• Resources Recycling
• /
• v.11 no.4
• /
• pp.17-26
• /
• 2002

As it is not allowed to landfill sludge from 2001 by the act of waste management, new systems of treating sludge are necessary. Life Cycle Assessment, LCA, is a method for evaluating systems in the aspect of environment and also can apply to decision making tools for policy making. The objective of this study is to assess 3 alternatives of landfill: incineration, composting, solidification by applying LCA. This study is done with operation data from incinerator in Kuri, composting facility in Nanjido, solidification facility in Kimpo and electricity and transport data of Korea in 1998 are used. The results of the LCA is that the composting system is most environmental-friendly and the solidification system is least environmental-friendly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.251-262
• /
• 2003

LCP(Life Cycle Profiles) of bridge structures are indispensable for the LCC(Life Cycle Cost) evaluations of bridge system. The bridge under considerations may be newly-designed one or one in service. Thus, a systematic study of LCP is essential for both reliable LCC evaluation and strategic bridge management. LCP is mainly influenced by the structural environment in nature. However, in Korea, LCC evaluation has been performed with the LCP of foreign research results or only with the pieces of professional engineers' opinion. Therefore, to alleviate the drawbacks of foreign LCP and to enhance the reliability of current LCP, LCP should be established using the available data in bridge management system(BMS). In this study, LCP along with a subset of the BMS data was investigated and several mathematical expressions were proposed and evaluated. The condition ratings of a bridge were trasformed into the numerical indices through fuzzy logics with real field data. From the numerical results, it is concluded that the mathematical LCP model of $y=\sqrt{y^2_0-at}$ is shown to be the fittest one (R=0.815) to express the condition rating varied with the age. This has been drawn from the case study of slab bridges under the similar conditions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.71-83
• /
• 2022

In this study, an indicator and assessment system for evaluating the monthly hydrological cycle was prepared using simple factors such as the landuse status of the watershed and topographic characteristics to the dynamic water balance model (DWBM) based on the Budyko framework. The parameters a1 of DWBM are introduced as hydrologic cycle indicators. An indicator estimation regression model was developed using watershed characteristics data for the introduced indicator, and an assessment system was prepared through K-means cluster analysis. The hydrological cycle assessment system developed in this study can assess the hydrological cycle with simple data such as land use, CN, and watershed slope, so it can quickly assess changes in hydrological cycle factors in the past and present. Because of this advantage is expected that the developed assessment system can predict changes in the hydrological cycle and use an auxiliary tool for policymaking.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.169-174
• /
• 2001

Low cycle fatigue tests are performed on high strength low alloy steels that be developed for submarine material. The relation between absorbed plastic strain energy and numbers of cycle to failure is examined in order to predict the low cycle fatigue life of structural steels by using plastic strain energy method. The cyclic properties are determined by a least square fit techniques. The life predicted by the plastic strain energy method is found to coincide with experiment data and results obtained from the Coffin-Manson method. Also the cyclic behavior of structural steels is characterized by cyclic softening with increasing number of cycle at room temperature. Especially, low cycle fatigue characteristics and microstructural changes of structural steels are investigated according to changing tempering temperatures. In the case of PFS steels, the $\varepsilon$-Cu is formed in 550C of tempering temperature and enhances the low cycle fatigue properties.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.2
• /
• pp.157-162
• /
• 2010

Open reading frame 35 (bm35) of the Bombyx mori nucleopolyhedrovirus (BmNPV) is a special gene whose homologues are only found in some group-I nucleopolyhedroviruses, suggesting that bm35 plays a specific role in the viral life cycle. This paper described the characterization of BmNPV bm35. Computerassisted sequence analysis shows that a putative RING finger motif is observed in the protein, Bm35 encoded by bm35. The coding sequence of bm35 was amplified and subcloned into the vector pET30a(+) and the $(His)_6$-tagged fusion protein His-Bm35 was expressed in the Escherichia coli BL21 (DE3) LysS cells. The bm35 transcript and Bm35 protein were detected in BmNPV-infected BmN cells at 12~48 h post infection (p.i.) by RT-PCR and Western blot analysis using the polyclonal antibody generated by immunizing a rabbit with purified $(His)_6$-tagged Bm35, suggesting that bm35 is synthesized in the late stage of BmNPV infection cycle. Bm35 was not a structural component associated with budded virus (BV) and occlusion derived virus (ODV). These data indicated that bm35 is a functional gene in the BmNPV life cycle.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.241-248
• /
• 2021

