• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.74-83
• /
• 2014

This paper proposes a study on the configuration of balancing of plant(BOP) and implementation of battery management system(BMS) functions for vanadium redox flow battery(VRFB) and propose a method consists of sensor and required design specifications BOP system configuration. And it proposes an method of the functions implementation and control algorithm of the BMS for flow battery. Functions of BMS include temperature control, the charge and discharge control, flow control, level control, state of charge(SOC) estimation and a battery protection through the sensor signal of BOP. Functions of BMS is implemented by the sensor signal, so it is recognized as a very important factor measurement accuracy of the data. Therefore, measuring a mechanical signal(flow rate, temperature, level) through the BOP test model, and the measuring an electrical signal(cell voltage, stack voltage and stack current) through the VRFB charge-discharge system and analyzes the precision of data in this paper. Also it shows a good charge-discharge test results by the SOC estimation algorithm of VRFB. Proposed BOP configuration and BMS functions implementation can be used as a reference indicator for VRFB system design.

• Journal of Korea Multimedia Society
• /
• v.17 no.8
• /
• pp.1020-1024
• /
• 2014

The environment information such as dust, temperature, humidity, illumination and gas are very important in daily life. We implemented multi-sensor system which made for measuring an environment by using Arduino, ZigBee, and Appinventor. We also designed a packet for transmitting environment data. The data are sent to the server via ZigBee and then it communicates to a smart phone via WI-Fi. In this study, we added divers sensors, designed a protocol which made for transfer several kinds of data and improve mobility for real time monitoring by using smart phones. The system was worked well and the data was transmitted correctly to the smart phone.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.63.2-63.2
• /
• 2010

Solar radiation data are used in several forms and for a variety of purposes. The most detailed information we have is beam and diffuse solar radiation on a horizontal surface, by hours, which is useful in simulations of solar processes. Daily data are more often available and monthly total solar radiation on horizontal surface can be used in some process design methods. However, as performance is generally not linear with solar radiation, the use of average may lead to serious errors if non-linearities ara not taken into account. It is also possible to reduce radiation data to more manageable forms by statistical methods. The control of the quality of most measurements is relegated to the control of the measuring instruments and measuring processes themselves. An accurate measurement will usually result from the use of a high-quality instrument that has been accurately calibrated and is properly used by a qualified individual.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.395-402
• /
• 2016

In these days, the wearable devices have been developed for measuring biological data effectively. However, wearable devices have tissue allege and noise problem. Also, it is impossible for a remote center to identify the person whose data are measured by wearable devices, which could trigger a communication problem over treatment. To solve these problems, biometric measurement based on a non-contact method, such as face image sequencing is necessary. This makes it possible to measure biometric data without any operation and side effects. This system can monitor the biological signals of people in real time without allege and noise and simultaneously identify them. In this paper, we propose an authentication process while measuring biometric data, through a non-contact method.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1986-1993
• /
• 2003

The spatially resolved spray volume fractions from both line-of-sight data of direct measuring cells and a laser diffraction particle analyzer (LDPA) are tomographically reconstructed by the Convolution Fourier transformation, respectively. Asymmetric sprays generated from a twin-hole injector are tested with 12 equiangular projections of measurements. For each projection angle, a line-of-sight integrated injection rate was measured using a direct sampling method and also a liquid volume fraction from a set of line-of-sight Fraunhofer diffraction measurements was measured using a light extinction method. Interpolated data between the projection angles effectively increase the number of projections, significantly enhancing the signal-to-noise level in the reconstructed data. The reconstructed volume fractions from the direct sampling cells were used as reference data for evaluating the accuracy of the volume fractions from the LDPA.

• Journal of the Ergonomics Society of Korea
• /
• v.7 no.2
• /
• pp.23-30
• /
• 1988

The methods suggested up to now for 3-dimensional anthroponetry require much efforts and costs in measuring and analysing. To solve these problems, we adopt the methods such as Moire Interferometry, Image processing and Computer Vision Technique which are efficient in processing anthropomorphic data. Moire contourgraph was constructed by using Ar-ion laser as a light source (2 Watt power and 5145 A wavelength) and laser beam expander(20X). Image data can be 3-dimensionally reconstructed as the surface patch and geographical relation between faces expressed by mash-point and edges as units. This research is focused on the followings; 1) Development of an economical and reliable measuring method. 2) Design of reproduction methods of 3-dimensional human body data. Therefore, our research makes it possible to study further advanced quantitative analysis of human body.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.95-95
• /
• 2020

