• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.542-552
• /
• 2018

In this paper, the precast method of a concrete eco-pillar debris barrier was proposed to improve the construct ability and economic efficiency. The performance was validated by experimental and structural analysis. The steel debris barrier has a high construction cost and causes environmental damage with corrosion. The construction of a concrete eco-pillar debris barrier has been increased recently. On the other hand, there are no design standards regarding debris barriers in Korea, and debris barriers are being designed by the experience and sense of engineers. Therefore, in this study, a method to determine the design external forces was proposed and the design was performed by applying a hollow cross-section to the debris barrier. In addition, three types of connection methods of a concrete cantilever column with the maximum bending moment acts were proposed, and validation of the performance of each type was performed with a real-scale experiment. The experimental results showed that the type with loop reinforcement had the highest rigidity and the type with anchorage performance exceeded the maximum bending moment according to the ultimate load. In the manufacturing procedure of mock-up debris barriers, the type with an anchorage-bar was found to have superior construct ability.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.83-91
• /
• 2009

It is very difficult to export the fresh agricultural products to long distance countries such as USA and EU without any damage. Fresh products exporting would overcome very severe conditions such as hot and cold weather changes, heavy vibrations with rolling and pitching during the target distribution period, therefore, the packaging needs the immobility of products in the container and the keeping its quality by packaging materials or methods under any surrounding environments, especially. The physical strength of outer box should be designated according to its own characteristics for agricultural product packaging. Packaging dimension which would be fit to standard pallet is also very important factor to reduce the distribution cost. There have been many agricultural products researches for export packaging to the USA so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength and optimum dimension of corrugated fiberboard box which would be used to USA export packaging of fresh melon as well as Japan.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.1
• /
• pp.103-111
• /
• 2011

Objectives : This study of oral health problems was conducted to 311 students in Special Schools in order to inquire into the state of their oral health behaviors, to find out the main obstacles against dental services, to secure dental reasonable basis for oral health promotion. Methods : A questionnaire survey was conducted in the Special School of the 311 students in the area of the metropolitan Seoul. By means of Chi-squared test and Fisher's exact test, oral hygiene habits for each type of the subjects, the contents of dental care services, the prerequisites to improve oral health, were inquired. To evaluate the effects to the current oral health status of types of disability, 2-way ANOVA was practiced. Results : The handicapped with Visual impairment, mental retardation, multiplicity with disabilities, answered negatively in their own oral health status. 47.4% of the deaf can do brush for theirselves without the inconvenience, but in other types of disability they showed that they were helped by others. Subjects did not use the secondary oral hygiene necessaries because, except brain damage, almost of types of disability impeded the convenient use. 60 to 88.2 percent of the total respondents were the recent visitors to dental clinique within 1 year, and the most common motives of the visiting dentist, is a routine medical examination, their movements to the dentist in all types of disabilities, needed helps of others. Most of them received medical treatment at a private dentist, the handicapped preferred the private care and place(49.8%). Only in the case of the brain disorders, extremely much of the disabled answered that they were needed the preventive treatment, and the another cases of disability were largely needed the treatment of the decayed teeth. To improve the oral health of the people with disabilities, at the opening of the clinics and hospitals over a certain size, the mandatory medical facilities for the care of the disabled should be preceded and followed by the improvement of dental insurance system so as to reduce the burdens of the cost of dental care. Conclusions : The improvement of oral health policy for the disabled are needed inevitably: Development of secondary oral hygienic easy to use for the disabled, the building systems of medical dental hospital with the disabled facilities, by the improvement of the insurance system, the reduction of the burden of payments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.417-422
• /
• 2017

