• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.165-168
• /
• 2004

We have analyzed the cause of black "mura" and measured it in prism light-guide plate (LGP). Properties of components used in a back light. unit (BLU) have changed by Simulation Tool. We get major factor of black "mura" for improvement in prism LGP. For the improvement of black "mura", removal of brightness "mura" at input light part must precede preferentially because of reflection characteristics of the prism LGP. Removal of brightness "mura" is improved by changing of input light part in LGP and dispersion treatment.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.85-95
• /
• 2007

It compared subcontractor with contractor that are wages, the labor hour and labor condition of the work environment back are inferior relative. The subcontractor which basically the contract workers evade the dangerous process or the difficult work, the dirty work back what is called 3D the case which does to keep a business is many. so With life it will be threatened consequent health directly. The possibility where the subcontractor will be exposed to danger work came to be high. Together the reason of subcontract at managing the big business the case which becomes accomplished in objective, about lower the immediacy safety&health problem, subcontractor assigned workers is the actual condition only it could not be deteriorated more in public finance of the supply and enterprise and technical ability insufficiency. Consequently it prevents the subcontract which danger work is insensitive from this research and immediacy of the subcontract workers who is weak hygiene circumstance complement the plan it will be able to secure the immediacy safety&health subcontract workers, substantially to prepare in the hazard subcontract proprietor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.31-36
• /
• 2008

Sheet metal forming has some merits that are less loss of materials in process, less time-consuming and it makes mass product possible. The product produced by sheet metal forming process has high strength compared to the weight and better surface characteristics. Therefore, sheet metal forming process is a lot used in automobiles, aircrafts, electronics and appliances. This paper made the process design for forming Bracket Front Back Frame Lower, determined the blank shape and size using PAM-STAMP, commercial software and evaluated formability. It has been proved that the optimal blank through the result forming analysis has advantage in terms of formability and spring back compared to the rectangular blank.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1014-1015
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct at-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.2
• /
• pp.140-142
• /
• 2010

Acupuncture appears to be a clinically effective treatment for acute and chronic pain. A considerable amount of research has been conducted to evaluate the role that acupuncture plays in pain suppression; however, few studies have been conducted to evaluate the side effects of the acupuncture procedure. This case report describes a suspected postdural puncture headache following acupuncture for lower back pain. Considering the high opening pressure, cerebrospinal fluid leakage, and the patient's history of acupuncture in the lower back area, our diagnosis was iatrogenic postdural puncture headache. Full relief of the headache was achieved after administration of an epidural blood patch.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.110-115
• /
• 2008

In this paper, we have designated a 42-inch RGB LED BLU, 80 % above illuminance. A desirable brightness performance was attained, by doing anti-parallel configuration, a fitting of LED's strip distance and a height of the top of LED to the back of the LCD. We get the 85.81 % of the brightness uniformity which has 12.8 mm away from LED's top and LCD's back and 51.41 mm of the same spacing between LED's strip in simulation and 82.24 % in experiment.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.2
• /
• pp.35-43
• /
• 2009

Purpose : The purpose of this study was to measure the change of strength of trunk flexion and extension on abdominal and back muscles. Methods : Each taping group 1(n=14), taping group 2(n=14), taping group 3(n=14) and control group(n=15) were measured a muscle strength by Biodex at first test, second test, third test and forth test in 3 days. Results : The strength of trunk flexion and extension was significantly different among the experimental groups (p<.05). It also shows that significant increasing of muscle strength at 48 hours after application of taping (p<.05). Conclusion : In conclusion, we were found that taping technique base on taping type show immediately assistance of muscle strength and enduring effect for 48 hours.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.134-140
• /
• 2013

This paper proposes a new design of rotor shape of Interior Permanent Magnet Synchronous Motor (IPMSM) used for agricultural electric vehicle (AEV). The distribution of the residual magnetic flux density at the air gap is modified by rotor surface shape and V-type magnet angle. As a result, cogging torque and physical characteristic have been improved, and back electromotive force (back-EMF) of the suggested model has been improved to be closest to sine wave form compared to initial model. The validity of the proposed rotor shape optimization is confirmed by the manufactured IPM rotor core and measured the performance of the cogging torque.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.1
• /
• pp.21-26
• /
• 2006

This paper deals with the dynamic analysis and experiments of moving-magnet linear actuator with/without spring. On the basis of two dimensional (2-D) analytical solutions and experiments, control parameters such as thrust constant, back-emf constant, inductance and resistance are obtained. And then, dynamic simulation algorithm is established from the voltage and motion equation. Finally, for various values of frequency, dynamic simulation results for characteristics of current and displacement of moving-magnet linear actuator with and without spring are presented and confirmed through the experiments. In particular, This paper applies the PWM voltage waveform obtained from a DSP for bidirectional voltage drive to the actuator.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1069-1070
• /
• 2007

In this paper, a new stator shape for axial flux motor was proposed. It consists of tooth and back-yoke laminated and be assembled with each other. The method assembling together has a significant characteristic. It is different direction of lamination between core and back-yoke. This paper shows analysis method considering the lamination direction and analyze characteristic of axial flux motor with stator proposed using 3D finite element method.