• Childhood Kidney Diseases
• /
• v.19 no.2
• /
• pp.148-153
• /
• 2015

Purpose: We investigated trends in antibiotic resistance for gram-negative bacteria in infants with a urinary tract infection (UTI) over 15 years at a single institution. Methods: A retrospective chart review was conducted for children younger than 24 months who visited the emergency room and were diagnosed with a UTI between January 2000 and December 2014. We selected urine culture data that grew Escherichia coli and Klebsiella pneumoniae. Baseline clinical information and results of antimicrobial susceptibility tests were analyzed by dividing the 15-year study time frame into three periods (A: 2000-2004, B: 2005-2009, and C: 2010-2014). Results: During the study period, 478 applicable children were identified (E. coli, 89.7% and K. pneumoniae, 10.3%). Antibiotic resistance to third-generation cephalosporins was increased from period A to period C (A, 2.1%; B, 8.3%; C, 8.8%; P=0.025). Resistance to quinolones also showed a steady pattern during periods A to C, although it was not statistically significant (A, 7.9%; B, 9.7%; C, 12.4%; P=0.221). The incidence of Extended-spectrum ${\beta}$-lactamase (ESBL)-producing gram-negative bacteria increased from period A to period C (A, 1.4%; B, 7.6%; C, 8.2%; P=0.012). Conclusion: This study revealed that the common uropathogens E. coli and K. pneumoniae experienced increasing resistance rates against third-generation cephalosporins and a constant antibiotic resistance to quinolones in children younger than 24 months. We also showed a recent increased incidence of ESBL-producing gram-negative bacteria in patients with community-acquired UTIs. Therefore, it is necessary to actively surveil resistance in order to properly select empirical antibiotics.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.381-392
• /
• 2002

This study attempted to indentify changeability of the factorial structure of kinematic analysis in bowling. Subjects of group composed of three groups : Higher bowers who are national representative bowers with 200 average point and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 and 60 frame per secondary. T-test factorial structure analysis has been used to define variable relations. It was concluded that : 1. The difference of x1, x2, x4, x8, x9, x11, x12, x13 where significant between two group. 2. The difference of number of spin and angle of the back-hand where statistically significant between two group(p<.001, p<.05) 3. The correlation over r=.5 between the kinematic data x1, x2, x3, x9, x10, x11. In the rotation loading matrix Factor 1 was x1, x2, x9, x10 and Factor 2 relates to x3, x11. 4. In order to obtain the factor score as follow as ; Factor 1 = (0.248)X1 + (0.265)X2 + (-0.074)X3 + (0.259)X9 + (0.259)X10 + (-0.025)X11 Factor 2=(-0.016)X1 + (-0.055)X2 + (0.84)X3 + (-0.013)X9 + (-0.007)X10 + (0.553)X11.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.237-247
• /
• 2011

As of 2011, 72 Permanent GPS Stations are installed to control DGPS reference points by the National Geographic Information Institute in South Korea. As the center of the Earth's mass continues to move, the coordinates of the permanent GPS stations become inconsistent over time. Thus, a reference frame using a set of coordinates and their velocities of a global network of stations at a specific period has been used to solve the inconsistency. However, the relative movement of the permanent GPS stations can lower the accuracy of GPS relative positioning. In this research, we first analyzed the data collected daily during the past 30 months at the 40 permanent GPS stations within South Korea and the 5 IGS permanent GPS stations around the Korean Peninsula using a global network adjustment. We then calculated the absolute and relative amount of movement of the GPS permanent stations. We also identified the optimum renewal period of the permanent GPS stations considering the accuracy of relative GPS surveying. Finally, we developed a Korean a Korean crustal movement model that can be used to improvement of accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.249-255
• /
• 2011

