• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.291-298
• /
• 2003

The resonant column testing is a laboratory testing method to determine the shear modulus and the material damping factor of soils. The method has been widely used for many applications and its importance has been increased. Since the establishment of the testing method in 1963, the low-technology electronic devices for testing and data acquisition have limited the measurement to the amplitude of the linear spectrum. The limitations of the testing method were also attributed to the assumption of the linear-elastic material in the theory of the resonant column testing and to the use of the wave equation for the dynamic response of the specimen. For the better theoretical formulation of the resonant column testing, this study derived the equation of motion and provided its solution. This study also proposed the improved data reduction and analysis method for the resonant column testing, based on the advanced data acquisition system and the proposed theoretical solution for the resonant column testing system. For the verification of the proposed data reduction and analysis method, the numerical simulation of the resonant column testing was performed by the finite element analysis. Also, a series of resonant column testing were peformed for Joomunjin sand, which verified the feasibility, of the proposed method and showed the limitations of the conventional data reduction and analysis method.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.7-13
• /
• 2004

In this paper, we demonstrate that Common Mid-Point (CMP) cross-correlation gathers of multi-channel and multi-shot surface waves give accurate phase-velocity curves, and enable us to reconstruct two-dimensional (2D) velocity structures with high resolution. Data acquisition for CMP cross-correlation analysis is similar to acquisition for a 2D seismic reflection survey. Data processing seems similar to Common Depth-Point (CDP) analysis of 2D seismic reflection survey data, but differs in that the cross-correlation of the original waveform is calculated before making CMP gathers. Data processing in CMP cross-correlation analysis consists of the following four steps: First, cross-correlations are calculated for every pair of traces in each shot gather. Second, correlation traces having a common mid-point are gathered, and those traces that have equal spacing are stacked in the time domain. The resultant cross-correlation gathers resemble shot gathers and are referred to as CMP cross-correlation gathers. Third, a multi-channel analysis is applied to the CMP cross-correlation gathers for calculating phase velocities of surface waves. Finally, a 2D S-wave velocity profile is reconstructed through non-linear least squares inversion. Analyses of waveform data from numerical modelling and field observations indicate that the new method could greatly improve the accuracy and resolution of subsurface S-velocity structure, compared with conventional surface-wave methods.

• 비파괴검사학회지
• /
• 제31권5호
• /
• pp.552-559
• /
• 2011

전자기유도(electromagnetic induction) 현상을 이용한 비파괴진단기법으로서 최근까지 와전류탐상기법, 교류장측정기법, 자속누설검사기법, 그리고 원격장검사기법 등이 개발되어 활용되고 있다. 이 기법 중 와전류탐상기법은 오늘날 발전설비, 화학, 조선 및 군수설비 등의 열교환기 전열관 비파괴검사에 널리 적용되고 있다. 와전류탐상검사 시스템의 구성은 기능별로 와전류신호 합성 모듈, 아날로그 모듈, 디지털 신호처리를 위한 아날로그-디지털 변환 모듈, 전원공급장치 및 신호취득 평가 프로그램 등으로 구성되며, 선행 연구(I)에서는 다중채널방식의 와전류탐상검사 시스템의 구성 요소 중 1차로 와전류신호 합성 모듈, 아날로그 모듈을 설계 개발하였으며, 2차로 와전류 신호 취득 평가 프로그램을 개발하였다. 2차 연구에서 개발한 와전류 신호취득 평가 프로그램의 운영체제는 "Windows 7"로서 국내 사용자를 위해 최적화 하였으며, 주요 특징은 검사자가 "setup wizard"를 이용하여 검사에 필요한 검사 조건 및 변수를 용이하게 설정하고 이를 이용하여 신호취득 및 평가를 수행할 수 있다. 본 논문에서는 개발된 와전류신호 수집 및 평가 프로그램의 구성과 각 기능을 설명하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1969-1971
• /
• 2000

This paper presents a data acquisition and analysis program modules that has been developed using the Labview program. These program modules can use to acquire and analyze leakage current data of insulator under different contamination conditions. The experimental hardware made up salt fog chamber, AC/DC power supply, transducer (shunt resistor), measurement devices and PC with the GPIB (General Purpose Interface Bus). And analysis program modules can calculate pulse level count, accumulated charge, average leakage current, power spectrum, and harmonics. The result of applying these analytical program modules to polymeric insulator is available for evaluation of leakage current characteristic of outdoor insulators.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1086-1089
• /
• 2002

In this paper, an adaptive packet acquisition performance of a CDMA/TDD packet radio system is analyzed and simulated in a frequency-selective Rayleigh fading channel. The frequency-selective fading process is assumed to be WSSUS model which is typical for a satellite and a mobile radio communications. The performance is evaluated in terms of packet error probability. In this adaptive packet acquisition scheme, an auxiliary training sequence is placed within data packet to estimate time-varying channel state. From the simulation results, it is confirmed that the proposed acquisition scheme significantly improves packet error performance compared to the conventional fixed acquisition scheme, especially, for the case of low Doppler frequency. The analysis in this paper can be applied to the design of a CDMA/TDD packet radio system.

