• The Journal of Society for e-Business Studies
• /
• v.10 no.1
• /
• pp.41-60
• /
• 2005

IDEF(Integrated Definition) method, a standard methodology of CALS process modelling, was applied to the weapon system R&D process to provide information modelling by analysing about goal, input, output and constraints in the R&D process. The information to be managed in R&D institutes was identified by using SmartER which is the automation program of IDEF1/1X and obtained information modelling for TO-BE model. The work process of weapon system R&D consists of the concept study phase, the exploration development phase, the system development phase, the prototype manufacturing phase, and the report writing of R&D results phase. The information modelling of weapon system R&D is the R&D work process with information sharing by means of IWSDB Since IDEF is suitable for large scale system development like weapon system R&D, further studies on IDEF would be required to achieve the goal of defense CALS.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.159-165
• /
• 2015

In this paper, we designed and tested of the passive millimeter-wave imaging system in near range. The proposed passive millimeter-wave imaging system consists two parts. The first part is a 94 GHz band millimeter imaging sensor which is coupled to an antenna, two LNAs, and a diode detector. The second part is a control unit. The control unit is consists of the 2-axes Cartesian robot, the data acquisition (DAQ), and imaging program. The 2-axes Cartesian robot should be able to scan a 2-D image of the metalic tools, IC card and plastic objects, with a raster scanning method. The passive millimeter-wave image of $20{\times}20$ pixels is acquired within less than 60s, and is immediately displayed and stored for post processing.In order to improve the image quality, interpolation methods are applied.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.179-188
• /
• 2018

In developing avionics systems, safety analysis and evaluation specified in SAE ARP4761 (Methods and Guidelines for Civil Aviation System and Equipment Safety Assessment Process) are carried out to prevent air accidents. Safety analysis requires knowledge of the abnormal state of the system, not its normal state, and its interrelationships with other standards. Therefore, a tool that automatically outputs data which proves compliance with safety certification standards is required. In this study,In this study, Schematized the safety analysis procedure of the specification and studied the method of applying the safety analysis CAD tools to individual procedure. As an example study, ARP4761 analysis was performed on the wheel brake system (WBS) of the ARP4761 appendix.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.326-330
• /
• 1988

For the automation of Koji incubation process, microcomputer based Koji incubation system was built and applied to acquisition of the process variables, and to control of the Koji incubation process. The incubation variables included the relative humidity and Koji weight. And data measured were sent to the microcomputer by the interface device built with MC 6821 PIA. Incubation environment conditions -temperature and humidity- were controlled by the actuation of heater and mist sprayer with on/off signal generated by ASIC program. Aspergillus oryzae as a starter of the Koji and steamed barley as media were used and Koji was successfully manufactured both at $25^{\circ}C,\;70%$ RH and at $27^{\circ}C,\;80%$ RH. During the Koji preperation, the temperature was linearly increased and substrate was consumed stepwise showing 3 steps in the weight loss curve.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.2
• /
• pp.189-196
• /
• 2014

Objectives : The purpose of this study was to examine the awareness of dental hygienists in public health center towards multicultural family and educational needs to provide information on community oral health programs. Methods : The subjects were 74 recruited from 126 dental hygienists in 14 public dental clinics in Jeonbuk Province. A self-reported questionnaire was filled out by 64 dental hygienists in charge of dental health care. Data were anlatzed by the statistical package SPSS WIN 12.0. Results : The characteristics of the subjects had no impact on their positive multicultural awareness, and there existed differences by age, rank and period of services in the channel of information acquisition. They got 3.5 out of five in multicultural awareness showing a positive way. The types of medical services for multicultural family revealed that they provided oral health education, dental checkup services and simple treatment covered by health insurance. Health insurance accounted for 15.4 percent of dental services. The obstacles to dental services in multicultural family were communication problems, poor concern for oral health and cultural gaps. They got 3.86 out of five points in educational needs for multicultural family who need the dental education most. The multicultural family showed the higher score in every question. Conclusions : Public health center dental clinics should help dental hygienists to acquire information on multicultural family. Public health center should provide the easy access way of dental health checkup for the multicultural family.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.139-152
• /
• 1998

