• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.80-85
• /
• 2013

Recently it is becoming more common to apply vehicle electronics(Vetronics) based on information technology to improve the operability of the combat vehicles. Although the vehicle electronics system has been gradually developed, it is hard not only to design the reliable system which is a built-in multi-function but also to analyze the fault failure in the state of on-vehicle when failures occur. Therefore, It is required the data logging system like a aircraft's black box for the combat vehicles to enhance the reliability. In this paper, we developed the multi data acquisition and analysis device which is acquiring real-time data such as communication data, video data and voice data available for checking operational status of system and managing history. The performance of device has been proved on the vehicle.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3716-3724
• /
• 2023

Loose parts monitoring and detecting alarm type in real Nuclear Power Plant have challenges such as background noise, insufficient alarm data, and difficulty of distinction between alarm data that occur during start and stop. Although many signal processing methods and alarm determination algorithms have been developed, it is not easy to determine valid alarm and extract the meaning data from alarm signal including background noise. To address these issues, this paper proposes a denoising autoencoder-based majority vote classification. Training and test data are prepared by acquiring alarm data from real NPP and simulation facility for data augmentation, and noisy data is reproduced by adding Gaussian noise. Using DAEs with 3, 5, 7, and 9 layers, features are extracted for each model and classified into neural networks. Finally, the results obtained from each DAE are classified by majority voting. Also, through comparison with other methods, the accuracy and the false alarm rate are compared, and the excellence of the proposed method is confirmed.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.108-118
• /
• 2013

This study has analyzed the process of space information perceived and recognized through the estimation of observation frequency and number according to the time range of observation data acquired from observation experiment with the object of hospital lobby. The followings are the results analyzed at this study. First, the continual observation of 3 and 6 times was attentive and conscious for probing to find an object rather than for acquiring exact information and that of 9 times could be regarded as the time for acquiring visual appreciation. However, the repetitive occurrence of high and low frequencies can be thought of repetitive acts for visual appreciation. Second, the continual observation of 3 and 6 times had the highest observation frequency of II, while that of 9 times had the highest observation frequency of III. In case of 3 and 6 times, the observation frequency had the tendency to become a little higher after being low since V, and in case of 9 times it had the repetition of becoming low and high and from IX it characteristically got higher. This feature can be thought to be the process that the subject repeats the fixation and movement of observation at a visual activity for perception and recognition. In the process of first observation, the observation frequency was the highest after 20 seconds or so, but since then, it gets lower and repeatedly gets higher and lower as time passes. After 90 seconds, the frequency showed the tendency of getting higher continuously. Third, the examination of changing features of frequency may show the characteristics of exploration for and attention to space but if the observation frequency is not associated with observation times for analysis there will a limitation that the features of observation frequency cannot be clarified. Accordingly, the simultaneous analysis of both is very effective for estimating the observation characteristics seen at the processes of perception and recognition. Fourth, the general analysis of the both revealed: with the progress of observation time the discontinuous space exploration decreased, and as the observation time got longer the fixed attention to a specific spot increased. Fifth, in order to estimate the observation characteristics by the change of time range the observation frequency and times by trend line was analyzed, which approach seems to be an appropriate technique that can comprehensively show the overall flow of time series data.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.63-69
• /
• 1999

The purpose of this study is to develop Water Quality Management System(WQMS), which performs calculating pollutant discharge and forecasting water quality with water pollution model. Operational water quality management requires not only controlling pollutants but acquiring and managing exact information. A GIS software, ArcView was used to enter or edit geographic data and attribute data, and MapObject was used to customize the user interface. PCI, a remote sensing software, was used for deriving land cover classification from 20 m resolution SPOT data by image processing. WQMS has two subsystems, Database Subsystem and Modelling subsystem. Database subsystem consisted of watershed data from digital map, remote sensing data, government reports, census data and so on. Modelling subsystem consisted of NSPLM(NonStorm Pollutant Load Model)-SPLM(Storm Pollutant Load Model). It calculates the amount of pollutant and predicts water quality. This two subsystem was connected through graphic display module. This system has been calibrated and verified by applying to Mokhyun stream watershed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.1
• /
• pp.19-27
• /
• 2007

