• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1030-1035
• /
• 2003

The nanoimprint lithography technology makes higher density of semiconductor device and larger capacity of storage media. In this technology the induced damage while detaching polymer pattern from mold should be minimized. In order to analyze the problem, the basic knowledge of adhesion between the polymer and the mold is required. In this study a contact experiment of polyisobutylene specimen with spherical steel tip and polyisobutylene bead tip was conducted using nano indenter. During the contact experiment with various loading rate under load control the contact behavior of viscoelastic material was measured, i.e., the load and displacement between the tip and the specimen were measured. The data was analyzed by HBK model to obtain the stress intensity factor of contact edge and the contact radius as a function of time. Also the adhesion energies between steel/polyisobutylene and polyisobutylene/polyisobutylene were obtained employing the analysis of the crack of viscoelastic material by Schapery.

• Wind and Structures
• /
• 제23권1호
• /
• pp.75-90
• /
• 2016

A probabilistic approach that combines structural demand hazard analysis with cumulative damage assessment is presented and applied to a steel tower of a wind turbine. The study presents the step by step procedure to compare the reliability over time of the structure subjected to fatigue, assuming: a) a binomial Weibull annual wind speed, and b) a traditional Weibull probability distribution function (PDF). The probabilistic analysis involves the calculation of force time simulated histories, fatigue analysis at the steel tower base, wind hazard curves and structural fragility curves. Differences in the structural reliability over time depending on the wind speed PDF assumed are found, and recommendations about selecting a real PDF are given.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.809-824
• /
• 2017

The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.

• 지구물리와물리탐사
• /
• 제27권2호
• /
• pp.144-153
• /
• 2024

최근 탄성파를 기반으로 건축물 안전진단(structure health monitoring, SHM)을 수행하는 방법들에 대한 연구들이 많이 수행되고 있다. 특히 지구물리탐사에서 주로 적용되어 오던 배경 잡음을 이용하는 탄성파 간섭법(seismic interferometry)이 SHM에 많이 적용되고 있다. 탄성파가 건축물 내부로 전파하며 발생하는 건축물의 반응을 분석하여 건축물의 강성 변화를 추정할 수 있을 뿐만 아니라, 건축물의 손상 여부와 그 위치도 평가할 수 있다. SHM에 적용되는 탄성파 간섭법에 대해 분석한 뒤 실제 적용 사례들도 분석한 결과, 탄성파 간섭법은 건축물의 안정성 평가나 모니터링 등에 적용할 수 있는 건축물 손상 탐지 평가 방법으로써 매우 효과적으로 활용할 수 있다고 판단된다.

• 한국방재학회 논문집
• /
• 제10권4호
• /
• pp.9-16
• /
• 2010

구조물 상시모니터링에서 센서위치 최적화는 모니터링 결과에 중요한 영향을 준다. 따라서 본 논문은 구조계수 또는 손상도를 추정하기 위한 목적으로 동특성 자료를 계측하고자 할 때, 충분한 정보를 획득할 수 있는 최적의 계측점을 선정하는 방법을 제안하였다. 제안된 방법은 유전자 알고리즘을 계측점 선정을 위한 최적화 기법으로 사용하는 것이다. 유전자 알고리즘의 핵심인 적합도함수를 구조계수에 의한 모드벡터의 민감도와 모드벡터의 직교성을 고려할 수 있도록 구성하였다. 간단한 타워 구조물에 대한 예제 해석을 통해 제안된 방법의 타당성을 확인하였다. 적합도함수를 구성하고 있는 모드 민감도와 모드 직교성이 최적 계측점 선정에 어떤 영향을 주는지 예제해석을 통하여 분석하였다. 결론적으로, 제안된 적합도 함수를 사용하면 계측 목적에 타당한 계측점을 선정할 수 있음을 확인하였다.

• 대한통합의학회지
• /
• 제10권3호
• /
• pp.73-84
• /
• 2022

Background : Lymphedema is a progressive disorder characterized by the impairment of lymph flow from tissues to the blood circulation system. This occurs as a result of damage to the lymphatic system. Complex decongestive therapy (CDT) is a multimodal, conservative therapeutic approach that is used for the management of lymphedema. CDT consists of a combination of compression therapy, manual lymphatic drainage, exercise, and skin care. Purpose : This study aimed to provide a review of available physical therapy interventions as well as general care guidelines for patients with lymphedema. Methods : The recommendations and guidelines for physical therapy management, medical management, and general information were reviewed from the following sources: 1) The American Physical Therapy Association, 2) The Norton School of Lymphatic Therapy, and 3) The International Society of Lymphology. This review contains general information, including the medical management and the importance of physical therapy in lymphedema. Physical therapy management should be based on an assessment of the patients' presenting impairments, including based on inclusion or exclusion of physical therapy interventions. This review also outlines a step-by-step approach that starts with disease diagnosis and progression all the way through to rehabilitation as an outpatient. Conclusion : Depending on the patients' journey to recovery and the requirement for rehabilitation, physical therapy interventions should focus on the patients' needs including pain, appearance, physical function and general rehabilitation. We hope that this review will provide information on evidence-based physical therapy and general care to patients with lymphedema.

