• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.164-169
• /
• 2015

Recent research has focused on alternative fuel to improve engine performance and to comply with emission regulation. Finding an alternative fuel and reducing environment pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched CNG fuel in SI engine and is to clarify the effects of hydrogen enrichment in CNG fuelled engine on exhaust emission and performance. An experimental study was carried out to obtain fundamental data for performance and emission characteristics of hydrogen enrichment in SI engine. The experiment was conducted at 2500 rpm, bmep 2 bar, 4 bar conditions while CNG fuel was mixed with 10, 20 and 30% hydrogen blends. From the experimental results, combustion duration was shortened due to rapid flame propagation velocity of hydrogen and these were attributed to the burning velocity increasing exponentially with increasing hydrogen blending ratio. Hydrogen has much wider flammable limit than methane, gasoline and the minimum ignition energy is about an order of magnitude lower than for other combustion. By adding hydrogen, $CO_2$ and HC were reduced. However, $NO_X$ was increased dut to high rate of heat release for hydrogen substitutions.

• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.92-98
• /
• 2016

본 논문은 Charge-Coupled Device (CCD) 카메라를 이용한 열화상의 실시간 추정과 화재경보에 대하여 논한 것으로 각도 및 위치에 따른 특징점 분석과 동일 형상의 벡터 성분 좌표점 설정에 따른 이미지 융합이 잘 되었다. 영상을 Display하는 픽셀의 데이터 값은 0~255, 센서 출력값은 0~5,000로 하여 정확성이 높았다. 시험결과 시험체로부터 500 m, 1000 m, 1500 m 거리에서 화염에 의한 시험체의 작동시간은 각각 7초, 26초, 62초 소요 되었고 화면이미지 생성이 효과적으로 이루어졌다. 화재 발생 진단은 주의/경보/화재의 3단계로 프로그램하여 Alarm의 순차적 동작과 SNS 전송이 이루어졌다. 비화재보시험을 위해 백열등, 형광등에 대해 시험하였으나 모두 비화재보를 발생하지 않았다. 시간대별 화염의 변화영상과 진행방향 및 확산속도의 분석은 화재진행상황 예측이나 열화상 실시간 추정과 경보로 비화재보 감소가 가능함을 확인하였다.

• 한국환경보건학회지
• /
• 제32권6호
• /
• pp.539-542
• /
• 2006

The objective of this paper is to compare the applicability of assimilable organic carbon (AOC) or biodegradable dissolved organic carbon (BDOC) for quantifying biodegradable organic material (BOM) and bio-stability in distribution systems for a variety of finished waters. The study the data is derived from was part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different waters on distribution system water quality. Seven different finished waters were produced from surface, ground, or brackish water on site and fed 18 independent pilot distribution systems (PDSs), either as single finished water or as a blend of several finished waters. AOC and BDOC have often been used as indicators of bacterial regrowth potential in distribution systems. In this study, AOC was the more useful assay of the two for the BOM concentrations observed in the PDSs. BDOC did not distinguish BOM while AOC did at the low BOM levels from many of the advanced treatments (e.g. RO, $O^3/BAC$). AOC in contrast allowed much more meaningful calculations of the consumption or production of AOC as the blends passed through the PDSs even for very low BOM blends. In addition, meaningful trends corresponding to changes in heterophic plate count (HPC) were observed for AOC but not for BDOC. Moreover, AOC stability was associated with waters produced from advanced membrane treatment.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.129-136
• /
• 2010

본 연구는 이축 압출기를 사용하여 생분해성 고분자인 Poly-L-lactic acid(PLLA)와 충격보강제로 Poly (ethylene-co-glycidyl methacrylate)(EGMA)와 Engage를 각각 PLLA에 대해 100/0, 75/25, 50/50, 25/75, 0/100의 조성으로 블렌드를 제조하였고, 3개의 PLLA/EGMA 블렌드에는 탈크를 첨가하였다. 이를 DMA, FESEM, UTM, Izod 충격시험기를 사용하여 PLLA 블렌드의 모폴로지와 점탄성, 기계적 특성을 측정하였다. DMA와 충격시험기의 측정결과 EGMA와 Engage의 함량이 증가함에 따라 상온에서의 저장탄성률이 감소하였고, 충격강도는 증가하였다. 한편 탈크가 첨가되면 저장탄성률은 증가하고 충격강도는 감소하였다. FESEM 분석으로부터, 매트릭스에 도메인이 잘 분산되어 있음을 알 수 있었고, UTM을 통하여 EGMA와 Engage의 함량이 증가하면 굴곡탄성률과 인장강도가 감소되지만, 탈크를 첨가함으로써 이를 보완할 수 있었다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권1호
• /
• pp.7-18
• /
• 2014

비행 소프트웨어는 인공위성의 탑재 컴퓨터에서 사용되는 소프트웨어로, 실시간성과 고신뢰성이 요구된다. 이와 같은 요구사항으로 인해 비행 소프트웨어는 동작 환경에 대한 종속성을 갖게 된다. 이러한 문제는 새로운 시스템을 구축할 때마다 매번 다시 개발하여야 하는 상황을 초래한다. 따라서 비행 소프트웨어와 동작 환경 사이의 종속성을 제거할 필요가 있으며, 이는 비행 소프트웨어의 이식성 향상을 통해 달성할 수 있다. 본 논문에서는 이를 위해 IMA 아키텍처 기반의 플랫폼 아키텍처를 제안한다. 이 아키텍처는 이식성을 극대화하기 위해 두 가지의 IMA 아키텍처 실현 방안을 기반으로 구축된 혼합형 아키텍처이다. 또한 혼합형 아키텍처의 검증을 위해 혼합형 아키텍처 기반의 시스템을 구현하고 동작 결과를 분석한다. 본 논문에서 제안한 아키텍처를 통해서 비행 소프트웨어와 동직 환경 사이의 종속성을 제거할 수 있다. G망을 활용하여 끊김없는 서비스를 지원할 수 있는 방안을 제안하였으며, 테스트베드 구현을 통하여 제안 방안의 우수성을 검증하였다.

