• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.493-509
• /
• 1998

Osteoarthritis(degenerative joint disease), the most common arthropathy affecting the aged people, is characterized by degeneration of articular cartilage with proliferation and remodeling of subchondral bone. Osteoarthritis of the knee, which probably has greater social cost and more associated disability than osteoarthritis of any other joint, prevalence is known to increase with age, and females have higher rates than males; radiographic abnormalities are present in more than 30% of persons more than 65 years old, with approximately 40% of these persons symptomatic. Though the etiology of osteoarthritis is not entirely understood, much information is available regarding risk factors for the development of knee osteoarthritis that permit some reasonable guideline for preventive strategies. Traumatic damage or occupational or recreational overuse of knee joint may result in osteoarthritis, and obesity also is related to osteoarthritis of the knee. A variety of other possible risk factors for the development of knee osteoarthritis have been proposed, including increased bone mass, smoking, diseases such as diabetes or elevated serum uric acid, and some metabolic factors, but the contribustions of these and other factors such as smoking or race and diseases such as diabetes are as yet undetermined. The usual clinical manifestations include pain, stiffnesss, crepitus and loss of function. In oriental medicine, osteoarthritis of the knee is very similar to diseases such as Bijung(痺症), Haksulpung(鶴膝風), Youkjeolpung(歷節風) in symptoms. The diseases such as Bijung(痺症), Haksuipung(鶴膝風), Youkjeolpung(歷節風) is related to the of function liver(肝) and kidney(腎) and risk factors are regarded as Pung(風), Han(寒), sub(濕). The diagnosis of osteoarthritis of the knee has often been based on radiographic appearance and clinical manifestations. The acupuncture therapy of osteoarthritis of the knee has often been based on Stomach meridian(ST), Spleen meridian(SP), Kidney meridian(KI), Liver meridian(LR).

• The Korean Journal of Malacology
• /
• v.31 no.3
• /
• pp.179-186
• /
• 2015

The Pacific oyster Crassostrea gigas oocytes were exposed to 4 cryoprotectants, dimethyl sulfoxide (DMSO), ethylene glycol (EG), methanol, or polyethylene glycol (PEG), each with 4 four concentrations (5, 10, 15, and 20%) and for 10, 20, 30 or 40 minutes for permeation. The oocytes were then fertilized, using normal sperm of the species. Fertilization and hatching rates were clearly influenced by cryoprotectant species and their concentration and permeation time. Overall, they decreased as concentrations and permeation time of cryoprotectants increased with optimum results at concentrations of 5-10% and a permeation time of 10 minutes. Larval abnormalities, a sign of the chemical damage, were a representative phenotype which was higher at a higher concentration and longer duration of the chemicals. In conclusion, best result was from 5% DMSO exposure for 10-20 minute permeation.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• Archives of Craniofacial Surgery
• /
• v.21 no.1
• /
• pp.27-34
• /
• 2020

Background: Free-flap reconstruction for recurrent head and neck cancer may be challenging depending on the previous treatments, those are, chemotherapy, radiotherapy, and surgery, including neck dissection or free tissue transfer. Specifically, the previous treatment could compromise the neck vessels, thereby making free-flap reconstruction more difficult. This study aimed to investigate the correlation between previous treatments and vascular compromise of the free flap. Methods: In this retrospective study, 124 free-flap reconstructions in 116 patients for recurrent head and neck cancer between 1993 and 2017 were investigated. The demographic characteristics, previous treatments, flap choices, infections, recipient vessels, and vascular crises were evaluated. Results: Of the 124 reconstruction cases, 10 had vascular crises. There were six revisions, totaling six flap failures. The success rate of free-flap reconstruction for recurrent cancer was 95.2%, which significantly differed from that for primary cancer (98.8%, p= 0.006). Moreover, in the recurrent cancer group, no correlation was found between previous treatments and vascular crises (p> 0.05). Increased rates of contralateral or uncommon anastomoses were found following neck dissection (p< 0.05). Conclusion: Previous neck dissection or radiotherapy could lead to scarring and tissue damage, which could in turn make microvascular reconstruction more challenging; however, the effect was not definite in this study. Approximately 60% of patients with previous neck dissection had compromised ipsilateral recipient vessels, which resulted in contralateral or uncommon anastomoses. In this study, free-flap reconstruction seems to be quite safe and preferable in patients with recurrent head and neck cancer based on the overall survival rate.