The free-stereo mosaics image without GPS/INS and ground control data can be generated by using relative orientation parameters on the 3D model coordinate system. Its origin is located in one reference frame image. A 3D coordinate calculated by conjugate points on the free-stereo mosaic images is represented on the 3D model coordinate system. For determining 3D coordinate on the 3D absolute coordinate system utilizing conjugate points on the free-stereo mosaic images, transformation methodology is required for transforming 3D model coordinate into 3D absolute coordinate. Generally, the 3D similarity transformation is used for transforming each other 3D coordinates. Error of 3D model coordinates used in the free-stereo mosaic images is non-linearly increased according to distance from 3D model coordinate and origin point. For this reason, 3D model coordinates used in the free-stereo mosaic images are difficult to transform into 3D absolute coordinates by using linear transformation. Therefore, methodology for transforming nonlinear 3D model coordinate into 3D absolute coordinate is needed. Also methodology for resampling the free-stereo mosaic image to the geo-stereo mosaic image is needed for overlapping digital map on absolute coordinate and stereo mosaic images. In this paper, we propose a 3D non-linear transformation for converting 3D model coordinate in the free-stereo mosaic image to 3D absolute coordinate, and a 2D non-linear transformation based on 3D non-linear transformation converting the free-stereo mosaic image to the geo-stereo mosaic image.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.27-34
• /
• 2004

This paper proposes a method to trace and interpret a moving object based on the information which can be directly obtained from MPEG-2 compressed video stream without decoding process. In the proposed method, the motion flow is constructed from the motion vectors included in compressed video. We calculate the amount of pan, tilt, and zoom associated with camera operations using generalized Hough transform. The local object motion can be extracted from the motion flow after the compensation with the parameters related to the global camera motion. Initially, a moving object to be traced is designated by user via bounding box. After then automatic tracking Is performed based on the accumulated motion flows according to the area contributions. Also, in order to reduce the cumulative tracking error, the object area is reshaped in the first I-frame of a GOP by matching the DCT coefficients. The proposed method can improve the computation speed because the information can be directly obtained from the MPEG-2 compressed video, but the object boundary is limited by macro-blocks rather than pixels. Also, the proposed method is proper for approximate object tracking rather than accurate tracing of an object because of limited information available in the compressed video data.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.1-15
• /
• 2007

The objective of this paper is the establishment of finite element analysis frame work for pavement research. Finite element analysis results simulating various loading experiments are verified with sensor measurements obtained from the KHC Test Road. The accuracy of the finite element analysis can be supported by these efforts so that it helps spread out the finite element analysis to pavement research and design processes. The finite element model used in this research is the full 3D nonlinear model including concrete slab, lean concrete base, subbase, shoulder, dowel, and tie-bar. In order to accomplish the accurate verification, the loading condition and the pavement temperature distribution are exactly simulated with field measured data. The curling behavior and the strain distribution are compared with measured responses from the loading tests with a truck and the FWD. Strain and curling predictions from the concrete slab are matched well with measured responses but the strain prediction from the lean concrete base is not matched with measured response. In addition, the magnitude of permanent curling is evaluated with the finite element analysis.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.853-862
• /
• 2002

Face Detection can be defined as follows : Given a digitalized arbitrary or image sequence, the goal of face detection is to determine whether or not there is any human face in the image, and if present, return its location, direction, size, and so on. This technique is based on many applications such face recognition facial expression, head gesture and so on, and is one of important qualify factors. But face in an given image is considerably difficult because facial expression, pose, facial size, light conditions and so on change the overall appearance of faces, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact face detection which overcomes some restrictions by using neural network. The proposed system can be face detection irrelevant to facial expression, background and pose rapidily. For this. face detection is performed by neural network and detection response time is shortened by reducing search region and decreasing calculation time of neural network. Reduced search region is accomplished by using skin color segment and frame difference. And neural network calculation time is decreased by reducing input vector sire of neural network. Principle Component Analysis (PCA) can reduce the dimension of data. Also, pose estimates in extracted facial image and eye region is located. This result enables to us more informations about face. The experiment measured success rate and process time using the Squared Mahalanobis distance. Both of still images and sequence images was experimented and in case of skin color segment, the result shows different success rate whether or not camera setting. Pose estimation experiments was carried out under same conditions and existence or nonexistence glasses shows different result in eye region detection. The experiment results show satisfactory detection rate and process time for real time system.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.277-284
• /
• 2004