In the present study, the flow characteristics of developing laminar oscillatory flows in a square -sectional 180 deg. curved duct are investigated experimentally. The experimental study using air in a square-sectional 180 deg. curved duct is carried out to measure velocity distributions with a data acquisition and LDV (Laser Doppler Velocimetry) processing system. In this system, Rotating Machinery Resolver (RMR) and PHASE program are used to obtain the results of unsteady flows. The major flow characteristics of developing oscillatory flows are found by analyzing velocity curves, mean velocity profiles, time-averaged velocity distribution of secondary flow, wall shear stress distributions, and entrance lengths. In a lower dimensionless angular frequency, the axial velocity distribution of laminar oscillatory flow in a curved duct shows a convex shape in a central part and axial symmetry. The maximum value of wall shear stress in a lower dimensionless angular frequency is located in an outside wall, but according to increasing the dimensionless angular frequency, the maximum of wall shear stress is moved to inner wall. The entrance lengths of laminar oscillatory flows in a square-sectional 180 deg. curved duct is obtained to 90 deg. of bended angle of duct in this experimental conditions.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.111-122
• /
• 2012

Resistivity seismic dilatometer (RSDMT) system is introduced. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance the reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program was constructed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed with SPT, CPTu, bender element test and DC resistivity survey. Through one penetration of RSDMT, various soil parameters were obtained and the reliability and repeatability of developed RSDMT system could be checked.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2002

A Safety Monitoring System using a laser and 2-D arrayed photo sensors is developed. To monitor of the deformation and small rotation of structure the developed optical system using 2-D photo sensor array was used to detect the variation of optical orbit of laser which was induced by deformation of the structure. Also, an operating program to manage the system and an algorithm for the data acquisition and the database are introduced. In this study, we demonstrated the capabilities of this system by laboratory experiments before applying the system to the field.

• Journal of Information Science Theory and Practice
• /
• v.7 no.3
• /
• pp.52-64
• /
• 2019

This research was aimed at studying the situation, problems, and requirements for digital collection lifecycle management of Thai theses and dissertations. The mixed research method used was composed of: (1) Study of the problem and situation in which the qualitative method was applied. The research site covered 10 higher education institutions where the Thailand Digital Collection (TDC) project is operated. The informants were key administrative officers of the TDC project of each institution. In-depth and structured interviews were conducted on an individual basis to obtain the most accurate answers. (2) Study of requirements based on the quantitative research method to survey the requirements for the digital collection management system for Thai theses and dissertations from 84 purposively-selected TDC project officers and 527 end users selected by accidental sampling, totaling 611 samples. Research findings are as follow: (1) The study of the situation and problems of digital collection lifecycle management shows that Thai higher institutions systematically manage their digital collection. The management lifecycle is consistent with the Guidance documents for lifecycle management of ETDs, which included seven steps: program planning, creation, submission, and ingestion, access and retrieval of digital objects, archiving and preservation, evaluation and assessment, interoperation (creation of institutional collaboration), and development of link data. (2) The study of requirements for digital collection management of Thai theses and dissertations shows five system requirements: acquisition and gathering, digitization, metadata standards, management of rights, and storage and retrieval, all of which are at M (mandatory) and D (desirable) levels.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.305-313
• /
• 2019

This study was a quasi-experimental design with a non-equivalent pre-post test that verified the effect of formative feedback practice on practice satisfaction, learning motivation and academic self efficacy for nursing students. 37 were assigned to an intervention group and 41 to a control group. Formative feedback practice was applied to intervention group and peer review smartphone videos was applied to control group. Data were analyzed using the SPSS/WIN 22.0 program. There was no significant difference in learning motivation between the groups, but there were a significant difference in practice satisfaction(t=-2.79, p=.007) and academic self efficacy(t=2.30, p=.024) between the pre-post scores of the experimental group. This is meaningful in that it is more effective to provide formative feedback practice than to provide peer review smartphone videos. Therefore, it is necessary to consider formative feedback practice for the acquisition of core fundamental nursing skills of nursing students.