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.18-31
• /
• 2014

In this study, the spatio-temporal patterns of salty wind by typhoon in Jeju Island and their damages to windbreak forests are examined. To investigate these patterns, field trips as well as analyses of meteorological data were conducted after the attack of typhoon BOLAVEN in late August, 2012. Collected data show that salty wind damage in windbreak trees by the typhoon was distinct in the southern and eastern coastal areas due to the southeasterly gusts with less precipitation. Most of trees including Japanese cedar (Cryptomeria japonica) within 8km from the coast as well as pine trees (Pinus thunbergii) along the coasts were damaged by salty water driven by the typhoon, but the magnitude of its damages and recovery rates of damaged vegetation varied by species. These results indicate that prediction and proactive activities for salty wind are needed to reduce its damages to local vegetation particularly before the arrival of a dry typhoon accompanying gusty wind.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.5
• /
• pp.969-973
• /
• 2009

Samul-tang (SMT), which was firstly described in (Hwajegukbang) Song dynasty, is well known remedy for blood diseases in Oriental medicine. SMT is traditional herbal-remedy composed of Rehmanniae Radix Preparat, Angelicae Gigantis Radix, Cnidii Rhizoma and Paeoniae Radix. Recently, SMT has known to have anti-oxidative action. However, the reports on anti-oxidantic action in neuroglial cells are rare. In addition, the exact mechanisms are unclear. For these reasons, we investigated the protective effects of SMT on cell death induced by oxidative stress using C6 glioma cells. In our results, SMT accelerated proliferation rates of C6 cells in vitro. In addition, levels of LDH release induced by oxidative stress were lowered by treatment with SMT. Finally, protective effects on cell death induced by chemicals such as paraquat and rotenone were observed. In conclusion, these results suggest the possibility to protect brain cell or neuronal cell from damage induced by oxidative stress.

• Advances in Energy Research
• /
• v.2 no.1
• /
• pp.1-9
• /
• 2014

The green microalgae Chlamydomonas reinhardtti is well-known specie in the terms of $H_2$ production by photo fermentation and has been studying for a long time. Although the $H_2$ production yield is promising; there are some bottlenecks to enhance the yield and efficiency to focus on a well-designed, sustainable production and also scaling up for further studies. D1 protein of photosystem II (PSII) plays an important role in photosystem damage repair and related to $H_2$ production. Because Chlamydomonas is the model algae and the genetic basis is well-studied; metabolic engineering tools are intended to use for enhanced production. Mutations are focused on D1 protein which aims long-lasting hydrogen production by blocking the PSII repair system thus $O_2$ sensitive hydrogenases catalysis hydrogen production for a longer period of time under anaerobic and sulfur deprived conditions. Chlamydomonas CC124 as control strain and D1 mutant strains(D240, D239-40 and D240-41)are cultured photomixotrophically at $80{\mu}mol\;photons\;m^{-2}s^{-1}$, by two sides. Cells are grown in TAP medium as aerobic stage for culture growth; in logarithmic phase cells are transferred from aerobic to an anaerobic and sulfur deprived TAP- S medium and 12 mg/L initial chlorophyll content for $H_2$ production which is monitored by the water columns and later detected by Gas Chromatography. Total produced hydrogen was $82{\pm}10$, $180{\pm}20$, $196{\pm}20$, $290{\pm}30mL$ for CC124, D240, D239-40, D240-41, respectively. $H_2$ production rates for mutant strains was $1.3{\pm}0.5mL/L.h$ meanwhile CC124 showed 2-3 fold lower rate as $0.57{\pm}0.2mL/L.h$. Hydrogen production period was $5{\pm}2days$ for CC124 and mutants showed a longer production time for $9{\pm}2days$. It is seen from the results that $H_2$ productions for mutant strains have a significant effect in terms of productivity, yield and production time.

