• International Journal of Safety
• /
• 제6권1호
• /
• pp.22-25
• /
• 2007

Damping out high frequency low amplitude structural vibrations using PZT bimorph is presented. Static and Dynamic analyses of the piezoelectric bimorph bender were performed. Three layer piezoelectric actuators were modeled with SOLID5 coupled-field elements using ANSYS. Static deflection and modal analyses of the piezoelectric bimorph bender are presented. Proper tuning of the values of the resistor and inductor in the shunt circuit is required for maximum vibration suppression.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.321-322
• /
• 2010

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.81-87
• /
• 2017

본 연구는 고속열차 시운전 시험과 이에 따른 주행동특성 고찰 및 개선에 관한 것이다. 고속열차 시운전 시험을 통한 선행 연구에서 도출한 요댐퍼 설치 방법에 따른 후미 진동 개선 방안을 실제 고속철도 차량의 시운전시에 적용하여 후미 진동 저감 효과가 있음을 확인하였다. 또한 전체 차량에 대한 진동저감 방안을 동역학 해석 소프트웨어를 사용하여 수치 해석적 방법으로 도출하였으며, 그 효과를 시운전 시험을 통하여 확인하였다. 개선된 설계안은 실제 2층 고속열차 객차에 적용되어 주행동특성 문제없이 시운전을 진행하였다. 차세대 고속열차 임계속도에 영향을 미치는 현가장치 파라미터들에 대한 민감도 분석을 수행하였으며, 임계속도에 크게 영향을 미치는 4개의 설계변수를 도출하였는데, 이는 1차 탄성조인트 열차진행 방향 강성, 2차 요댐퍼 시리즈 강성, 2차 횡댐퍼 댐핑계수, 차간 댐퍼 댐핑계수 순이었다. 이 설계변수에 대한 최적화를 통하여 임계속도를 23.3% 향상시키는 현가장치 파라미터를 제시하였으며, 이는 차세대 고속열차 상용화 모델의 설계에 이용될 수 있다.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.252-257
• /
• 1995

Growth rates of the low temperature growing isolates, Pseudomonas fluorescens M45 and MC07, reached maximum stationary phase within 50 hrs at the low temperature, 4$^{\circ}C$. But an ordinary biocontrol agent P. putida Pf3 did not reach logarithmic growth phase until 80 hrs. The culture filtrates of M45 and MC07 significantly inhibited the mycelial growths of Pythium ultimum, Rhizoctonia solani and Phytophthora capsici. Detached cotyledons of cucumber grown on Murashige and Skoog agar medium were much enhanced in their growth, compared to those without the filtrates. Population densities of M45 and MC07 in the rhizosphere at 14$^{\circ}C$ were more stable than at 27$^{\circ}C$. When M45 and MC07 were treated into soil, the population density of MC07 continuously increased up to 9 days after treatment, and sustained the initial inoculum density up to 60 days. Cucumber damping-offs caused by P. ultimum and R. solani were significantly reduced by applying M45 as seed-inoculant and by soil treatment with MC07. The combined treatment of M45 and MC07 provided greater effect in reducing the disease incidence than that obtained by single treatments.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.383-390
• /
• 2005

This study proposes an innovative design guideline to assist the evaluation and improvement of the dynamic comfort of vehicle seating. The existing evaluation method for the comfort of vehicle seating was investigated to broach problems in evaluation. It was found that the currently existing evaluation method employs the resonance frequency of the vibration system composed of the seat and the human body and the maximum vibration transmissibility. This study proposes a design guideline aimed at the enhancement of vibration transmission characteristics above the resonance range, particularly within the range of 10-18 Hz. In order to meet this guideline, a seat was constructed out of foam having a low damping coefficient. It was then installed in a vehicle for a driving test. The driving test confirmed the improvement of the dynamic comfort of the seat. The result of evaluation of the improved seat using the SEAT index, an industry standard widely used to evaluate the dynamic comfort of a seat considering the perceptivity characteristics of the human body, showed that the perceptive vibration transmission had reduced by more than $11\%$. The effect of the modification of seat foam was also verified through a subjective assessment of dynamic comfort of the seats.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.203-217
• /
• 2013

