.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1489-1496
• /
• 2010

A feed forward differential architecture of analog PRML decoder is investigated to implement on analog parallel processing circuits. The conventional PRML decoder performs the trellis processing with the implementation of single stage in digital and its repeated use. The analog parallel processing-based PRML comes from the idea that the decoding of PRML is done mainly with the information of the first several number of stages. Shortening the trellis processing stages but implementing it with analog parallel circuits, several benefits including higher speed, no memory requirement and no A/D converter requirement are obtained. Most of the conventional analog parallel processing-based PRML decoders are differential architecture with the feedback of the previous decoded data. The architecture used in this paper is without feedback, where error metric accumulation is allowed to start from all the states of the decoding stage, which enables to be decoded without feedback. The circuit of the proposed architecture is simpler than that of the conventional analog parallel processing structure with the similar decoding performance. Characteristics of the feed forward differential architecture are investigated through various simulation studies.