This paper presents a facial expression control method of 3D avatar that enables the user to select a sequence of facial frames from the facial expression space, whose level of details the user can select hierarchically. Our system creates the facial expression spare from about 2,400 captured facial frames. But because there are too many facial expressions to select from, the user faces difficulty in navigating the space. So, we visualize the space hierarchically. To partition the space into a hierarchy of subspaces, we use fuzzy clustering. In the beginning, the system creates about 11 clusters from the space of 2,400 facial expressions. The cluster centers are displayed on 2D screen and are used as candidate key frames for key frame animation. When the user zooms in (zoom is discrete), it means that the user wants to see mort details. So, the system creates more clusters for the new level of zoom-in. Every time the level of zoom-in increases, the system doubles the number of clusters. The user selects new key frames along the navigation path of the previous level. At the maximum zoom-in, the user completes facial expression control specification. At the maximum, the user can go back to previous level by zooming out, and update the navigation path. We let users use the system to control facial expression of 3D avatar, and evaluate the system based on the results.

• The Journal of Korean Medicine
• /
• v.32 no.6
• /
• pp.10-17
• /
• 2011

Background: Vibration response imaging (VRI) is a new technology that records energy generated by airflow during the respiration cycle. Analysis of lung sound using VRI may overcome the limitations of auscultation. Objectives: To set a VRI standard for healthy Koreans, we conducted a clinical assessment to evaluate breath sound images and quantification in healthy subjects and compared the findings with reported breath sound characteristics. Methods: Recordings were performed using the VRIxp. Eighty subjects took a deep breath four times during a 12-second interval while sitting upright. The quantitative aspect was analyzed using the VRI quantitative lung data (QLD) for total left lung, total right lung and for six lung regions: left upper lung (LUL), left middle lung (LML), left lower lung (LLL), right upper lung (RUL), right middle lung (RML), right lower lung (RLL). The qualitative aspect was provided through image assessments by three reviewers. Results: In all regions the left lung had significantly higher QLD than the right lung (P<0.005, paired t-test). The inter-rater agreement was 0.78. 84% of the images were found normal by the final assessment. Among the 16% (n=13) of images with abnormal final assessment, the most common flawed features were dynamic image (77%, n=10) and maximum energy frame (MEF) shape (77%, n=10). No significant differences were found between males and females for QLD but there were significant differences in qualitative aspects including dynamic images, MEF shape, and missing LLL. Conclusion: The characteristics of healthy Koreans are similar to those of Western subjects reported previously. VRI is easy to use and objective, and so is helpful to diagnose patients with respiratory diseases and to monitor the progress of diseases after medical treatments.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.128-136
• /
• 2007

Since the multi-view video is a set of video sequences captured by multiple array cameras for the same three-dimensional scene, it can provide multiple viewpoint images using geometrical manipulation and intermediate view generation. Although multi-view video allows us to experience more realistic feeling with a wide range of images, the amount of data to be processed increases in proportion to the number of cameras. Therefore, we need to develop efficient coding methods. One of the possible approaches to multi-view video coding is to generate an intermediate image using view interpolation method and to use the interpolated image as an additional reference frame. The previous view interpolation method for multi-view video coding employs fixed size block matching over the pre-determined disparity search range. However, if the disparity search range is not proper, disparity error may occur. In this paper, we propose an efficient view interpolation method using initial disparity estimation, variable block-based estimation, and pixel-level estimation using adjusted search ranges. In addition, we propose a multi-view video coding method based on H.264/AVC to exploit the intermediate image. Intermediate images have been improved about $1{\sim}4dB$ using the proposed method compared to the previous view interpolation method, and the coding efficiency have been improved about 0.5 dB compared to the reference model.