• Journal of Trauma and Injury
• /
• v.30 no.1
• /
• pp.6-11
• /
• 2017

Purpose: The establishment of the trauma system has changed the quality of trauma care in many countries. As one of the first designated level I trauma centers in Korea, we hypothesized that there were changes in laparotomy patterns and subsequent survival rates after the center was established. Methods: This was a 5-year retrospective study of all severe hemoperitoneum patients who were transfused with more than 10 units of packed red blood cells (RBCs) within 24 h of hospitalization. Variables related to trauma were collected throughout the study period, and the patients admitted before (period 1) and after (period 2) the establishment of a trauma center were compared. Results: Forty-five patients were managed from January 2009 to March 2015. The baseline patient characteristics of the two groups, including age, Injury Severity Score, blood pressure, and hemoglobin levels, were similar. The time to the operating room (OR) was $144.3{\pm}51.5$ min (period 1) and $79.9{\pm}44.1$ min (period 2) (p<0.0001). Damage control surgery (DCS) was performed in 17% of patients during period 1 and in 73% during period 2. The number of actual survivors (n=10) was higher than expected (n=8) in period 2. Conclusion: This is the first study analyzing the impact of a trauma center on the management of specific injuries, such as severe hemoperitoneum, in patients in Korea. During the study, the time to OR was shortened and DCS was used to a greater extent as a surgical procedure.

• Journal of Environmental Health Sciences
• /
• v.36 no.4
• /
• pp.337-341
• /
• 2010

The modified simultaneous differential staining technique, which enables double staining of cartilage and bones, needs to be improved to prevent soft tissues from being damaged during the staining process. Key factors influencing the extent to which soft tissues are damaged include the fixative used, macerating time, potassium hydroxide concentration, incubation temperature and the removal of skin from specimens. Here we describe a protocol that enables the hardening of tissues during bleaching and maceration. We also describe a method for objectively measuring rates of cartilage and bone growth. The use of formalin as a fixative rendered soft tissues more rigid due to the resulting chemical bonds formed between proteins. Blotted specimens were immersed in 1% potassium hydroxide (KOH) and incubated at $37^{\circ}C$ for 1 day (smaller specimens) or 2-3 days (larger specimens). The 1% KOH solution was also used as the diluent solution for the subsequent immersion in a graded series of 30%, 50%, 70%, 90%, 100% glycerol solutions, a procedure that made soft tissues even more transparent and hardened. It was not necessary to remove the skin of specimens shorter than 2 cm, since the macerating solution could easily penetrate their thin skin layer and continuously remove those pigments hindering visibility. Since excessive osmosis is another factor that can damage soft tissues in the macerating process by causing the rupture of those cells not able to withstand the osmotic pressure, here it was minimized by balancing the salt concentration between the interior and exterior of cells with the addition of 0.9% sodium chloride (NaCl) in the macerating solution. Finally, to determine the proportions of cartilage and bone growth, photographs of the stained specimens were taken with a dissecting microscope and sections corresponding to the cartilage and bones were cut out from the printed pictures and weighed. Our results show that this method is suitable for the objective evaluation of bone and cartilage growth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.823-828
• /
• 2013

To reduce the cost per watt of photovoltaic power, it is important to reduce the cell thickness of crystalline silicon solar cells. As the thickness of the silicon layer is reduced, two distinctive thermal expansion rates between the silicon and the aluminum layer induce bowing in a solar cell. With a thinner silicon layer, the bowing distance grows exponentially. Excessive bowing could damage the silicon wafer. In this study, we tried to measure an irregularly curved silicon solar cell more accurately using a 3D image scanner. For the detailed analysis of the three-dimensional bowing shape, a least square fit was applied to the point data from the scanned image. It has been found that the bowing distance and shape distortion increase with a decrease in the thickness of the silicon layer. An Ag strip on top of the silicon layer can reduce the bowing distance.