A PTO (power-take-off) mechanism by using relative heave motions between a floating buoy and its inner mass (magnet or amateur) is suggested. The inner power take-off system is characterized by a mass with linear stiffness and damping. A vertical truncated cylinder is selected as a buoy and a special station-keeping system is proposed to minimize pitch motions while not affecting heave motions. By numerical examples, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC(wave energy converter) theory. Then, based on the developed theory, several design strategies are proposed to further enhance the maximum PTO, which includes the intentional mismatching among heave natural frequency of the buoy, natural frequency of the inner dynamic system, and peak frequency of input wave spectrum. By using the intentional mismatching strategy, the generated power is actually increased and the required damping value is significantly reduced, which is a big advantage in designing the proposed WEC with practical inner LEG (linear electric generator) system.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.447-454
• /
• 2011

This paper reports a filtered velocity feedback(FVF) controller, which is an alternative to direct velocity feedback(DVFB) controller. The instability problems due to high frequency response under DVFB can be alleviated by the suggested FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The FVF controller and the dynamics of clamped beams under forces and moments are first formulated. The effects of the design parameters(cut-off frequency, gain, and damping ratio) on the stability and the performance are then investigated. The cut-off frequency should be selected not to affect the system stability. The magnitude of the open loop transfer function(OLTF) at the cut-off frequency should be small. As increasing the gain of the FVF controller, the magnitude of the OLTF is increased, so that the closed loop response can be reduced more. The enhancement of the OLTF at the cut-off frequency is reduced but the phase behavior around the cut-off frequency is distorted, as the damping ratio is increased. The control performance is finally estimated for the clamped beam. More than 10 dB reductions in velocity response can be achieved at the modal frequencies from the first to eighth modes.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.61-68
• /
• 2015

The performance enhancement of various structural building systems from natural hazards has become an inctreasingly important issue in engineering field. In this paper, visco-elastic(VE) CST30 damping systems were tested under cyclic loadings to evaluate their performance in terms of ductility and energy dissipation. Main test variables are relative shear stiffness, rate of loading frequency, and thickness of specimens to evaluate the seismic capacity based on the performance criteria. This experiment was performed using a total of 12 specimens, subjected to cyclic loadings up to a shear deformation of 500%. All the CST30 dampers provided a ductile and stable hysterestic behavior when subjected to the demands of large shear stiffness and different loading frequencies. The test results showed that the CST30 dampers are an effective damping systems to enhance the buildings performance for remodeling and retrofit of buildings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.264-270
• /
• 2011

This paper reports a filtered velocity feedback (FVF) controller, which is an alternative to direct velocity feedback (DVFB) controller. The instability problems due to high frequency response under DVFB can be alleviated by the suggested FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The FVF controller and the dynamics of clamped beams under forces and moments are first formulated The effects of the design parameters (cut-off frequency, gain, and damping ratio) on the stability and the performance are then investigated. The cut-off frequency should be selected not to affect the system stability. The magnitude of the open loop transfer function (OLTF) at the cut-off frequency should be small. As increasing the gain of the FVF controller, the magnitude of the OLTF is increased, so that the closed loop response can be reduced more. The enhancement of the OLTF at the cut-off frequency is reduced but the phase behavior around the cut-off frequency is distorted, as the damping ratio is increased The control performance is finally estimated for the clamped beam. More than 10dB reductions in velocity response can be achieved at the modal frequencies from the first to eighth modes.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.734-742
• /
• 2011

In this paper a robust method is presented for the combined design of STATCOM and Power System Stabilizer (PSS) controllers in order to enhance the damping of the low frequency oscillations in power systems. The combined design problems among PSS and STATCOM internal ac and dc voltage controllers has been taken into consideration. The equations that describe the proposed system have been linearized and a Fuzzy Logic Controller (FLC) has been designed for the PSS. Then, the Particle Swarm Optimization technique (PSO) which has a strong ability to find the most optimistic results is employed to search for the optimal STATCOM controller parameters. The proposed controllers are evaluated on a single machine infinite bus power system with the STATCOM installed in the midpoint of the transmission line. The results analysis reveals that the combined design has an excellent capability in damping a power system's low frequency oscillations, and that it greatly enhances the dynamic stability of power systems. Moreover, a system performance analysis under different operating conditions and some performance indices studies show the effectiveness of the combined design.