• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.821-829
• /
• 2014

This paper describes the development of a wireless communication controller of gripper contact signal for industrial robot. The wireless communication gripper controller is composed of a robot wireless communication controller and a gripper wireless transmitting/receiving controller. The robot wireless communication controller transmits the data of gripper sensors, and the gripper wireless communication controller receives the data. And the controller sends the data to the robot controller of industrial robot. As a result of the characteristics test of the wireless communication gripper controller, it is thought that the robot wireless communication controller A transmits and receives three gripper wireless transmitting/receiving controller A1, A2, A3 another. Thus, the developed wireless communication gripper controller can be used for transmitting/ receiving the data of gripper sensors for industrial robot.

• Journal of Information Technology Applications and Management
• /
• 제16권4호
• /
• pp.263-283
• /
• 2009

Although some CASE tools supported conceptual data design, they required for users too much preliminary knowledge to learn how to use and handle them. In addition, in a number of studies on conceptual data design with natural language, they claimed passive participation for users with conforming to messages predefined by CASE tools. As an alternative to these traditional CASE tools, we proposed an ERD formulator for automated data design tool, called ERDF, so that even ordinary users, not necessarily data modeler, are capable of formulating ERD on business requirements by use of ERDF. We, first of all, introduced NSM as the standard methodology. We also designed the structure of ERDF including main controller, input controller, operation controller, regulation controller, schema controller, and output controller. We then defined conceptual domains and basic operations to lay down schema operations as well as sentence rules to handle input sentence in natural language. To get an ERD that is faithful to business requirements, we laid out supplementary design for dialogue and confirmation of soundness and completion.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1903-1910
• /
• 2012

This paper presents a data based low-order controller design algorithm for a linear time-invariant process with a time delay. The algorithm is composed by combining an identification step based on open loop pulse test with a low-order controller design step to obtain the entire set of controllers achieving multiple performance specifications. The initial information necessary for this algorithm are merely the width and amplitude of a rectangular pulse, a controller of four types (PI, PD, PID, first-order), and design objectives. Various parametric approaches that have been developed are merged in the controller design algorithm. The resulting controller set satisfying the design objectives are displayed on the 2D and 3D graphics and thus it is very easy for us to pick a controller inside the admissible set because we can check the corresponding closed-loop performances visually.

• 정보처리학회논문지D
• /
• 제16D권6호
• /
• pp.881-888
• /
• 2009

본 연구에서는 소프트웨어 기반으로 물품관리를 하기 위한 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 제안한다. 물품을 인력이 아닌 소프트웨어로 관리하기 위하여 여러 아키텍처들이 존재한다. MVC와 기존 아키텍처의 경우, 공통된 객체의 전달로 불필요한 데이터가 이동되는 문제점이 발생한다. 따라서 이와 같은 문제점을 해결하기 위하여 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 제시하고자 한다. VMDC(View, Model, Dispatcher, Controller) 아키텍처의 Dispatcher(사령부)는 각 Controller(컨트롤러)가 필요로 하는 데이터를 파악하고 그것을 기반으로 하여 객체를 재구성함으로서 효율적인 데이터 이동을 하도록 한다. 또한 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 이용하여 개발된 식품관리 프로그램으로 사용사례를 보이고, 효율성을 제시 후 향후 연구방향 또한 제시한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권12호
• /
• pp.4725-4747
• /
• 2020

Software defined networking (SDN) is considered to be one of the most promising paradigms in the future. To solve the scalability and performance problem that a single and centralized controller suffers from, the distributed multi-controller architecture is adopted, thus forms multi-domain SDN. In a multi-domain SDN network, it is of great importance to ensure a reliable control plane. In this paper, we focus on the reliability problem of multi-domain SDN against controller failure from perspectives of backup controller deployment and controller replication. We firstly propose a placement algorithm for backup controllers, which considers both the reliability and the cost factors. Then a controller replication mechanism based on shared data storage is proposed to solve the inconsistency between the active and standby controllers. We also propose a shared data storage layout method that considers both reliability and performance. Besides, a fault recovery and repair process is designed based on the controller backup and shared data storage mechanism. Simulations show that our approach can recover and repair controller failure. Evaluation results also show that the proposed backup controller placement approach is more effective than other methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.270-275
• /
• 1993

In this paper, the arc welding robot controller using a touch sensor and a arc sensor is presented. The controller is composed of robot controller parts for moving torch, and arc welding controller for welding and tracking. In the controller, an compensated data is generated to control robot trajectory and seam tracking by the arc sensor function. The data is obtained by integration of arc current. Experimental results are presented confirming the controller performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.230-235
• /
• 1992

We propose a method of generating data to train a neural network controller. The data can be prepared directly by an iterative learning technique which repeatedly adjusts the control input to improve the tracking quality of the desired trajectory. Instead of storing control input data in memory as in iterative learning control, the neural network stores the mapping between the control input and the desired output. We apply this concept to the trajectory control of a two link robot manipulator with a feedforward neural network controller and a feedback linear controller. Simulation results show good generalization of the neural network controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 춘계학술대회 학술발표 논문집
• /
• pp.43-46
• /
• 2001

We, in this paper, design the Sugeno-models fuzzy controller by using the membership function modification algorithm and ANFIS, which are clustering and learning the input-output data. The membership function modification algorithm constructs the more concrete fuzzy controller by clustering the input-output data from the fuzzy inference system. ANFIS construct the Sugeno-models fuzzy controller by learning the input-output data from the above controller. We showed that the fuzzy controller designed by our method could have the stable learning and the enhanced performance.

• 산업기술연구
• /
• 제21권A호
• /
• pp.97-103
• /
• 2001

This paper presents the development of the I/O Interface for the real time parallel data communication between controller of a six-axis industrial robot(CRS-A460) and an external computer. The proposed I/O Interface consists of the hardware I/O interface and the software that is downloaded to the robot controller and executed by the controller operating system. The constitution of the digital I/O Port for CRS-A460 robot controller and the digital I/O board for IBM-PC are presented as well as the Process Control Program of the robot controller. The developed protocol for the parallel data communication is described. The data communication is tested, and the performance is analysed. In particular, it is shown that the real-time constraint of the robot controller process is satisfied.