• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.182-185
• /
• 2010

$Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{0.9}Ti_{0.1}]_{0.98}Nb_{0.02}O_3$ (PNZST) thin films were deposited by radio frequency magnetron sputtering on a $(La_{0.5}Sr_{0.5})CoO_3$ (LSCO)/Pt/Ti/$SiO_2$/Si substrate using a PNZST target with an excess PbO of 10 mole%. The thin films deposited at the substrate temperature of $500^{\circ}C$ crystallized to a perovskite phase after rapid thermal annealing (RTA). The thin films, which annealed at $650^{\circ}C$ for 10 seconds in air, exhibited good crystal structures and ferroelectric properties. The remanent polarization and coercive field of the fabricated PNZST capacitor were approximately $20uC/cm^2$ and 50 kV/cm, respectively. The reduction of the polarization after $2.2\;{\times}\;10^9$ switching cycles was less than 10%.

• Journal of Astronomy and Space Sciences
• /
• 제35권1호
• /
• pp.19-30
• /
• 2018

The analysis of the high-resolution spectra of 31 Magellanic Clouds Cepheid variables enabled the identification of thorium lines. The abundances of thorium were found with spectrum synthesis method. The calculated thorium abundances exhibit correlations with the abundances of other chemical elements and atmospheric parameters of the program stars. These correlations are similar for both Clouds. The correlations of iron abundances of thorium, europium, neodymium, and yttrium relative to the pulsational periods are different in the Large Magellanic Cloud (LMC) and the Small Magellanic Cloud (SMC), namely the correlations are negative for LMC and positive or close to zero for SMC. One of the possible explanations can be the higher activity of nucleosynthesis in SMC with respect to LMC in the recent several hundred million years.

• Journal of Astronomy and Space Sciences
• /
• 제35권1호
• /
• pp.1-6
• /
• 2018

The reanalysis of the previously published abundance pattern of mild barium star HD202109 (${\zeta}$ Cyg) and the chemical compositions of 129 thin disk barium stars facilitated the search for possible correlations of different stellar parameters with second ionization potentials of chemical elements. Results show that three valuable correlations exist in the atmospheres of barium stars. The first is the relationship between relative abundances and second ionization potentials. The second is the age dependence of mean correlation coefficients of relative abundances vs. second ionization potentials, and the third one is the changes in correlation coefficients of relative abundances vs. second ionization potentials as a function of stellar spatial velocities and overabundances of s-process elements. These findings demonstrate the possibility of hydrogen and helium accretion from the interstellar medium on the atmospheres of barium stars.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1003-1005
• /
• 2000

The switched reluctance drive provides a good adjustable steed characteristics like a D.C series motor. However, because of the torque production mechanism, it also has some disadvantage such as higher torque ripple and fluctuation in speed. To reduce torque ripple and to control speed precisely at low condition current level technique is adopted. The SRM drive with current control of invariable frequency and phase swichting control has good speed regulation characteristics. Digital control system with an 80c196kc micro-controller is used to realize this drive system. Test results show that the control system has the goof ability to achive precise speed control at low speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.117-119
• /
• 2004

To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of carbon black. We could know EEA was excellent more than other specimens from above experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.223-224
• /
• 2007

In this paper, we investigated resistant immunity of semiconductive shield materials in power cables' ordinary operation temperature. It used EEA(Ethylene Ethyl Acrylate) in base polymer and measured TGA(Thermal Gravimetric Analysis) in controlling contents. It increased pyrolysis temperature in content increasement of CNT(Carbon Nanotubes). As a result, we knew superiority that CNT:CB is 10:0.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1343-1344
• /
• 2007

In this paper, we investigated mechanical characteristics about thermal properties in semiconductor layer of power cables. Method of specimen making used solution mixing and Tensometer 2000 of Alpha used for measurement of stress and strain. Semiconductor layer made an experiment on separately environmental temperature$[25^{\circ}C]$ and high temperature$[90^{\circ}C]$ which running temperature$[90^{\circ}C]$ of cables exposed. As a result, specimen of applicable DFS(Dual Filler System) could know mechanical superiority that its structural characteristics reinforcement considered thermal characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-139
• /
• 2001

This paper describes a new methods of detecting rotor position in SRM(switched reluctance motor). The Conventional method of position sensorless control for SRM is measuring phase current and pulse voltage applied in unexcited phase. The estimation of rotor position based on the detection of inductance by pulse current. Implementation is via low-cost electronic circuits with DSP320F241. Test results show that this technique is a possible approach to detect the rotor position of an SRM.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.79-84
• /
• 2013

The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.

• 센서학회지
• /
• 제11권6호
• /
• pp.358-364
• /
• 2002

본 논문에서는 백금박막 온도센서의 $0^{\circ}C$, $100{\Omega}$ 세팅을 위해 355nm 파장을 갖는 자외선 레이저를 이용하였다. 국제적으로 온도센서의 A-class 기준오차는 $0^{\circ}C$에서 ${\pm}0.060{\Omega}$이다. 실제적으로 이 값은 $0.15^{\circ}C$이하에 해당하는 오차로 저항체 제작시 고정밀 가공 기술을 필요로 한다. 가공에 이용된 355nm DYP(Diode-Pumped YAG) 레이저는 power : 37mW, rep rate 주파수 : 200Hz 그리고 bite size : $7.5{\mu}m$에서 $1{\sim}1.5{\mu}m$ 두께의 백금박막을 가장 안전하게 가공할 수 있었으며, 가공선폭은 $10{\mu}m$ 안팎임을 확인하였다. 그리고 사진식각 공정기술을 이용하여 제작된 $2"{\times}2"$ 기판내의 96개(4 by 24) 저항체는 상온 $25^{\circ}C$에서 $79{\sim}90{\Omega}$ : 42.7%, $91{\sim}102{\Omega}$ : 57.3%의 비율로 각각 제작되어졌다. $109.73{\Omega}$를 목표 값으로 $25^{\circ}C$에서 자외선 레이저를 이용하여 가공한 결과, 82.3%가 가공오차가 ${\pm}0.03{\Omega}$이하에 들어왔으며 나머지 17.7%도 국제규격 A-Class내인 ${\pm}0.06{\Omega}$내에 포함되었다.