Entering the 21st century, the demand on information service via mobile devices is skyrocketing along with the popularization of computers and mobile communication devices and the rapid development of wireless communication technology. In particular, as mobile device service such as LBS and Telematics becomes highlighted, the management of mobile devices is ever more drawing attention. However, since there is no fixed standard on geographical space data, many commercialized monitoring systems do not use common geographical space data but independent geographic information. Furthermore, as it is impossible to save location information of each mobile device by integrating such information after acquiring them, it is difficult to trace management. Therefore, in this paper, geographic data with DXF. DWG and SHP format, which are commonly used files, were created and visualized by GML format, OGC standard advice. And then, TMS(Trace Monitoring System of Mobile Device) that can trace and manage information after acquiring and saving space information that show the movement of users was implemented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.628-632
• /
• 2003

An intelligent miniature humanoid robot system is designed and implemented as a platform for researching walking algorithm. The robot system consists of a mechanical robot body, a control system, a sensor system, and a human interface system. The robot has 6 dofs per leg, 3 dofs per arm, and 2 dofs for a neck, so it has total of 20 dofs to have dexterous motion capability. For the control system, a supervisory controller runs on a remote host computer to plan high level robot actions based on the vision sensor data, a main controller implemented with a DSP chip generates walking trajectories for the robot to perform the commanded action, and an auxiliary controller implemented with an FPGA chip controls 20 actuators. The robot has three types of sensors. A two-axis acceleration sensor and eight force sensing resistors for acquiring information on walking status of the robot, and a color CCD camera for acquiring information on the surroundings. As an example of an intelligent robot action, some experiments on playing soccer are performed.

• Journal of Information Technology Applications and Management
• /
• v.21 no.1
• /
• pp.85-105
• /
• 2014

Exhibition industry is important business domains to many countries. Not only lots of countries designated the exhibition industry as tools to stimulate national economics, but also many companies offer millions of service or products to customers. Recommender systems can help visitors navigate through large information spaces of various booths. However, no study before has proposed a methodology for identifying and acquiring prospective visitors although it is important to acquire them. Accordingly, we propose a methodology for identifying, acquiring prospective visitors, and recommending the adequate booth information to their preferences in the exhibition industry. We assume that a visitor will be interested in an exhibition within same class of exhibition taxonomy as exhibition which the visitor already saw. Moreover, we use user-based collaborative filtering in order to recommend personalized booths before exhibition. A prototype recommender system is implemented to evaluate the proposed methodology. Our experiments show that the proposed methodology is better than the item-based CF and have an effect on the choice of exhibition or exhibit booth through automation of word-of-mouth communication.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2003

The close-range photogrammetry is a surveying technique the acquiring the 3D object from 2D geometric appearance shown in the image. Camera treatment is relatively so simple. Camera position refer to the object can be freely adjusted by locating the exposure station at any site. So it is used effectively on a small area or object for survey. In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in sub-pixel degree thorough digital close-range photogrammetry with bundle adjustment for local terrain model generation.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.83-92
• /
• 2003

The previous control point surveying, being standardized by trigonometric point which hasn't been unified in the whole country and producing put into operation through complex calculation process, has many problems about accurate results and economic side. Because most of trigonometric points that standardize a present surveying are in situation in top of the mountain, there are many difficulties in solving sight problems. Since trigonometric points are far away from one another, Differences are created because of limitation of point distance, observatory network construction and distribution of error. In the information age, the study about acquiring three dimension surveying information that uses GPS has been processed as fast as acquiring topography information is getting important gradually. For utilizing GPS in surveying work, deciding transformation 7-Parameters that changes data about location information which is received by GPS receiver is important. In this study, it is decided transformation 7-Parameters that can be used in ka-pyoung area by using GPS surveying production that had put into operation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.