High cycle fatigue life for the cables with two different types of clamps is estimated comparatively through acceleration testing. The high cycle fatigue fracture of overhead lines is caused mainly by the aeolian vibration which is induced by vortex shedding. It is necessary to manage the integrity of cables continuedly considering that the aeolian vibration is unavoidable since it occurs in steady and relatively low wind velocity. Two types of clamps which are largely used for overhead lines of the distribution grids are selected and failure data are obtained by step stress testing with a electrodynamic shaker with them. The inverse power law is assumed to describe the stress-life relationship and the fatigue limit at any specified life is supposed to follow Weibull distribution. The life of the cable is defined as the number of cycles to the time that one of strands is completely broken. Finally, the fatigue limits of the cables with two clamp types are estimated at the reference life of 500 Mcycles and compared each other based on a bending vibration amplitude.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.197-205
• /
• 2012

This paper analyzes the beef cycle and forecasts the number of Hanwoo. This study uses Sine function for this purpose. Data shows that beef cycle varies from five to twelve years and the cycle becomes longer as time passes. The adjusted $R^2$ of the estimated model is 0.95. The forecasted value based on this model for the number of Hanwoo is 1.6-1.8 million heads in lower bound and 3.2-3.7 million heads in upper bound, where the peak points are slightly different according to cycles. These predicted values imply the instability of number of Hanwoo and corresponding farm income, so we have to prepare adequate policies to cope with it.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.331-341
• /
• 2014

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

• Corrosion Science and Technology
• /
• v.3 no.2
• /
• pp.72-80
• /
• 2004

Recently, the demand on the practical application of life-cycle cost effective design and rehabilitation of bridges is rapidly growing in civil engineering practice. However, in spite of impressive progress in the researches on the Life-Cycle Cost (LCC), the most researches have only focused on the theoretical point but did not fully incorporate the critical issues for the practical implementation. Thus, this paper is intended to suggest a systemic integrated approach to the practical application of various LCC methodologies for the design and rehabilitation of bridges, For that purpose, hierarchical definitions of LCC models are presented to categorize the approach of LCC assessment applicable for the practical implementation. And then, an integrated LCC system model is introduced with an emphasis on data uncertainty assessment and user-friendly knowledge-based database for its successful implementation. Finally, in order to demonstrate the LCC effectiveness for design and rehabilitation of real bridge structures, illustrative examples are discussed.

• Journal of KIBIM
• /
• v.6 no.4
• /
• pp.9-17
• /
• 2016

Currently whole-house refurbishment for substantial energy efficiency improvement of existing housing stock is needed to achieve the targeted 80% CO2 emission reduction. As whole-house refurbishment requires a larger capital investment for lower CO2 emission, the simultaneous use of Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) methodologies are recommended to generate affordable refurbishment solutions. However, two methodologies are difficult to use due to a lack of proper LCC and LCA datasets. As a response to the current problems, many researchers explore potentials in Building Information Modelling (BIM) to improve current construction practice. As a result, a BIM tool - IES IMPACT (Integrated Material Profile And Costing Tool) - has been introduced to the UK construction industry for simultaneous calculation of LCC and LCA. Thus, this research aims at examining the capability and limitation of the IES VE/IMPACT as a BIM tool for whole-house refurbishment. This research reveals that the IES VE/IMPACT is feasible for whole-house refurbishment by providing LCC and LCA information simultaneously for informed decision on refurbishment solution selection. This research shed lights on the current problems lying on the data exchange between two different BIM tools. It is revealed that additional efforts from construction professionals and industry are required to make reliable BIM objects library with LCC and LCA datasets.