• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.107-114
• /
• 2009

In the recent large block are used to build the ship to improve productivity. For this reason, two or more floating cranes that are connected in parallel is the trend. Typically, when working with floating crane load safety factor is considered. Even in the parallel operation, load safety factor is calculated similar to working alone. For this reason, operations do not guarantee the reliability or excessive safety factor applied. Therefore, the subdivided cases for calculating the safety factor are defined when parallel connected floating cranes are operated. Based on those cases, the operation standard is made about procedure using parallel connected floating cranes. And to verify this, dynamics simulation was performed for verification using the dynamics simulation program.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.155-160
• /
• 2005

In this paper, the channel decoder promising reliable data retrieving in noisy holographic channel has been developed for holographic WORM(write once read many) system. It covers various DSP(digital signal processing) blocks, such as align mark detector, adaptive channel equalizer, modulation decoder and ECC(error correction code) decoder. The specific schemes of DSP are designed to reduce the effect of noises in holographic WORM(H-WORM) system, particularly in prototype of DAEWOO electronics(DEPROTO). For real time data retrieving, the channel decoder is redesigned for FPGA(field programmable gate array) based hardware, where DSP blocks calculate in parallel sense with memory buffers between blocks and controllers for driving peripherals of FPGA. As an input source of the experiments, MPEG2 TS(transport stream) data was used and recorded to DEPROTO system. During retrieving, the CCD(charge coupled device), capturing device of DEPROTO, detects retrieved images and transmits signals of them to the FPGA of hardware channel decoder. Finally, the output data stream of the channel decoder was transferred to the MPEG decoding board for monitoring video signals. The experimental results showed the error corrected BER(bit error rate) of less than $10^{-9}$, from the raw BER of DEPROTO, about $10^{-3}$. With the developed hardware channel decoder, the real-time video demonstration was possible during the experiments. The operating clock of the FPGA was 60 MHz, of which speed was capable of decoding up to 120 mega channel bits per sec.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.222-235
• /
• 2015

The purpose of this study is to suggest guidelines for riser fatigue analysis in terms of selection of reasonable analysis method. Three analysis methods (spectral, regular wave, rain-flow counting) are introduced and compared. As the riser systems give non-linear response, the time-domain analysis method is more preferred than frequency-domain analysis method. The spectral fatigue analysis method, however, is still useful for identifying fatigue prone areas. Once stress RAO is established, fatigue damage can be calculated very quickly. The regular wave method and the rain-flow counting method are more time consuming but give more exact results compare to spectral method. In case of regular wave method, a set of regular waves which represent random sea states is considered for dynamic analysis. The rain-flow counting method is the most intuitive and exact method because it refers time history stresses containing most of non-linear effects of the riser system. However, it is not common for early design stage to use rain-flow counting method because of its high cost. In this study, it was confirmed that the regular wave method is the most cost effective way in specific cases. However, if the system is highly non-linear, it seems that the regular wave method gives less accurate results than rain-flow counting method. Therefore, it is imperative that the engineers select appropriate analysis method based on design stage and given engineering period. This paper also discusses the theoretical background of each calculation method and hydrodynamic aspects of marine riser systems. A steel catenary riser (SCR) line on FPSO was considered and marine dynamic program (OrcaFlex) was used for static and dynamic analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.127-134
• /
• 2016

This paper presents practical issues for test and evaluation(T&E) methods to develop defense systems. Our argument is motivated by several domestic defense cases and the cases lead us to discuss two main factors for reliable defense systems development: 1) statistical approaches and 2) technical schemes. Specifically, statistical approaches enable to provide credible interpretations about T&E results in the decision-making process. With practical T&E results of the “Red Shark” torpedo, we performed statistical hypothesis tests and suggest a minimum sample size to accept the hypothesis. Next, technical schemes have more direct effects on improving reliability of developed defense systems and we shortly introduce tools development for systems verification that is required to integrate several sub-systems, e.g., combat, sensor, weapon, and communication systems, within a defense system. We additionally summary some domain cases using modeling and simulation techniques for successful T&E. In closing, we expect that the paper shows empirical investigation and lessons learned with these two practical issues, which provides a guide those who desire to make decisions about reliable defense systems development.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.293-298
• /
• 1999

본 논문은 수중음의 안정적 실시간 인식을 위한 새로운 음원 인식 알고리즘을 다루고 있다 본 논문에서 이용된 주파수인식 알고리즘은 크게 네 부분으로 구성되어 있는데 1)입력된 음파 신호를 duty cycle $50\%$의 디지털 신호로 바꾸고 기준 주파수의 음원을 duty cycle $50\%$, 위상차 0도 90도 180도 270도의 디지털 신호를 생성하는 부분, 2)입력된 음파신호를 4가지 위상의 각 기준신호와 배타적 논리합을 구하는 부분, 3)두 번째에서 만들어진 각 신호를 적분회로에 통과시키는 부분, 4)세 번째에서 발생한 각 신호중 최대값을 추출하여 입력된 음파신호의 주파수를 인식하는 부분으로 이루어져 있다. 이 회로에 대한 수치 해석을 통하여 각 부분의 특성치에 대한 최적 값 및 성능을 검증하였으며, 이의 결과를 각각 computer 수치 시험, 실제 회로 실험과 비교하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.58-64
• /
• 2015

There are a lot of different types of noise from construction site and it depends on construction stage, equipment type and number of operating equipments. The problem is that the almost noise from construction site is high level and some kinds of noise levels are over 100 dB. In addition, if construction site is located in downtown, there are a few options to reduce noise level. Therefore several site mitigation plans were developed to reduce different types of construction noises such as breaker work, gang form and asphalt saw. They were applied in site and evaluated noise reduction performance. The test result of site insertion loss was between 4~8 dB depends on the equipment and type of work.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.654-655
• /
• 2008

In order to investigate the availability of tire airborne noise for vehicle road noise development, We measured the noise in condition of smooth road and coarse road. The correlation coefficient was analyzed using the articulation index of the tire airborne noise and the vehicle road noise. It has been found that the correlation between the tire airborne noise and the vehicle road noise is positively strong.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.612-616
• /
• 2007

This paper describes a procedure to improve road noise using DPDS estimation. We can estimate a body local stiffness at chassis mounting point where the path of road input vibration by DPDS with experiment and FE simulation. DPDS result from FE model has a good correlation with experiment data. FE model DPDS shows weak points among chassis mounting points. Body panel thickness and shape were changed to meet DPDS target. Improved DPDS of critical points makes a road noise level lower.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.385-386
• /
• 2008

Dynamic stability of the vehicle rearview mirror is an important factor for the driver's visual perception (image blur) when driving down the road and regarded as one of the vehicle level N&V performance of visible component vibration. Several projects within GM identified a set of objective metrics and validation methods that can replace current existing subjective evaluation of mirror stability. This paper presents objective evaluation results for assessing dynamic stability (angle of rotation) of the vehicle rearview mirrors using both in-lab FRF measurements and on-road testing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.387-388
• /
• 2008

Finding reasonable flexural modes from the full vehicle modal testing has always been a difficult job to N&V engineers due to FRF inconsistency, nonlinearity, heavy damping and, in many cases, interactions between global body structural modes and massive isolate/non-isolated subsystem modes. This paper provides a brier overview of the mode map validation using single-run FRF measurement with highly sensitive accelerometers fur the full vehicle modal analysis and then it can be used to characterize the vehicle's global/local vibration performances, especially customer perceived "structural feel" typically below 40Hz.