• 패션비즈니스
• /
• 제21권1호
• /
• pp.74-87
• /
• 2017

The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.60-75
• /
• 2016

This research was conducted to understand the different circumstances for wearing shirts by adult males aged 20-39, and to provide this basic information to the shirt industry prior to developing new functional men's shirts. A total of 345 respondents participated in the survey. Most of questionnaire, frequency, mean and standard deviation were calculated and the differences between the 20s and 30s were analyzed by t-test or ${\chi}^2$ test. The results of the survey are as follows. Grading the satisfaction degree of their body parts, the respondents were relatively unsatisfied with their height, weight, and waist, abdominal and hip circumferences. Majority preferred department stores, discount stores and outlets for purchasing shirts. Many have never owned tailored shirts - men in 20's had less experience with tailoring than men in 30's. The foremost selection criterion for purchasing shirts was fit -during purchase, men in their 20's considered fit more important than men in their 30's. The most preferred unbuttoning of the top button when wearing shirts. For favored collar shapes with one button unbuttoned, the most valued collar angle and style was V-neck shape when unbuttoned, low collar band, collar with unopened collar, and stiff collars. Most shirt designs and details included slim fit, no dart in the front and one dart on the back. Men in 20's more preferred the no dart in the front and one tuck on the back, as compared to men in 30's. On the other hand, men in their 30's preferred one dart shirts than men in 20's. Regarding shirt bands and cuffs, one button and regular collar and one button cuffs with round angle design, were the most preferred, respectively.

• 복식문화연구
• /
• 제19권5호
• /
• pp.929-944
• /
• 2011

The purpose of this study was to compare and analyze two original forms of slacks for thesis to extract outward appearance of design original form applying design measures of the above through diverse research methods. The results of this study are as follow: In original form F, the original form of slacks sloper suitable to elderly women 65~9 years old was W/4+3.5+0.5cm in the front/back circumference of waist, H/4cm in the front/back circumference of hip, (H/4+1+3.8)/2cm in the position of centerline, 19cm in actual measurement value of hip length, 25cm in actual measurement value of crotch depth, (knee crotch circumference~bottom line)/2+10cm and 90 (side waist dot~ lateral malleolus length)cm in actual measurement. front dart position was 1/3 and 2/3 of front waist centerline and back dart position was 1/3 and 2/3 of back waist circumference. It was suggested that front dart quantity (length) was 3.5(11)cm, back dart quantity 3.4 (10.2)cm, side waist up quantity 0.7cm, back down quantity 1.5cm, front crotch width (H/4+1)/4-1cm, back crotch width (H/4+1)/4+4, front knee width 21.8cm, back knee width 24.4cm, front pant leg 20.8cm, and back pant leg 23.4cm.

• 정보과학회 논문지
• /
• 제43권9호
• /
• pp.1034-1042
• /
• 2016

영역기반 영상정합은 미리 정의된 특징의 도움 없이 영상을 정합할 수 있기 때문에, 기계학습과 접목된다면 이론 상 다양한 영상정합 문제에 적용 가능하다. 그러나 신속한 정합을 위하여, 미리 정의된 특징을 탐지하여 패치 쌍 후보를 선정에 사용하는데, 이는 영역기반 방법의 적용성에 제약을 준다. 이를 해소하기 위하여 본 연구에서는 단순히 두 패치의 관련도 뿐만 아니라 두 패치가 어느 정도 공간 상 떨어져 있는지에 대한 정보를 제공하는 ConvNet Dart를 개발하였다. 이러한 정보를 기반으로 효율적으로 패치 쌍 탐색공간을 줄일 수 있었다. 추가로 Dart가 제대로 작동할 수 없는 영역을 식별하는 ConvNet Fad를 개발하여 정합의 정밀도를 높였다. 본 연구에서는 이들을 딥러닝으로 학습하였으며, 이를 위해 소수의 정합된 영상에서 다량의 예제를 생성하는 방법을 개발하였다. 마지막으로 단순한 영상정합 문제에 성공적으로 적용하여, 이러한 방법론이 작동하는 것을 보였다.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.468-478
• /
• 2018

Background: The restriction of wrist motion results in limited hand function, and the evaluation of the range of wrist motion is related to the evaluation of wrist function. To analyze and compare the wrist motion during four selected tasks, we developed a new desktop motion analysis system using the motion controller for a home video game console. Methods: Eighteen healthy, right-handed subjects performed 15 trials of selective tasks (dart throwing, hammering, circumduction, and winding thread on a reel) with both wrists. The signals of light-emitting diode markers attached to the hand and forearm were detected by the optic receptor in the motion controller. We compared the results between both wrists and between motions with similar motion paths. Results: The parameters (range of motion, offset, coupling, and orientations of the oblique plane) for wrist motion were not significantly different between both wrists, except for radioulnar deviation for hammering and the orientation for thread winding. In each wrist, the ranges for hammering were larger than those for dart throwing. The offsets and the orientations of the oblique plane were not significantly different between circumduction and thread winding. Conclusions: The results for the parameters of dart throwing, hammering, and circumduction of our motion analysis system using the motion controller were considerably similar to those of the previous studies with three-dimensional reconstruction with computed tomography, electrogoniometer, and motion capture system. Therefore, our system may be a cost-effective and simple method for wrist motion analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1480-1484
• /
• 2004

