• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.155-160
• /
• 1993

A design method for web frame scantling on engine room structures was described. The parameters determining the scantling of web frame were studied on the basis of the empirical ship's data. It is found that the parameters determining the scanting of web frame consist of tween deck height, main engine and propeller excitation frequency, scantling draft, web frame spacing, the number of decks and main engine BHP etc. And a formula proposed by empirical ship's data was established in view points of static and dynamic structural behavior. In this study, it can be shown that at initial design stage, a method for web frame scantling of engine room structure is provided as very practical design processes.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.336-340
• /
• 2003

The frame synchronization should be acquired before performing other data-aided receiving algorithms, such as data-aided channel equalizing, beam-forming and phase, symbol timing, and frequency synchronizing, since all of them are using preamble or training sequence to estimate the amount of error from the received signal. In this paper, we present a new frame synchronization scheme for underwater ultrasonic image burst transmission system, which computes the correlation between received symbol sequence and one CAZAC sequence, composed of the latter half of the first CAZAC sequence of preamble and the first half of the second CAZAC sequence of preamble and then compares a threshold value. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.24-35
• /
• 2018

In wireless communications environments, a link adaptation technique that selects the proper rate from among several transmission rates is adopted to cope with variations in channel status. In block coded modulation, the frame time and/or the block length can be adjusted to the channel status. A smaller frame time can cause inter-frame interference (IFI), however, a larger frame time can reduce the data rate. Therefore, frame time is the design factor decided by a tradeoff between performance and the data rate. This paper presents a method to determine the frame time based on the processing gain for the channel model, CM1~CM4, recommended by IEEE 802.15a. Also, a link adaptation technique for block coded modulation is proposed for efficient communications by varying the frame time and the block length. Through simulation, link adaptation can be carried out with a step size of 2~5 nsec in a frame time range of 14~ 50 nsec for channel models CM1~CM4.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.925-938
• /
• 2010

Depending on network conditions, a communication network could be overloaded when media are transmitted. Research has been carried out to lessen network overloading, such as by filtering, load distribution, frame dropping, and other methods. Among these methods, one of the most effective is frame dropping, which reduces specified video frames for bandwidth diminution. In frame dropping, B-frames are dropped and then I- and P-frames are dropped, based on the dependency among the frames. This paper proposes a scheme for protecting copyrights by encryption, when frame dropping is applied to reduce the bandwidth of media based on the MPEG-4 file format. We designed two kinds of frame dropping: the first stores and then sends the dropped files and the other drops frames in real time when transmitting. We designed three kinds of encryption methods using the DES algorithm to encrypt MPEG-4 data: macro block encryption in I-VOP, macro block and motion vector encryption in P-VOP, and macro block and motion vector encryption in I-, P-VOP. Based on these three methods, we implemented a digital rights management solution for MPEG-4 data streaming. We compared the results of dropping, encryption, decryption, and the quality of the video sequences to select an optimal method, and found that there was no noticeable difference between the video sequences recovered after frame dropping and the ones recovered without frame dropping. The best performance in the encryption and decryption of frames was obtained when we applied the macro block and motion vector encryption in I-, P-VOP.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.109-113
• /
• 2010

We present the minimum weight optimum design of cross sectional for frame structures subject to natural frequency. The optimum design in this paper employ discrete and continuous design variables and Genetic Algorithms. In this paper, Genetic Algorithms is used in optimization process, and be used the method of Elitism and penalty parameters in order to improved fitness in the reproduction process. For 1-Bay 2-Story frame structure, in examples, continuous and discrete design variables are used, and W-section (No.1~No.64), from AISC, discrete data are used in discrete optimization. In this case, Exhaustive search are used for finding global optimum. Continuous variables are used for 1-Bay 7-Story frame structure. Two typical frame structure optimization examples are employed to demonstrate the availability of Genetic Algorithms for solving minimum weight optimum of frame structures with fundamental and multi frequency.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.253-256
• /
• 2001

This paper describes a high speed MAC(Media Access Control) function chip for IEEE 802.11 MAC layer protocol. The MAC chip has control registers and interrupt scheme for interface with CPU and deals with transmission/reception of data as a unit of frame. The developed MAC chip is composed of protocol control block, transmission block, and reception block which supports the BCF function in IEEE 802.11 specification. The test suite which is adopted in order to verify operation of the MAC chip includes various functions, such as RTS-CTS frame exchange procedure, correct IFS(Inter Frame Space)timing, access procedure, random backoff procedure, retransmission procedure, fragmented frame transmission/reception procedure, duplicate reception frame detection, NAV(Network Allocation Vector), reception error processing, broadcast frame transmission/reception procedure, beacon frame transmission/reception procedure, and transmission/reception FIEO operation. By using this technique, it is possible to reduce the load of CPU and firmware size in high speed wireless LAN system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.951-957
• /
• 2002

When retrieving voluminous capacity of video image data, it is necessary to provide synopsized frame lists of video image data for indexing and replaying at the exact point where the user want to retrieve. We apply Mean Squared Error method to extract certain pixel value from diagonal direction of a frame. The RGB value of a pixel extracted from each frame is saved in a matrix form, and this frame is retrievedas a scene change point if the compared value of two points met the certain condition. Also implement the algorithm and provide a way to seize entire structure of video image and the point of scene changes. finally, we analyze and prove that our method has better performance compared with the others.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.439-446
• /
• 1999

This research was performed to study the actual behavior of 1-2W type pipe greenhouse under the influence of typhoon by measuring the vairous strains instructural materials. These results can eventually be utilized in the desgin criteria as well as in the modification of conventional equaltion for calcu more realistic wind loads. Tehfirst data under the influence of Typhoon Olga arrived in Jinju on Aug. 1999. Were obtained by strain gage with 10 sensor points. According to the data obtained, the typical variation ofstrain depending on wind patter could be observed. The strains in structural frame were fluctuated very sensitively depending on the direction and magnitude of wind velocity. But some of the data were lost or missed by system's failure. A kind of inherent vibration pattern of greenhouse pipe frame was observed from the plotted data, but this phenomenon is not so clear as to be separated from the overall fluctuation so far. This experimental research is expected to be continued as a long term project to measure and analyze the strain pattern of structural frame depending on the various locations and section characteristics by wasy of adopting more efficientg instrument with sufficient number of measuring points and accuracy.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1294-1296
• /
• 2007

The IEEE 802.11 DCF forces neighboring nodes of an active transmitter to switch into inactive state. This conservative nature brings frame latency at transmitter neighborhood. This work exploits the IEEE 802.11n Frame Aggregation scheme to allow simultaneous transmissions from nodes that are neighbors to each-other. This is accomplished by the synchronization of control and data transmissions in slots of fixed length. Proposed scheme reduces the frame latency and improves aggregated network throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3357-3376
• /
• 2015

Wireless sensor network is an important research topic that has attracted a lot of attention in recent years. However, most of the interest has focused on wireless sensor network to gather scalar data such as temperature, humidity and vibration. Scalar data are insufficient for diverse applications such as video surveillance, target recognition and traffic monitoring. However, if we use camera sensors in wireless sensor network to collect video data which are vast in information, they can provide important visual information. Video sensor networks continue to gain interest due to their ability to collect video information for a wide range of applications in the past few years. However, how to efficiently store the massive data that reflect environmental state of different times in video sensor network and how to quickly search interested information from them are challenging issues in current research, especially when the sensor network environment is complicated. Therefore, in this paper, we propose a fast algorithm for extracting key frames from video and describe the design and implementation of key frame extraction and sharing in Android for wireless video sensor network.