• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.6
• /
• pp.17-27
• /
• 2011

Prunus serrulata var. serrulata f. spontanea (E. H. Wilson) C. S. Chang was treated with dried swine excrement at various concentration levels, and their growth reactions and the contents of total kjeldahl nitrogen and total phosphoric acid were analyzed. The result is as follows; 1. When the plants were treated with 0.25% of dried swine excrement, the seed germination rate of Prunus serrulata var. serrulata f. spontanea was higher than that of the control. However, it showed a tendency to decrease when the treatment concentration got higher than 0.25%. 2. The growth rate of species was highest when they were treated with 0.25% of dried swine excrement. It tended to decrease with higher treatment concentration than 0.25%. Significant difference was clear between the control and the experimental plants of Prunus serrulata var. serrulata f. spontanea. 3. The contents of nitrogen and phosphoric acid in Prunus serrulata var. serrulata f. spontanea also got higher as the concentration of dried swine excrement increased. However, the content of total kjeldahl nitrogen was highest in the leaves, and followed by the roots and stems. In contrast, the content of total phosphoric acid were highest in the roots, and followed by the leaves and stems. Therefore, stems had the lowest contents of both nitrogen and phosphoric acid. 4. The contents of total kjeldahl nitrogen and total phosphoric acid in the soil were measured before and after the growth experiment of Prunus serrulata var. serrulata f. spontanea treated with dried swine excrement. The contents of nitrogen and phosphoric acid significantly decreased after the experiment. In conclusion, the contents of total kjeldahl nitrogen and total phosphoric acid accumulated in the plants increased as the concentration level of dried swine excrement got higher. The seed germination and plant growth rates were best at 0.25% treatment of dried swine excrement. The treatment of dried swine excrement may bring high effects on increasing the plant growth rate but could damage the plants with higher concentration than they need. Different optimal concentration levels of dried swine excrement for different plants should be found before it is used as fertilizer.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.368-374
• /
• 1999

This study was designed to investigate effects of pulsed electric field (PEF) treatment on physiological changes of microbial cells, using domestically fabricated pilot scale PEF device. The effect of non-thermal PEF treatment on physiological characteristics of microorganisms was determined by salt resistance, the amount of UV absorbents, cell staining, recovery rate of defected cells, and changes in structure of cell membrane. Salt resistance of Escherichia coli, Bacillus subtilis and Rhodotorula minuta was examined after PEF treatment at 40 kV/cm, 84 pulse, $10{\mu}s$ pulse duration. Approximately $1\;log_{10}$ cell number of viable microorganisms was decreased by addition of salt. PEF treatment significantly increased the amount of UV absorbents at 260 and 280 nm because of leakage from damaged cell membrane by PEF treatment. Although three kinds of microorganisms treated by PEF were difficult to be observed due to their cell membrane damage, untreated cells were clearly observed by a microscope. PEF-treated R. minuta was not stained by methylene blue due to cell membrane defect. When E. coli, B. subtilis and R. minuta were cultured after PEF treatment, they showed 5, 4, and 8 hr longer lag phase, respectively, compared to control, but growth rates were not affected.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1055-1061
• /
• 2014

Innovative freezing technology is currently applied to preserve foodstuffs for long-term storage. Generally, the quality of frozen food is closely related to the types of freezing and thawing processes. In this study, we characterized the physicochemical properties of onions depending on freezing rate. When onions were frozen at $-40^{\circ}C$, freezing rates were 0.1, 0.5, and $0.7^{\circ}C/min$ depending on air-blast quick freezer mode. Onions were thawed by microwave irradiation at 400 W. Hardness of onion dramatically decreased after freezing and thawing compared with blanched onion. However, the fastest freezing rate did not affect hardness. Thawing loss of onion decreased with a faster freezing rate. For morphological observation, onion frozen at a faster rate showed a smaller ice-crystal size. Vitamin C content decreased upon blanching or freezing, but there was no significant difference according to freezing rate. Although free sugar content also decreased upon blanching and freezing, its highest content was at $0.7^{\circ}C/min$ freezing. Among organic acids, malic acid content was highest at $0.7^{\circ}C/min$ freezing. Based on this study, it could be suggested that a faster freezing rate is effective to improve frozen food quality in accordance with preventing tissue damage or minimizing destruction of nutrients.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.556-563
• /
• 2006

We present a comprehensive study of a chirped pulse Ti:sapphire regenerative amplifier system operating at 1 kHz. Main constituents of the system are described in detail. The amplifier stage was first converted to a repetition rate-tunable kHz gain-switched nanosecond Ti:sapphire laser. Operation characteristics at different repetition rates such as build-up times of laser pulses, pump power-dependent output powers and pulse durations, damage thresholds, and tunability ranges were studied. Based on the results achieved, the switching time of the Pocket's cell used and the round trip numbers in the regenerative amplifier were optimized at 1 kHz. The output pulses with a pulse width of 50fs from a home-made Ken lens mode-locked Ti:sapphire oscillator were used as seed pulses. The pulses were expanded to 120ps in a grating stretcher prior to coupling into the 3-mirror amplifier cavity. After amplification and recompression, a stable 1kHz Ti:sapphire regenerative amplifier system, which delivers 85-fs, $320-{\mu}J$ pulses, was fully constructed.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.196-201
• /
• 2014