In this paper, a self-propulsive and small concrete floor finishing trowel robot with twin trowels is proposed. Due to the small size and omni-directional moving capability, it is adequate for small space such as apartment. By adjusting the posture of trowels, it can move in any direction without wheels. We used cheap PIC processor for the cost saving design of the modules and adopted mode processors for easy operation of control stick. For the position control of the robot, we made a motion control algorithm appealing to the stepping motor driver module and the wireless communication module between the robot and PC (or control stick). In this paper, we discuss the control problem of the floor finishing robot in order to move to the right position. By comparing experimental result with simulation, we show the validity of the robot mechanism, sensors, and the control system.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.93-101
• /
• 2015

This study aims to suggest the patternmaking method of men's slim-fit six-panel jacket sloper in their 30's. The researcher collected four kinds of existing slopers and carried out appearance evaluations twice. The researcher's sloper was developed by modifying and supplementing the existing sloper with high scores from the evaluations. The results are as follows: first, when comparing the four kinds of existing slopers, dimensions and patternmaking methods of 18 areas, especially width of back chest and side chest, were varied according to the existing slopers. Second, the researcher's sloper had excellent scores in the appearance evaluations such as placements of side line on the chest, waist, hip line, measurement in dimension from the center back hip line and from waist line, and appearance of neck line. Third, the suggested sloper are as follows: the ease on the chest is 10.5 cm, 8~10 cm extends for the jacket length, the measure in dimension from the back waist is 2.2 cm, dart intake at the back side is 4 cm, dart intake at the front side is 1.5~2 cm, and dart intake at the front waist is 1 cm. This suggested six-panel jacket sloper is expected to be useful for the various slim-fit jacket designs which have the side panels.

• 복식문화연구
• /
• 제11권4호
• /
• pp.562-577
• /
• 2003

The object of my research is to inquiry into the immediate constituent and techniques of underwear after looking into basic theory of underwear, techniques by materials classified according to the matter of elasticity, and studying flat pattern and draping which are basis of corset and brassiere structure focusing on corsetry among underwears and production techniques. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. To make the flat pattern of corset and brassiere fit to the body tightly, design dart two times without any space and draw smaller than the body. To support the breast sufficiently, move the side seam 1¼″ to the front panel and the seam should pass the apex in all occasions. For draping, dart should be added into short of elasticity materials in the past but dart is no use these days since the material today is extremely elastic. It is possible now to show the body line with only the seam or a pattern. In a case of elastic material, set the elastic direction to the grain line and have a draping as pulling from the center to the out side. As production technic, for an hem, put a zigzag stitch in elastic materials with a 10-20% short elastic band, pulling the band. Then make 3/16″-1/4″ short inseam.

• 한국가정과학회지
• /
• 제3권2호
• /
• pp.112-119
• /
• 2000

The purpose of this study is to investigate the bodice patterns by analyzing sensory evaluations. Anthropomatric data was collected between April and October of 2000. Total 283 body measurements were collected for this study including both direct and indirect measurements(29 variables from the direct anthropometric data. 5 variables from the indirect anthropometric data). Data were analyzing using percentiles. standard deviation and Anova. The appearance and fit of three kinds of bodice patterns (N. L. H type) were evaluated by expert panel and the subjects. The results of the anthropometric measurements and sensory evaluations are as follows : A significant differences (p$\leq$.001) in the height, width and girth Items was found. The results of the bodice pattern evaluations by expert panel indicates that a significant difference (p${\le}$.05) in the responses to the placement of the waist dart, the fit of the bust area and the placement o( the back shoulder dart for 20's and 30's. The result of the evaluations by subjects indicates that a significant difference (p${\le}$.05) in the responses to the placement of the waist dart for 40's. A significant difference (p${\le}$.05) in the responses to the suitability of the shoulder area among the age groups.

• 생약학회지
• /
• 제41권3호
• /
• pp.161-165
• /
• 2010

A study was performed to assess the quality equivalence of commercially available Hwang-Ryun-Hae-Dok-Tang granules from various vendors in terms of the contents of characterizing compounds. 'Hwang-Ryun-Hae-Dok-Tang'(or 'Huanglian Jiedu Tang') is the complex medicinal herbal product which is composed of four different herbal drugs; Scutellariae Radix, Coptidis Rhizoma, Phellodendri Cortex and Gardeniae Fructus. Using a high performance liquid chromatography and direct analysis in real time mass spectrometer (DART-MS), five characterizing compounds such as baicalin, baicalein, berberine, palmatine, and geniposide were analyzed to compare the variance of the contents between the products from four different vendors. Although five characterizing compounds were all successfully detected from all the products, the contents of each compound were shown to have significant difference among vendors. For real time monitoring of characterizing compounds in medicinal herbal products, DART-MS can be successfully adopted as a powerful analytical tool.