• 청정기술
• /
• 제2권2호
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• 대한약침학회지
• /
• 제19권3호
• /
• pp.246-252
• /
• 2016

Objectives: The purpose of this study was to obtain a natural antibiotic from Phenol-rich compounds; for the dressing and the treatment of chronic wounds. Methods: The Phenol-rich compound sweet gel was prepared by blending four natural herbal extracts, Acacia catechu (L.F.), Momia (Shilajit), Castanea sativa, and Ephedra sinica stapf, with combination of a sweet gel medium, including honey, maple saps, Phoenix dactylifera L. (date), pomegranate extract and Azadirachta indica gum as a stabilizer. The combinations were screened by using a well-diffusion assay with cloxacillin as a control. Pseudomonas spp. was tested with our novel antimicrobial compound. The zones of inhibition in agar culture were measured for each individual component and for the compound, and the results were compared with those of the control group which had been treated with cloxacillin. Data were expressed as means ${\pm}$ standard deviations. Quantitative analyses were performed using the paired t-test. Results: The antibiotic effect of the Phenol-rich compound sweet gel was statistically shown to be more significant than that of cloxacillin against Pseudomonas aeruginosa (P < 0.05). Conclusion: Our novel approach to fighting the antibiotic resistance of Pseudomonas proved to be successful. The Phenol-rich compound sweet gel was found to be suitable for use as an alternative medicine and bioactive dressing material, for the treatment of patients with various types of wounds, including burns, venous leg ulcers, ulcers of various etiologies, leg ulcers on the feet of diabetic, unhealed graft sampling sites, abscesses, boils, surgical wounds, necrotic process, post-operative and neonatal wound infection, and should be considered as an alternative to the usual methods of cure.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.203-211
• /
• 2012

네트워크 보안 인프라는 다양한 형태의 기기별 조합과 융합을 기반으로 지속적인 발전을 하고 있다. 방화벽, 가상 사설 통신망, 침입 방지 시스템, 침입 탐지 시스템, 기업 보안 관리, TSM(Telebiometrics System Mechanism)과 같은 단계별 방어정책인 분산제어 형태에서 현재는 보안기기와 솔루션들을 병합함으로써 집중화와 인공 지능화 하는 단계까지 발전했다. 따라서 본 논문에서는 보안 기기와 솔루션을 집중화 하는 네트워크 보안 인프라 디자인 형태를 플랫폼 형태로 제안하고 각각의 경우에 따른 플랫폼 디자인 표준화를 위한 기초자료인 네트워크 보안 인프라 플랫폼 디자인 선정 방법론을 제공함으로써 실무에서 손쉽게 적용하고 구현하는 과정을 통해 침해로 인한 장애제어 등의 문제점을 최소화한 디자인 구현과 구축에 대한 방법론을 제안하고자 한다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권2호
• /
• pp.145-150
• /
• 2013

색 오버레이는 광과민성 증후군의 증세를 완화시키는 보조도구로 사용되어 왔다. 최근에 컴퓨터에서 사용할 수 있는 몇 종의 가상 색 오버레이가 개발되었으나, 모바일 환경에서 사용할 수 있는 것은 발표된 바 없다. 본 논문에서는 안드로이드의 최상위 윈도우를 활용하여 가상 색 오버레이를 이동시키지 않고 겹쳐진 앱이나 화면을 제어할 수 있는 모바일용 가상 색 오버레이를 구현하였다. 분광측색계를 이용하여 필름 오버레이의 색도 정보와 투과율을 측정하여 가상 색 오버레이에 적용할 색상정보를 추정하는 방법을 제안하였고, Intuitive Overlays에서 표현하는 모든 색상을 구현하였다. 시험 결과 기존의 필름 오버레이를 사용한 것과 동일한 효과를 얻었다.

• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.318-335
• /
• 2003

Expert judgment is frequently employed in the search for the solution to various engineering and decision-making problems where relevant data is not sufficient or where there is little consensus as to the correct models to apply. When expert judgments are required to solve the underlying problem, our main concern is how to formally derive their technical expertise and their personal degree of familiarity about the related questions. Formal methods for gathering judgments from experts and assessing the effects of the judgments on the results of the analysis have been developed in a variety of ways. The most important interest of such methods is to establish the robustness of an expert's knowledge upon which the elicitation of judgments is made and an effective trace of the elicitation process as possible as one can. While the resultant expert judgments can remain to a large extent substantiated with formal elicitation methods, their applicability however is often limited due to restriction of available resources (e.g., time, budget, and number of qualified experts, etc) as well as a scope of the analysis. For this reason, many engineering and decision-making problems have not always performed with a formal/structured pattern, but rather relied on a pertinent transition of the formal process to the simplified approach. The purpose of this paper is (a) to address some insights into the balanced use of formally structured and simplified approaches for the explicit use of expert judgments under resource constraints and (b) to discuss related decision-theoretic issues.