This study was conducted to develop economic injury level (EIL) of sweet potato whitefly, Bemisia tabaci, on oriental melon. In greenhouse, seedlings of oriental melon were transplanted at June 8, 2010 and we inoculated adult B. tabaci with the density of 0, 1, 5, 10, or 20 per ten leaves at July 14. Adult of B. tabaci increased approximately twenty five-fold at 60 days after inoculation in the plot of 20 adults per ten leaves. The damages on leaves and fruits by B. tabaci were started to appear at 20 days after inoculation, and the damage rates of leaves or fruits were 28.5 or 31.5 percent at 60 days after inoculation, respectively, in the plot of inoculation with 20 adults per ten leaves. The yield of oriental melon was reduced as the inoculation density of B. tabaci increased, and the relationship between inoculation density of B. tabaci and the rate of damaged fruit could be described by a linear regression Y = 0.961x + 0.0562 ($R^2$ = 0.976). Based on the relationship, the economic injury level was 5.1 adults of B. tabaci per leaf and the control threshold estimated by 80% level of economic injury level was 4.1 adults per leaf for control of sweet potato whitefly.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.29-34
• /
• 2003

In development of the processed food, it is important not only to make the food delicious but to enhance its storage span and thermal stability without change in color, which greatly affects the tastes. Protopectinase (PPase) from Bacillus subtilis EK11 hydrolyses or dissolves protopectin in the middle lamella of plant tissues with the resultant separation of plant cells from each other, called enzymatic maceration. With the PPase, persimmon was enzymatically macerated to separate cells to primary cell wall without damage. Recovery rates of persimmon treated with PPase and mechanical maceration were 95% and 85%, respectively. Total and reducing sugars, crude protein and fat in the enzymatic maceration were well preserved as in the mechanical maceration. Importantly, over 50% of vitamin C, which is the most unstable component during the mechanical maceration, remained with an intact form for one day after the enzymatic treatment. When the suspensions of persimmon macerated with both treatments were stored at 4$^{\circ}C$ for 9 days, the mechanically macerated persimmon suspension was decolorized, whereas decolorization, was not found in the enzymatically macerated persimmon suspension. Moreover the mechanically macerated persimmon was greatly deteriorated after heat treatment at 10$0^{\circ}C$ for 60 min, whereas cells of the enzymatically separated persimmon suspension appeared to be stable, indicating increased thermal stability Thus, the PPase treatment of persimmon could be a better choice for preparation of highly valuable and functional processed food as well as for increase in preservation period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.255-264
• /
• 1989

The results of toxicity test using mice and rats for ethanol extract of Bracken Fern collected in Kwang Ju area were shown as follows ; Up to the dose of 10g per kg of mice administered intraperitoneally there was no lethal toxicity so that it was impossible to calculate the median lethal dose $(LD_{50})$. For the first 7 days experiment all rats administered frond extract grouping in 40mg, 400mg, and 1200mg per kg of rat as the daily oral doses did not show any characterized sign in the weight gain rate, anatomical findings, and biochemical studies. For 3 weeks following the first week the weight gain rates of all test group were reduced to $4.2{\sim}7%$ below the weight gain rate of control. In this period serum GPT, GOT, and Alkaline phosphatase value were increased significantly indicating the symptoms of Bracken Fern poisonings. The pathological findings of all test groups for 28 days showed acute and chronic intestinal lesion and liver damage with steatosis especially in 1200g/kg rat groups. In this experiment the Bracken poisonings appeared slowly in rats of 400mg/kg and 1200mg/kg for two weeks and in rats of 40mg/kg for 3 weeks, showing the symptoms of lowering of weight gain rate, subacute hepatitis, hepatic steatosis and enteritis in 28 days experiment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.191-201
• /
• 2016

A stochastic process has been used to develop a condition-based model for preventive maintenance of armor units of rubble-mound breakwaters that can make a decision the optimal interval at which some repair actions should be performed under the perfect maintenance. The proposed cost model in this paper based on renewal reward process can take account of the interest rate, also consider the unplanned maintenance cost which has been treated like a constant in the previous studies to be a time-dependent random variable. A function for the unplanned maintenance cost has been mathematically proposed so that the cumulative damage, serviceability limit and importance of structure can be taken into account, by which a age-based maintenance can be extended to a condition-based maintenance straightforwardly. The coefficients involved in the function can also be properly estimated using a method expressed in this paper. Two stochastic processes, Wiener process and gamma process have been applied to armor stones of rubble-mound breakwaters. By evaluating the expected total cost rate as a function of time for various serviceability limits, interest rates and importances of structure, the optimal period of preventive maintenance can easily determined through the minimization of the expected total cost rate. For a fixed serviceability limit, it shows that the optimal period has been delayed while the interest rate increases, so that the expected total cost rate has become lower. In addition, the gamma process tends to estimate the optimal period more conservatively than the Wiener process. Finally, it is found that the more crucial the level of importance of structure becomes, the more often preventive maintenances should be carried out.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.791-796
• /
• 2007

As large-scale buildings, skyscrapers, and multi-purpose buildings recently increase in numbers dramatically, the internal space of such buildings becomes more and more large and complicated accordingly. Since such structures usually accommodate a number of random people, the potential possibilities of disastrous tragedies are high, and the rates of injury and physical damage caused by the complicated system of the building also increase as well. However, most of the shelter designs of the existing buildings are based on the specifications according to the assigned laws and involved regulations. In this case, only general criteria are referred to regardless of the characteristics of each structure while other disaster-related features are not taken into consideration sufficiently. Since any actual fire may cause a terrible calamity, in such plans, shelter inducement can be neither safe nor effective. Thus, this study examines and analyzes currently run disaster prevention systems and shelter inducement facilities with COEX Mall as its subject, and analyzes the responding system to each situation based on the fire scenarios by means of As-Is Model. Through this analysis, presented are the measures to solve the problems of current disaster prevention systems and to improve shelter inducement methods effectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.