• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2139-2144
• /
• 2017

In case of communication method and protocol applied to the industrial field, various kinds and methods are applied to the field according to the environment and hardware configuration specifications. In order to develop and construct an industrial monitoring system, the development of the equipment is carried out through hardware system analysis and communication protocol analysis each time, so that a lot of development costs and time are being entered. In this paper, we proposed a programmable protocol conversion algorithm to support the integrated monitoring of industrial equipment using various protocols. This method can extract the necessary data from the data transmitted by serial communication, NMEA, CAN, Modbus communication method and transmit it to Ethernet. We implemented a communication gateway module that supports various communication methods, and experimented with data conversion and transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2443-2450
• /
• 2014

In the motion recognition system using depth image, the depth image is converted to the real world formed 3D point cloud data for efficient algorithm apply. And then, output depth image is converted by the projective world after algorithm apply. However, when coordinate conversion, rounding error and data loss by applied algorithm are occurred. In this paper, when convert 3D point cloud data to depth image, we proposed efficient conversion method and its hardware implementation without rounding error and data loss according image size change. The proposed system make progress using the OpenCV and the window program, and we test a system using the Kinect in real time. In addition, designed using Verilog-HDL and verified through the Zynq-7000 FPGA Board of Xilinx.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.215-224
• /
• 2001

In order to comply with revised national regulationson radiological protection and to implement recent nuclear data and dose conversion factors, KOPEC developed a new point kernel gamma and beta ray shielding analysis computer program. This new code, named VisualShield, adopted mass attenuation coefficient and buildup factors from recent ANSI/ANS standards and flux-to-dose conversion factors from the International Commission on Radiological Protection (ICRP) Publication 74 for estimation of effective/equivalent dose recommended in ICRP 60. VisualShieid utilizes graphical user interfaces and 3-D visualization of the geometric configuration for preparing input data sets and analyzing results, which leads users to error free processing with visual effects. Code validation and data analysis were performed by comparing the results of various calculations to the data outputs of previous programs such as MCNP 4B, ISOSHLD-II, QAD-CGGP, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.853-856
• /
• 2002

Present. direct method x-ray conversion detector is studied by abroad medical instrument and country with amorphous Selenium. And we search the method for large area x-ray detector. Amorphous-Selenium based photoreceptor is widely used on the X-ray conversion materials. But amorphous-selenium based x-ray conversion detector is broken by high voltage and leakage defect point. In this paper, We investigated top-electrode distance rate to improve defect point and high voltage broken. The result to appoint to made large area x-ray conversion detector with base data.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.133-139
• /
• 2002

In precision instrumentation system, an A/D conversion of signal conditioning has been always suffered from some problems ; offset and drift voltage with environmental situation. This paper suggests a method of reducing the offset voltage and the drift error from the A/D conversion hardware using analog signal switching technique with specific operational amplifier circuits. Also, we have designed a hardware active filter and a software digital filter with Auto Zero Tracking algorithm for better dignal process of the our proposed weighing system. Software technique was performed to obtain the stable data from A/D converter. As a result of our experimental works, the proposed system is expected to be used in the industrial field where a high precision measurement is required.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.226-231
• /
• 2003

A coupling system of MM5 and POM using Stampi with different kinds of parallel computer is proposed and comparative numerical simulations of mesoscale wind induced by topography around East Sea/Sea of Japan are carried out. The results are as follows： 1) Strong horizontal conversion is induced by high mountain Pekdoo at its leeside. 2) The conversion winds at lee of high mountain are not clear in monthly and yearly mean NCEP-reanalysis because of coarse resolution of 1.86 degree by 1.86 degree. But Wind conversion is well simulated at atmosphere and ocean coupling system. And the conversion area of lee side of mountain is also agreed well with observed data of NSCAT launched in satellite ADEOS. 3) The surface ocean current is well correspondent with wind direction, induced by high mountains. And small different wind field information lead the different of particle distribution in numerical experiments of particle distribution on ocean surface.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.71-76
• /
• 1999

In digital cellular communication systems, tandem coding occurs in communications between mobile phones with different speech codecs, resulting in poor voice quality, high computational load, and long transmission delay. In this paper, voice packet conversion technique is proposed to solve the tandem coding problems, and packet conversion algorithm from 13kbps QCELP to 8kbps QCELP is developed. Simulations using various speech data show that the proposed packet conversion method produces voice quality which is equivalent to that by the conventional tandem coding method with shorter transmission delay using about 33% computational load.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.236-237
• /
• 2017

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper implemented a protocol conversion algorithm for industrial monitoring about communication Data. This algorithm is supported programmable method by user. we experimented the protocol conversion by communication gateway module using implemented algorithm, and obtained good results.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.332-337
• /
• 2008

A reaction and evaporation types of cerium based conversion coatings were developed for galvanized steel sheet. The corrosion loss Q(Cb/cm2) and protection efficiency P(%) were obtained using a polarization technique for cerium based conversion coatings on galvanized steel exposed to 0.5N NaCl for 7 days. The microstructure of coating layer was observed using SEM. An excellent corrosion reistnce of galvanized steel was obtained by two types of cerium basd conversion coating. Salt spray test was done to evaluate the corrosion resistance of three samples by visual inspection. The corrosion ranking of three samples-untreated and two treatedby electrochemical data was matched well with the results of salt spray test.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.4
• /
• pp.188-194
• /
• 2005

There are many factors that affect on the system output of Photovoltaic(PV) power generation; the variation of solar radiation, temperature, energy conversion efficiency of solar cell etc. This paper suggests a methodology for calculation of PV generation output using the probability distribution function of irradiance, PV array efficiency and revision factors of solar cell conversion efficiency. Long-term irradiance data recorded every hour of the day for 11 years were used. For goodness-fit test, several distribution (unctions are tested by Kolmogorov-Smirnov(K-S) method. The calculated generation output with or without revision factors of conversion efficiency is compared with that of CMS (Centered Monitoring System), which can monitor PV generation output of each PV generation site.