• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1830-1840
• /
• 2011

CDISC (Clinical Data Interchanging Standards Consortium) standards are to support the acquisition, exchange, submission and archival of clinical trial and research data. SDTM (Study Data Tabulation Model) for Case Report Forms (CRFs) was recommended for U.S. Food and Drug Administration (FDA) regulatory submissions since 2004. Although the SDTM Implementation Guide gives a standardized and predefined collection of submission metadata 'domains' containing extensive variable collections, transforming CRFs to SDTM files for FDA submission is still a very hard and time-consuming task. For addressing this issue, we developed metadata based SDTM mapping rules. Using these mapping rules, we also developed a semi-automatic tool, named CDISC Transformer, for transforming clinical trial data to CDISC standard compliant data. The performance of CDISC Transformer with or without MDR support was evaluated using CDISC blank CRF as the 'gold standard'. Both MDR and user inquiry-supported transformation substantially improved the accuracy of our transformation rules. CDISC Transformer will greatly reduce the workloads and enhance standardized data entry and integration for clinical trial and research in various healthcare domains.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.51-58
• /
• 1998

A numerical program has been developed to model 2-D resistivity responses for a pole-pole array configuration in cross-hole resistivity measurements. Apparent resistivity and secondary potential were computed using the program for a cylindrical inhomogeneity in an uniform host medium excited by a point source of current in a borehole. Surprisingly apparent resistivity in the receiver hole turns out to be lower than the one of surrounding medium regardless of the conductivity of cylindrical inhomogeneity. Using only cross-hole data, therefore, it is impossible to interpret the conductivity of inhomogeneity. To overcome this problem, 3-D measurement and interpretation are necessary. If 3-D data acquisition is impossible, inline data should be used to get the information about the conductivity of inhomogeneity.

• The Research Journal of the Costume Culture
• /
• v.8 no.5
• /
• pp.741-753
• /
• 2000

The purpose of this study : 1. The total 24 range measurements of active dynamic motion of 40 subjects(20's and 30's, and 40's∼60's) using previous studies. The results were compared with the other studies in the aspects of age. In this study, The 3-D motion analysis system consists of VICON 140, data acquisition system, and data analysis program called by KRISSMAS. VICON 140 is dynamic motion analyzer, and KRISSMAS is a program developed for analysis of the data captured from the VICON. The results of this study were as follows : 1. Comparing 20's∼30's and 40's∼60's the result shows that 40's∼60's have smaller ROM at the most joints(Thoratic and Lumber, Hip Joint, Knee Joint, Ankle Joint), which is inconsistent with the previous result. The reason is that most investigations were carried out using traditional measurement equipments, which have encountered difficulty in quantifying the exact motion of the body. 2. There are no significant mean difference between the right and the left side. Most of the significances were not high(〉0.05).

• Speech Sciences
• /
• v.14 no.1
• /
• pp.63-72
• /
• 2007

In this study, the researchers evaluate the hypothesis that the reaction time (RT) in the brain is largely dependent on age and gender. The researchers tested English and Korean words using two types: reading as visual stimuli, and listening as auditory stimuli. The E-Prime program installed in functional magnetic resonance imaging (f-MRI) was used. There are 136 Korean subjects in three groups: 30 children (5th and 6th grade elementary school students), 76 young adults (college students), and 30 adults (35-53 years old). In the listening test, the variation for the two languages was different among the three age groups, regardless of gender, whereas the data did not show meaningful differences in the reading test. The findings will provide some meaningful information regarding perception and acquisition of a foreign language.

• Journal of Engineering Education Research
• /
• v.20 no.4
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• Journal of Korean Society for Quality Management
• /
• v.39 no.3
• /
• pp.353-364
• /
• 2011

RAM(Reliability, Availability and Maintainability) is one of the important indicators to show the performance of weapon systems. For analyzing RAM characteristics, RAM simulation is useful and powerful as mathematical techniques. However, it is necessary to build the simulation model to express about the operation environment of weapon systems, and obtain detail input data for reliability and maintainability about the system to get accurate results by RAM simulation. In this paper, we propose a procedure to analyze RAM of the searching system consisting in weapon systems by RAM simulation and we estimate searching system availability by a commercial simulation program, AvSim.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.113-117
• /
• 2005

As a preliminary study of finding the relationship between the force at the grip and the success rate during putting stroke, the putting grip sensor system using FSR sensors was developed. The system consisted of the hardware which had the sensor part with 8 sensors per putting glove and data acquisition part as well as the software which had the real-time monitoring program and the offline post-processing program. After experiments with elite-golfer using this system, it is possible to suggest the proper force ranges at the grip during putting stroke.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2017

The inventory level of concurrent spare parts (CSP) has a significant impact on the availability of a weapon system. A failure rate function might be of particular importance in deciding the CSP inventory level. We developed a CSP optimization model which provides a compromise between purchase costs and shortage costs on the basis of the Weibull and the exponential failure rate functions, assuming that a failure occurs according to the (non-) homogeneous Poisson process. Computational experiments using the data obtained from the Korean Navy identified that, throughout the initial provisioning period, the optimization model using the exponential failure rate tended to overestimate the optimal CSP level, leading to higher purchase costs than the one using the Weibull failure rate. A Pareto optimality was conducted to find an optimal combination of these two failure rate functions as input parameters to the model, and this provides a practical solution for logistics managers.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.32-39
• /
• 1999

Digital signal processor (DSP) is used to obtain the peak value and the time difference of ultrasonic signals, to make digital filter, and to derive mathematical transformation from analog circuit. In this study, C-scan system and control program have been developed to high speed data acquisition. This system consists of signal processing parts (DSP, oscilloscope, pulser/receiver, digitizer), scanner, and control program. The developed system has been applied to a practical ultrasonic testing in overlay weld, and demonstrated high speed with precision