• 아동학회지
• /
• 제21권4호
• /
• pp.51-68
• /
• 2000

To reveal when toddlers and children acquire the grammatical morpheme of Korean language, this study investigated the way they respond to some picture tasks. The object of this research was 174 children ranging from 18 months to 60 months, who were selected from two child-care centers located in Seoul and Gyeongi Province. Following the statistical analysis of the data, this study ascertained that 2-, and 3- year-old children acquire the most part of grammatical morphemes such as nouns, pronouns, verbs, adverbs, adjectives, and interrogation terms. The fact that the process of acquisition was significantly different among six age groups has proved the hypothesis of the gradual acquisition of grammatical morpheme.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.48-58
• /
• 2020

Naval weapons systems of the Republic of Korea are acquired through the Defense Planning Management System. Recently, acquisition of some naval ships have been delayed, and the causes of the delays have been recognized as inappropriate project management at the Execution Phase. However, we argue that the delay problem in naval ships acquisition should be approached, with due regard for the entire Defense Planning Management System. That is, We should try to investigate from Planning Phase to those of Programming, Budgeting and Execution Phases. Therefore, in this study, we investigated the actual cases of the delay in naval acquisition at all phases of the Defense Planning Management System. Based on the investigation, we tried to identify the naval ship Acquisition Delay Factors and find out the Weights of those factors. As the next step, we calculated the Influence Measures on the naval missions, including the Cost of Naval Capability Gap derived from the delays in acquisition of naval ships. As a final step, we calculated the Acquisition Delay Measures based on the interrelationship between the Acquisition Delay Factors and the Influence Measures. Then we evaluated and analyzed what the results stand for. Finally, we made suggestions for future improvement. The improvement suggestions we made for preventing delay in acquisition of naval ships in this study are as follows. First, we need a shift in perception. It is necessary to measure the Acquisition Delay Factors in acquiring naval ships and manage them from the Planning Phase. Second, resolution must be concerted efforts. All relevant agencies, not just a few, should work together to resolve the problems of acquisition delay. Third, analysis must be based on the accumulation of data. This allows the elaborating of naval ship Acquisition Delay Factors and Delay Measures. If this research method is applied to other military weapons systems in the future, we may be able to not just identify the Acquisition Delay Factors in acquisition of other military weapons systems, but also pursue improvement in those cases.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.813-820
• /
• 2012

This paper presents the development of a software supported acquisition system for metrological verification and testing of the equipment for monitoring and analysis of the basic electrical power quality parameters. The described procedure consists of two functionally connected segments. The first segment involves generation of the reference three-phase voltage signals, including the possibility of simulation of the various power quality disturbances, typical for electrical power distribution networks. The second part of this procedure includes the real-time recording of power quality disturbances in three-phase distribution networks. The procedure is functionally supported by the virtual instrumentation concept, including a software application developed in LabVIEW environment and data acquisition boards NI 6713 and NI 9215A. The software support of this system performs graphical presentation of the previously generated and recorded signal waveforms. A number of the control functions and buttons, implemented on the virtual instrument front panels, are provided to adjust the basic signal acquisition, generation and recording parameters.

• 한국측량학회지
• /
• 제39권2호
• /
• pp.103-111
• /
• 2021

MMS (Mobile Mapping System) is being used for HD (High Definition) map construction because it enables fast and accurate data construction, and it is receiving a lot of attention. However, research on the use of MMS in the construction field is insufficient. In this study, road surveying and inspection of construction structures were performed using MMS. Through data acquisition and processing using MMS, point cloud data for the study site was created, and the accuracy was evaluated by comparing with traditional surveying methods. The accuracy analysis results showed a maximum of 0.096m, 0.091m, and 0.093m in the X, Y, and H directions, respectively. Each RMSE was 0.012m, 0.015m, and 0.006m. These result satisfy the accuracy of topographic surveying in the general survey work regulation, indicating that construction surveying using MMS is possible. In addition, a 3D model was created using the design data for the underpass road, and the inspection was performed by comparing it with the MMS data. Through inspection results, deviations in construction can be visually confirmed for the entire underground roadway. The traditional method takes 6 hours for the 4.5km section of the target area, but MMS can significantly shorten the data acquisition time to 0.5 hours. Accurate 3D data is essential data as basic data for future smart construction. With MMS, you can increase the efficiency of construction sites with fast data collection and accuracy.

• 영어어문교육
• /
• 제13권3호
• /
• pp.1-22
• /
• 2007

The study examined the effects of explicit derivational morphology instruction (henceforth DMI) on the incidental vocabulary acquisition and reading comprehension of 132 Korean 1st-year high school students who responded to a battery of tests (two vocabulary tests and a reading comprehension test). Multiple statistical tools were used to analyze the data: Analysis of Covariance (ANCOVA), Analysis of Variance (ANOVA), Simple Regression Analysis, Tests of Simple Main Effects, and effect size computation using Cohen's d. The results indicated that (a) DMI enhanced students' ability to infer word meanings in context, (b) DMI promoted high proficiency students' reading comprehension, whereas it impeded intermediate proficiency students' reading comprehension, (c) vocabulary knowledge has a strong positive predictive value for reading comprehension, and (d) the gaps of vocabulary knowledge across proficiency levels were still substantial, despite the observation that DMI promoted students' vocabulary acquisition. These results have a bearing on English as Foreign Language (EFL) reading pedagogy.