One of the most frightening aspects of weapons of mass destruction (WMD) is their ability to cause death in very small quantities without being visible to the public. The military authorities are making considerable effort to ensure the survivability of the combatants in the event of NBC(Nuclear, Biological and Chemical) contamination. Therefore, in this study, modules were developed for the measurement of the positive pressure and for the detection of the chemicals used for the control of the various shut-off valves used in an NBC shelter. In addition, a high performance gas tight shut-off valve was developed that can overcome the disadvantages associated with manual manufacturing, such as the occurrence of defective products and high manufacturing cost. By applying the positive pressure measurement and chemical detection modules, this valve was able to be used to control the facility. The developed gas-tight shut-off valve maintained airtight characteristics at a pressure loss of 28[Pa] at the prescribed wind velocity and an internal pressure of 30[kPa]. It is expected to be possible to control the gas-tight shut-off valve through the remote measurement of the positive pressure, thereby ensuring the foreign independence of import substitution and defense related technology in the future. In addition, by installing these valves in all of the intake ports or exhaust ports connected to the outside of the NBC shelter, it is possible to prevent the damage resulting from the rapid inflow of the storm pressure caused by conventional weapons and nuclear explosions, thereby protecting the people and equipment in the shelter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.725-730
• /
• 2017

The strength ratio of the main structures of buildings gradually increasing, due to the advances made in analysis and cost saving techniques. In this study, to examine the stability of industry buildings using sandwich panels as roof assemblies, we examine the changes in the moment strength ratio of the main structures caused by increasing the roof load. This study adopts the PEB structure and three H-steel structure as the structural analysis models. In the case where the additional load exceeds about 11% of the roof design load, the strength ratio exceeds 1 for the main structure. In the case where the additional load exceeds about 36%(of the roof design load), the working moment exceeds the plastic moments, which leads to major damage to the structure. This study compares 1) the maximum load according to the purlin spaces, 2) the maximum load by KS, and 3) the maximum load calculated from the test results of the manufacturer.The maximum bearing load of the panels determined by all three methods exceeds the structure failure threshold load of the main structure. This study provides evidence that an unexpected increase in the roof load might cause the whole structure to collapse, due to the failure of the main structural members, before the failure of the roof assemblies. Therefore, information on the structural performance of the sandwich panels is required for the structural design, and the sandwich panels should be considered to be an integral part of the overall structural design.

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.418-426
• /
• 2006

In the artificial heart application, productivity and hemodynamic properties of artificial heart valves are crucial in successiful application to long term in vivo trials. This paper is about manufacture and assessment of trileaflet polymer heart valves using vacuum forming process(VFP). The VFP has many advantages such as reduced fabrication time, reproducibility due to relatively easy and simple process for manufacturing. Prior to VFP of trileaflet polymer heart valves, polyurethane(Pellethane 2363 80AE, Dow Chemical) sheet was prepared by extrusion. The sheets were heated and formed to mold shape by vacuum pressure. The vacuum formed trileaflet polymer heart valves fabrication is composed of two step method, first, leaflet forming and second, conduit forming. This two-step forming process made the leaflet-conduit bonding stable with any organic solvents. Hydrodynamic properties and hemocompatibility of the vacuum formed trileaflet polymer heart valves was compared with sorin bicarbon bileaflet heart valve. The percent effective orifice area of vacuum formed trileaflet polymer heart valves was inferior to bileaflet heart valve, but the increase of plasma free hemoglobin level which reflect blood damage was superior in vacuum formed trileaflet polymer heart valves Vacuum formed trileaflet polymer heart valves has high productivity, and superior hemodynamic property than bileaflet heart valves. Low manufacturing cost and blood compatible trileaflet polymer heart valves shows the advantages of vacuum forming process, and these results give feasibility in in vivo animal trials in near future, and the clinical artificial heart development program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.584-594
• /
• 2016

This research empirically analyzes, from an ecological perspective, whether socio-economic factors of the regions in which the elderly live have any actual influence on thoughts of suicide on the part of the elderly. Microscopic data either included outliers in part of the variables, including income and other variables of that type, from among source data from investigations into actual conditions of the elderly in 2014. Regarding macroscopic data, the indices that represent social and economic situations in each region, which were provided by KOSIS, were selected. Regarding the method of analysis, hierarchical or multi-level analysis models were applied by considering special hierarchical characteristics and heterogeneity at the personal and regional levels. The analyses showed that the following had statistically significant influences: 1. the cost-of-living index and the national basic supply and demand rate of the region; 2. the extent of natural disaster damage; and 3. the number of leisure and welfare facilities for the elderly, compared to the elderly population. Based on the results, proposals are made for systematic and practical endeavors in the community.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.51-59
• /
• 2011

