• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.415-419
• /
• 2018

This paper predicts and measures the C/N ratio of a beacon signal transmitted from geostationary orbit satellite KorSat 5A ($113^{\circ}E$) at a ground station located in Kimpo. Based on the ground stations, we compared the rain attenuation of the zone K of ITU-R and the rain attenuation which analyzed the domestic weather information. In ITU-R, the Korean rainfall characteristics are classified into zone K, but forecasting the rainfall intensity and attenuation of three adjacent cities based on the cumulative rainfall data per minute from 2013 to 2017. The calculation of rainfall path and attenuation is based on ITU-R recommendations. The change of the C/N according to the rainfall amount was confirmed through the 2 week satellite beacon signal C/N measurement. The predicted critical C/N was decreased to 12 dB at $A_{0.3}$. During the experiment, it was confirmed that it decreased up to 8 dB according to the concentrated rainfall.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.436-444
• /
• 2018

The purpose of this research is to assess the efficiency of the airline's route. The revenue source of low cost airline carriers is not various unlike regular airline carriers, because they are operating only domestic and international flights for a country of close proximity. In particular, domestic low-cost airlines in Korea can't provide cargo transport services but rely on passengers and additional services to generate profits. Therefore, it is absolutely important to maintain a low cost and effective passenger transport line. This study will suggest the way to improve efficiency of route operated by low-cost airlines. Analysis method is DEA. The input parameters and output results were selected by existing research. Based on the results of this study, it will be able to assist establishing routes and selling strategies of the low-cost airlines.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.207.1-207.1
• /
• 2014

High-mobility and two dimensional conduction at the interface between two band insulators, LaAlO3 (LAO) and SrTiO3 (STO), have attracted considerable research interest for both applications and fundamental understanding. Several groups have reported the photoconductivity of LAO/STO, which give us lots of potential development of optoelectronic applications using the oxide interface. Recently, a giant photo response of Pd nano particles/LAO/STO is observed in UV illumination compared with LAO/STO sample. These phenomena have been suggested that the correlation between the interface and the surface states significantly affect local charge modification and resulting electrical transport. Water and gas adsorption/desorption can alter the band alignment and surface workfunction. Therefore, characterizing and manipulating the electric charges in these materials (electrons and ions) are crucial for investigating the physics of metal oxide. Proposed mechanism do not well explain the experimental data in various ambient and there has been no quantitative work to confirm these mechanism. Here, we have investigated UV photo response in various ambient by performing transport and Kelvin probe force microscopy measurements simultaneously. We found that Pd nano particles on LAO can form Schottky contact, it cause interface carrier density and characteristics of persistence photo conductance depending on gas environment. Our studies will help to improve our understanding on the intriguing physical properties providing an important role in many enhanced light sensing and gas sensing applications as a catalytic material in different kinds of metal oxide systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.991-997
• /
• 2004

In this paper, we propose the architecture of modem receiver to fabricate HomePNA 2.0 chip. HomePNA suffers from inferior channel because of bridge tap, the effect of amateur HAM band and so on. To transfer data over such channel, HomePNA 2.0 uses training sequence to equalize channel and uses FD-QAM optionally as modulation method. So modem receiver demodulate QAM based signal and needs optimum architecture that fully uses these transmission feature. As a result of research, we define 2 mode function of modem receiver depending on TX/RX state. In this paper, particularly, we show the algorithm of equalizer, carrier phase recovery and frame synchromzationblock and propose architecture that improve the performance of channel equalization and is stable in operation. In the end, we estimate the performance of proposed HomePNA2.0 modem receiver over HomePNA TEST LOOP using SPW program.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.157-164
• /
• 1997

This study deals with GPS-photogrammetry practicability by C/A-code reception. It allows data to be acquired and analyzed fast. Combined block adjustment method was applied at the topographical map production of coast-land. And we compared it that of conventional block adjustment. As a result, it was found that accuracy was very sensitive to the arrangement and number of control points. The accuracy in the horizontal and vertical was $\pm{2cm}$ if all of the control points was available. however accuracy was not affected at additional parameters for systematic errors' elimination and it leads to bad results when the number of control points was few and arrangement of control points was not stabilized. GPS observations were added in block adjustment, but the accuracy of block was not upgraded due to the low accuracy of C/A-code reception. So relative positioning method with carrier phases was required for high accuracy and it is expected that CPS photogrammetry with C/A-code will be used widely according to the improvement of observation methods and the development of receiver.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.197-202
• /
• 2001

