• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.562-566
• /
• 2004

In this paper, we propose a method for constructing terrestrial/cable PSIP converting system, so-called a PSIP converter, which is converting terrestrial PSIP into cable PSIP for a data broadcasting service in the interoperable network of terrestrial and cable, and define an interface between the PSIP converter and the OOB SI generator by using PMCP messages compliant to ATSC T3/S1. The exiting PSIP converter just converts terrestrial PSIP into cable PSIP compliant to ATSC and OCAP standard and transmits by a MPEG-2 TS format. That is to say, it is not for the digital data broadcasting but for the digital broadcasting. Say in other word, the proposed PSIP converter is designed to convert and transmit PSIP including DET information which is necessary data event information for data broadcasting service. In addition, the PSIP converter can support various types of PSIP information to the OOB SI generator by using PMCP messages defined by a hierarchical structure as per each channel, audio/video event, data event and so on.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.197-212
• /
• 1997

The performance of a torque converter can be expressed by the performance parameters such as flow radius and flow angle, on the mean flow path. The geometric analysis of the torque converter is required to determine these parameters for the modeling of the torque converter. In general, the blade shape is depicted by three dimensional data at the mid-surface of blade or those of the pressure and suction side. To generate three dimensional model of the blade using the data mentioned above, a consistent data format and a shape generation algorithm are required. This paper presents a useful consistent data format of the blades and an algorithm for the geometrical shape generation. By the geometric analysis program to which the shape generation algorithm is embedded, the variation of blade angles in rotating element analyzed. Then finally, the analyzed results of geometric profile of a blade are compared with those of the blade design principle, so called forced vortex theorem.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.4
• /
• pp.275-279
• /
• 2011

In this paper, an observer-based sampled-data controller of linear system is proposed for the wave energy converter. Based on the sampled-data observer, the controller is design. In the closed-loop system with controller, it obtains the norm inequality between the continuous-time state variable and the discrete-time one. Using the norm inequality, sufficient condition is derived for the asymptotic stability of the closed-loop system and formulated in terms of linear matrix inequality. Finally, the wave energy converter simulation is provided to verify the effectiveness of the proposed technique.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.328-334
• /
• 2016

This paper examines the reliability of a VSC-HVDC valve based on a modular multilevel converter (MMC) HVDC system. The main objective of this paper is to determine the redundancy of the MMC valve. Several prediction methods are introduced, but the binomial failure method is selected to be used. To determine the availability and reliability prediction of MMC valve, which comprises a DC/DC converter, a gate driver, a capacitor, and an IGBT, the failure data of the MMC module are used as the tracking data according to the experimental result. This method uses a simplified equation to find the valve redundancy by transforming the binomial function to De Moivre's formula. This method is the first to be used to find the valve margin.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.828-837
• /
• 1991

본 논문에서는 CCITT에서 채택된 X.2.5 network과 IBM이 채택한 System network architecture(SNA)의 synchronous data link control(SDLC)간의 protocol converter의 성능 분석을 한다. 여기서 protocol converter의 link level map-ping method를 사용하여 구현 되었다고 가정한다. 성능 분석을 통하여 각종 parameter에 대한 throughput과 mean waiting time을 구하며, 다양한 paramerter에 대하여 최적의 값을 조사한다. 특히 converter가 추정한 SDLC frame이 X.25. network packetizing과 규정한 최대 data packet size 보다 더 클 경우에 frame을 분할하게 되는데. 분할방식에 있어서 full and remainder packetzing과 equal packetizing 도입하여 서로간의 성능을 비교한다. message를 분할 할 때 조격으로 나누는 것이 frame의 오류를 줄일 수 있기 때문에 전자보다 후자가 성능면에서 우수함을 알 수 있다.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.190-200
• /
• 2019

The flyback converter, which can be regarded as a nonlinear time-varying system, has complex dynamics and nonlinear behaviors. These phenomena can affect the stability of the converter. To simplify the modeling process and retain the information of the output capacitor branch, a special sampled-data model of a peak current-mode (PCM) controlled flyback converter is established in this paper. Based on this, its dynamic behaviors are analyzed, which provides guidance for designing the circuit parameters of the converter. With the critical stability boundary equation derived by a Jacobian matrix, the stable operation range with a varied output capacitor, proportional coefficient of error the amplifier, input voltage, reference voltage and slope of the compensation ramp of a PCM controlled flyback converter are investigated in detail. Research results show that the duty ratio should be less than 0.5 for a PCM controlled flyback converter without ramp compensation to operate in a stable state. The stability regions in the parameter space between the output capacitor and the proportional coefficient of the error amplifier are enlarged by increasing the input voltage or by decreasing the reference voltage. Furthermore, the ramp compensation also can extend to the stable region. Finally, time-domain simulations and experimental results are presented to verify the theoretical analysis results.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.13-18
• /
• 2010

This work proposes and characterizes switched-capacitor type cyclic digital-to-analog converter for display data driving. The proposed digital-to-analog converter composes simple structure, and can be implemented for low-power, small area display driver ICs. By circuit level simulations, it is verified that the op-amp input referred offset is attenuated at the DAC output and the circuit performance is robust at 0.5% of capacitor mismatch.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1206-1208
• /
• 1993

This paper is to study and realize a measuring device for complex dielectric constants. The device is consisted in order of interface unit, external RAM, programmable counter, D/A converter, measuring circuit, Sample & Hold circuit, A/D converter and related control circuits. Various excitation waves are digitalized and sent to the 4096 static RAM by personal computer. These data saved in the RAM are converted to analog excitation waves through D/A converter. The frequency of excitation wave is depend on the read-out speed of the RAM according to clock pulses. Such generated waves are applied to dielectrics under test and their responses are sampled and converted to digital data through A/D converter. The computer takes the digital data and calculates finally the complex dielectric constants. The frequencies for Measurement ranges from 0.04 Hz to 10 kHz.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.375-383
• /
• 2011

This paper describes a real-time hardware simulator for a grid-tied Permanent Magnet Synchronous Generator (PMSG) wind power system, which consists of an anemometer, a data logger, a motor-generator set with vector drive, and a back-to-back power converter with a digital signal processor (DSP) controller. The anemometer measures real wind speed, and the data is sent to the data logger to calculate the turbine torque. The calculated torque is sent to the vector drive for the induction motor after it is scaled down to the rated simulator power. The motor generates the mechanical power for the PMSG, and the generated electrical power is connected to the grid through a back-to-back converter. The generator-side converter in a back-to-back converter operates in current control mode to track the maximum power point at the given wind speed. The grid-side converter operates to control the direct current link voltage and to correct the power factor. The developed simulator can be used to analyze various mechanical and electrical characteristics of a grid-tied PMSG wind power system. It can also be utilized to educate students or engineers on the operation of grid-tied PMSG wind power system.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.135-143
• /
• 2003

This paper describes the design techniques of the data converters for Multiple-Valued Logic(MVL). A 3.3V low power 4 digit CMOS analog to quaternary converter (AQC) and quaternary to analog converter (QAC) mainly designed with the neuron MOS down literal circuit block has been introduced. The neuron MOS down literal architecture allows the designed AQC and QAC to accept analog and 4 level voltage inputs, and enables the proposed circuits to have the multi-threshold properity. Low power consumption of the AQC and QAC are achieved by utilizing the proposed architecture.