• 콘크리트학회논문집
• /
• 제19권1호
• /
• pp.91-102
• /
• 2007

최근 세계 각 지역의 지진피해를 계기로 철근콘크리트 교량 구조물의 비탄성 거동 능력에 기초한 새로운 내진설계법의 필요성이 대두되었다. 본 연구는 철근콘크리트 교량에 대한 성능에 기초한 취약도 해석 결과를 제시하였다. 철근콘크리트 교량의 비선형 시간이력해석을 위해 몬테칼로시뮬레이션(Monte carlo simulation) 기법이 이용되었다. 취약도 곡선을 산출하기위해 로그정규분포(log-normal distribution)를 보이는 두 변수를 이용하였으며 이러한 취약도 변수는 철근콘크리트 교각의 손상을 각각의 손상 기준에 따라 최대우도법(maximum likelihood method)을 이용하여 산출하였다. 취약도 곡선을 산출하기위하여 5종의 손상 상태를 교각의 내진성능에 가장 큰 영향을 미치는 변위연성도와 곡률연성도로 제시하였다. 각각의 손상 상태는 여러 실험 결과를 토대로 연성도를 이용하여 정량적으로 제시하였다. 따라서, 본 연구에서는 철근콘크리트 교각의 성능에 기초한 취약도 곡선을 제시하였다. 이러한 취약도 분석 기법은 다양한 교량 구조물의 지진에 의한 손상확률을 도출할 수 있으며 나아가 지진 재해도를 작성할 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.519-527
• /
• 2020

Dynamic analysis of a vehicle-track coupling system is important to structural design, damage detection and condition assessment of the structural system. Deterministic analysis of the vehicle-track coupling system has been extensively studied in the past, however, the structural parameters of the coupling system have uncertainties in engineering practices. It is essential to treat the parameters of the vehicle-track coupling system with consideration of uncertainties. In this paper, a method for predicting the bounds of the vehicle-track coupling system responses with uncertain parameters is presented. The uncertain system parameters are modeled as fuzzy variables instead of conventional random variables with known probability distributions. Then, the dynamic response functions of the coupling system are transformed into a component function based on the high dimensional representation approximation. The Lagrange interpolation method is used to approximate the component function. Finally, the bounds of the system's dynamic responses can be predicted by using Monte Carlo method for the interpolation polynomials of the Lagrange interpolation function. A numerical example is introduced to illustrate the ability of the proposed method to predict the bounds of the system's dynamic responses, and the results are compared with the direct Monte Carlo method. The results show that the proposed method is effective and efficient to predict the bounds of the system's dynamic responses with fuzzy variables.

• 한국가금학회지
• /
• 제26권1호
• /
• pp.1-25
• /
• 1999

Concerns about meat quality, including chicken meat, for the human diet has led to many attempts to manipulate the carcass fat and increase the eating quality. For actual eating quality, the birds must be grown and finished in a manner that results in meat that are tender, succulent and of good flavor, as well as being free from any foreign taint, flavor or safety hazard. Tenderization treatment with high voltage(820V) electrical stimulation and prechill muscle tensioning would improve the tenderness of chicken meat. Proper programs for the withdrawal of feed and water require a team approach for maximizing yield of meat and minimizing carcass contamination. Also effding of supplemental levels of-tocopherol to poultry with vegetable or fish oils increases of desirable polyunsaturated fatty acid(PUFA) content and stablizes the meat against rancidity and fish off-flavors. The nutritional effects of varying dietary ingredients on broiler carcass fat content are also important. Increasing the levels of energy in the ration increases the carcass fat content, while increasing the proteing levels decreases carcass fat content. Supplement-tation of poultry diets with amino acids such as methionine, lysine, glycine and tryptophan as well as amino acid such as well as amino acid mixtures can reduce body fat deposition. Normal stress leads to chicken muscular damage resulting in reduced meat quality, but this can be controlled by preslaughter management practices. Feed manufactures can utilize ntilize nutrient modulation to control pale soft exudative(PSE)syndrome. Finally, the success in poultry meat production depends on the consistent achievement of carefully selected levels of quality. Quality assurance should be the wider function of incorporating quality into the production system and the combination of motivating quality into actions and operations.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.116-121
• /
• 2006

Most high-k materials are well known not to be etched easily, Some problems such as low etch rate poor sidewall angle, plasma damage, and process complexity were emerged from the high-density DRAM fabrication. Chemical mechanical polishing (CMP) by a damascene process was proposed to pattern this high-k material was polished with some commercial silica slurry as a function of pH variation. Sufficient removal rate with adequate selectivity to realize the pattern mask of tera-ethyl ortho-silicate (TEOS) film for the vertical sidewall angle were obtained. The changes of X-ray diffraction pattern and dielectric constant by CMP process were negligible. The planarization was also achieved for the subsequent multi-level processes. Our new CMP approach will provide a guideline for effective patterning of high-k material by CMP technique.