Tensile stress occurs and random crack develops in concrete pavement slab when it contracts by variation of temperature and humidity. The tensile stress decreases and the random crack is minimized by sawcutting the slab and inducing the crack with regular spacing. The random crack, joint damage, decrease of load transfer efficiency are caused by too wide joint spacing while too narrow joint spacing leads to increase of construction cost and decrease of comfort. A mechanistic-empirical joint spacing design method for the concrete pavement was developed in this study. Structurally and environmentally weakest sections were found among the sections showing good performance, and design strengths were determined by finite element analysis on the sections. The joint width for which the load transfer efficiency is suddenly lowered was determined as allowable joint with referring to existing research results. The maximum joint spacing for which the maximum tensile stress calculated by the finite element analysis did not exceed the design strength were found. And the maximum joint width expected by the maximum joint spacing were compared to the allowable joint width. The new method developed in this study was applied to two zones of Hamyang-Woolsan Expressway being designed. The same joint spacing as a test section constructed by 8.0m of joint spacing wider than usual was calculated by the design method. Very low cracking measured at 6 years after opening of the test section verified the design method developed in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.376-392
• /
• 2020

In Korea, damages to wooden cultural properties by termites have been reported all over the country, including Ulleungdo Island and Jeju Island. In order to reduce the damage caused by termites, most cultural properties damaged by them are treated with fumigation or drug treatment on the soil to kill or repel them. The number of treatments is decreasing due to cost and safety problems, and new methods needed to cope with this situation. After extracting an enzyme by selecting only worker termites from the termites collected in Shinan, Jeonnam, as a result of measuring the enzyme activity using xylan of cellulose and hemicellulose that are the components of wood, the activity of termite intestinal enzymes in xylan was higher than that of cellulose having a high molecular weight. Therefore, in this study, as a result of exploring over 600 species of medicinal plant extracts that inhibit the activity of termite intestinal enzymes using xylan as a substrate, the inhibitory effect was significant in Borneolum Syntheticum, Ephedra sinica, and Menthol. Selected Borneolum Syntheticum, Ephedra sinica, and Menthol's extracts not only inhibited the activity of termite intestinal enzymes, but also confirmed that they have insecticidal activation and inhibitory effects on feeding in the result of the direct treatment.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.59-73
• /
• 2007

The compensation system in industrial accident insurance is systemized with "either receiving all or no benefits at all" according to "admited or denied as an industrial accident". Therefore, they are centered on the decision as "industrial accident" or "non-industrial accident", but judging between the two is very complicated, and has inherent conflicting factors. In the early stage of industrialization, industrial accident compensation was based on the indemnity liability for employer's faults. In order to be compensated any damage, the injured worker should prove that the accident was not due to his or her faults. However it was very difficult for injured worker or his or her family to prove the employer's faults, so it was almost impossible to get compensation. Thereafter industrialization progress and improvement of workers' political status lead to conversion from principle of liability with employer's faults to principle of liability without employer's faults. In addition to that, coverage of industrial accident compensation was also expanded. This improvement strengthened the benefit payment principle of "All or Nothing". Even though the "All or Nothing" principle provokes tremendous criticism, the reason why it's difficult for industrialized countries to adopt partial compensation system, is that partial compensation system worsens the administrative hardship, therefore industrialized countries overcome the restrictions of the "All or Nothing" principle with making balance in provisions for any risk to some extent. However, in Korea because the general compensation system for covering medical cost and income loss from accidents, is not equipped, it could be possible to cause acute conflicts with regard to coverage of industrial accidents. Therefore it is required to improve the industrial accident insurance with the acceptance of the significance and logic of discriminated compensation, and create the integrated compensation system in the long run.