Urban flooding occurs in the form of internal-water inundation on roads and lowlands due to heavy rainfall. Unlike in the case of rivers, inundation in urban areas there is lacking in research on predicting and warning through measurement data. In order to analyze urban flood patterns and prevent damage, it is necessary to analyze flooding measurement data for various rainfalls. In this study, the pattern of urban flooding caused by rainfall was analyzed by utilizing the urban flooding measuring sensor, which is being test-run in the flood prone zone for urban flooding management. For analysis, 2019 rainfall data, surface water depth data, and water level data of a street inlet (storm water pipeline) were used. The analysis showed that the amount of rainfall that causes flooding in the target area was identified, and the timing of inundation varies depending on the rainfall pattern. The results of the analysis can be used as verification data for the urban inundation limit rainfall under development. In addition, by using rainfall intensity and rainfall patterns that affect the flooding, it can be used as data for establishing rainfall criteria of urban flooding and predicting that may occur in the future.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.137-145
• /
• 2016

The explosive growth of social networking services based on smart devices popularize these relationships and activities online in accordance with the far larger impact of this on the real life offline, the interest and importance for the online activity is increasing. In this study, factors affecting the SNS activity are defined by object, user, influence direction, influence distance and proposed a method to measure organic terms in effect between the SNS users. Influence Direction and Influence Strength (or Distance) are elaborated by using the existing influence measurement element such as structured data - the number of friends, the difference between the number of contacts - and the new influence measurement element such as unstructured data - gap between the former time and the latter time, preference and type of response behavior - that occur in social network service. In addition, the system for collecting and analysing data for measuring influence from social network service and the process model on the method for measuring influence is tested by using sample data on Facebook and explained the implementation probability.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.151-163
• /
• 1998

The purpose of this study is to find options which reduce the job stress and to enhance morale through a variable analysis, and also apply this data in the legal and administration fields. The data for the research was obtained from 217 dental hygienists working in the dental clinics, dental hospitals and university's dental hospitals' in Seoul. The tool used by this study was a Questionnaire measuring on-the-job stress of dental hygienists, was a modified and revised. The Questionnaire version used to measure bank's job stress and used to suggest options by Dae-ha Yoon(1991). Classification of items for measuring job stress was based on Theoretical Study on Job Stress by Dae-hyon Song(1986). The scale used in study was the two points (yes or no in the job stress) scale measuring for variables. The period of data collection was 30 days from December 4, 1995 to January 5, 1996. The methods of data collection were self-writing, direct visit, and postal Questionnaire answering, 224 copies of Questionnaire data were collected, but only 217 copies were used. 7 copies could not be analyzed, were not used for this study. The data analysis was conducted by SPSS after coding the collected raw data. The general characteristics was obtained from real digits and percentages. In order to analyze the difference of sub-variables against the job stress based on general characteristics. Mean, Standard Deviation, and F test (ANDVA) were conducted. The following were the results of job stress variables: 1. Meaningful variable affecting the working organization, is compensation system(p〈0.03). 2. Meaningful variable affecting the working period, is work overload(p〈0.02). 3. Meaningful variable affecting average patients per day, is the career management and payment(p〈0.04, p〈0.01). 4. Meaningful variable affecting number of staff, is the comrade relationship, role conflict among patients, work overload, and job overload(p〈0.000, p〈0.05, p〈0.04, p〈0.01). The comrade relationship is most affected to the number of staffs aides. 5. Meaningful variables affecting job diversion, are the desire and value, the non-role play, and the environment(p〈0.003, p〈0.02, p〈0.005).

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.123-127
• /
• 2003

For disseminating a ney IEC international standard of critical trmperature of NbTi,Nb$_3$Sn and Bi-2223 Composite Suterconductors, we develpted a measuring system and studied standardization of test method. The measuring system consisted of cryogenic reservoir, base plate, thermometer, voltmeter and current source. Various specimens of the Nbti, Nb$_3$Sn and Bi-2223 composite superconductors were tested using this system for measuring their critical temperatures. After measuring the resistance-temperature relation, the data were compensated with thermoelectric voltages for NbTi Nb$_3$Sn specimens. NbTi specimens showed 9.2 K ~ 9.5 K of transition temperature and Nb$_3$Sn specimen showed about 18 K. Bi-2223 specimens showed 104 K ~ 107 K of transition temperature.