The characteristics of the electrochemically Li intercalated synthetic graphite were determined from the studies with XRD method, DSC and solid $^7Li-NMR$ spectrophotometric analysis. From the results of X-ray diffraction method, it was found that the compounds in the stage 1 structure were predominantly formed. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From these results, it was found that exothermic and endothermic reactions of lithium intercalated into synthetic graphite are related to thermal stability of lithium ion between carbon graphene layers. From the $^7Li-NMR$ data, scientific observation found that bands are shift toward higher frequencies with increasing lithium concentration because non-occupied electron shells of Li increased in charge carrier density. Line widths of the Li intercalated synthetic graphite compounds decreased slowly because of non-homogeneous local magnetic order and the random electron spin direction for substituted Li.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.538-547
• /
• 2004

Optical Burst Switched (OBS) networks usually employ one-way reservation by sending a burst control packet (BCP) with a specific offset time, before transmitting each data burst frame (BDF). Therefore, The quality of service may be degraded because contentions may lead to loss of BDFs. Especially, this phenomenon becomes more serious when burst size is longer. This necessitates an effective method of prevention to avoid burst collision in nodes. OBS networks can employ several methods to avoid such burst losses. One is that burst size is cut short to reduce burst loss probability during scheduling time. In this paper, we evaluate the burst generation and transmission using Sub-Carrier Multiplexting (SCM) in OBS networks. We propose an appropriate burst assembly architecture and transmission scheme based on SCM in OBS networks. The performance of SCM in OBS networks is examined in terms of number of Sub-Carriers per wavelength, burst loss probability, throughput, and total bandwidth of an optical fiber.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.402-411
• /
• 2006

In OFDMA system, multiple users transmit signal through the subcarriers assigned to the user. Capabilities of high data-rate transmission in OFDMA system come from the ability to compensate the ICI (Inter Carrier Interference) using a single-tap equalizer and to implement transmitter and receiver by employing high speed FFT circuitry. Issues of time and frequency synchronization in OFDM system is quite essential to preserve the orthogonality among subcarriers not to produce ICI. In this paper, we Int analyze the preamble used in 802.16 d/e and WiBro system. Then we propose an effective timing synchronization algorithm, which is more accurate than the conventional one in the sense of timing position, and integral frequency offset estimation scheme for the simultaneouse estimation of the fractional and integral frequency offset. Through the simulation utilizing the proposed synchronization algorithm and structure, we show that the performance degradation due to the adjacent channel interference can be mitigated for the than conventional ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1563-1570
• /
• 1999

This paper relates to the soft decision method with erasure technique in digital terrestrial television broadcasting system. The proposed decoder use the CSI derived from using the pilots in receiver. The active real(I) and imaginary(Q) data are transferred to the branch metric calculation block that decides the Euclidean distance for the soft decision decoding and also the estimated CSI values are transferred to the same block. After calculating the Euclidean distance for the soft decision decoding, the Euclidean distance of branch metric is multiplied by CSI. To do so, new branch metric values that consider each carrier state information are obtained. We simulated this method in better performance of about 0.15dB to 0.17dB and 2.2dB to 2.9dB in Rayleigh channel than that of the conventional soft decision Viterbi decoding with or without bit interleaver where the constellation is QPSK, 16-QAM and 64-QAM.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.333-337
• /
• 2004

This paper describe a design of 5GHz OFDM baseband chip for IEEE 802.11a wireless LAN. The proposed device is consists of transmitter and receiver within a single FPGA chip. We applied single tap equalizer that use Normalized LMS algorithm to remove ISI that happen at high speed data transmission. And also, we used carrier wave frequency offset algorithm that use training symbol to remove ICI. The simulation results show the correct transmission without errors the between transmitter and receiver And we can remarkably reduce the number of register through the synthesized circuits by using DSP block and EMB(Embedded Memory Block). The target device for implementation of the synthesized circuits is Altera Stratix EPIS25FC672 FPGA and design platform is VHDL.