• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.234-238
• /
• 2003

In this work, we have designed a fully integrated 2.4GHz LC-tuned voltage-controlled oscillator (VCO) with multiple tuning inputs for a $0.25-{\mu}m$ standard CMOS Process. The design of voltage-controlled oscillator is based on an LC-resonator with a spiral inductor of octagonal type and pMOS-varactors. Only two metal layer have been used in the designed inductor. The frequency tuning is achieved by using parallel pMOS transistors as varactors and back-gate tuned pMOS transistors in an active region. Coarse tuning is achieved by using 3-bit pMOS-varactors and fine tuning is performed by using back-gate tuned pMOS transistors in the active region. When 3-bit digital and analog inputs are applied to the designed circuits, voltage-controlled oscillator shows the tuning feature of frequency range between 2.3 GHz and 2.64 GHz. At the power supply voltage of 2.5 V, phase noise is -128dBc/Hz at 3MHz offset from the carrier, Total power dissipation is 7.5 mW.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.256-259
• /
• 1996

Epidural adhesiolysis is a convenient and safe method for the management of back pain. However, we experienced a case where a patient developed sensory change to S2 area after epidural adhesiolysis. Male patient, 43 years old, was admitted to our pain clinic for epidural adhesiolysis for back pain. Patient was experiencing pain radiating to left thigh, and sensory change and motor disturbance to the S1 area. Patient's symptoms and signs were much improved on the first day of epidural adhesiolysis. Patient, however, complained of numbness of perineal and S2 areas after the next day of injections. We postulated the cause of this complication was due to: compression of nerve root by the large volume of injectate and hematoma, and the side effect of local anesthetic, hypertonic saline and steroid.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.21-25
• /
• 2014

The texturing is one of the most important processes for high efficiency crystalline silicon solar cells. The rear side flatness of silicon solar cell is very important for increasing the light reflectance and forming uniform back surface field(BSF) region in manufacturing high efficiency crystalline silicon solar cells. We investigated texturing difference between front and rear side of wafer by texturing of two adhered wafers. As a result, the flatter rear side was obtained by forming less pyramid size compared to the front side and improved reflectance of long wavelength and back surface field(BSF) region were also achieved. Therefore, the texturing of two adhered wafers can be expected to improve the efficiency of silicon solar cells due to increased short circuit current(Isc).

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.32-36
• /
• 2003

In this work, we have designed a fully integrated 2.4GHz LC-tuned voltage-controlled oscillator (VCO) with multiple tuning inputs for a 0.25-$\mu\textrm{m}$ standard CMOS process. The design of voltage-controlled oscillator is based on an LC-resonator with a spiral inductor of octagonal type and pMOS-varactors. Only two metal layer have been used in the designed inductor. The frequency tuning is achieved by using parallel pMOS transistors as varactors and back-gate tuned pMOS transistors in an active region. Coarse tuning is achieved by using 3-bit pMOS-varactors and fine tuning is performed by using back-gate tuned pMOS transistors in the active region. When 3-bit digital and analog inputs are applied to the designed circuits, voltage-controlled oscillator shows the tuning feature of frequency range between 2.3 GHz and 2.64 GHz. At the power supply voltage of 2.5 V, phase noise is -128dBc/Hz at 3MHz offset from the carrier. Total power dissipation is 7.5 mW.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.2
• /
• pp.98-103
• /
• 2010

In order to develop two-stroke free-piston hydrogen engine to obtain high thermal efficiency and low emission, backfire occurrence have to be prevented. In this research, backfire characteristics are analyzed as functions of the intake valve opening timing and compression chamber pressure under piston by using RICEM (Rapid Intake Compression Expansion Machine) that has reverse uni-flow scavenging. As the result, reverse uni-flow scavenging is advantage about back fire. but, it exists suitable intake valve opening timing and its timing become known that equivalence ratio 1 retard until the piston rises. Also, To rise chamber pressure of lower piston, this does not cause backfire occurs in equivalent ratio 0.6 observed back fire. Therefore, 2cycle hydrogen fueled free-piston engine is undesirable scavenging compression by compressing the piston.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.2
• /
• pp.103-108
• /
• 2012

Recently, as the prevalence of high-performance mobile devices and the application of the multimedia content are expanded, Super Resolution (SR) technique which reconstructs low resolution images to high resolution images is becoming important. And in the mobile devices, the development of the SR algorithm considering the operation quantity or memory is required because of using the restricted resources. In this paper, we propose a new single frame fast SR technique suitable for mobile devices. In order to prevent color distortion, we change RGB color domain to HSV color domain and process the brightness information V (Value) considering the characteristics of human visual perception. First, the low resolution image is enlarged by the improved fast back projection considering the noise elimination. And at the same time, the reliable edge map is extracted by using the LoG (Laplacian of Gaussian) filtering. Finally, the high definition picture is reconstructed by using the edge information and the improved back projection result. The proposed technique removes effectually the unnatural artefact which is generated during the super resolution restoration, and the edge information which can be lost is amended and emphasized. The experimental results indicate that the proposed algorithm provides better performance than conventional back projection and interpolation methods.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.4
• /
• pp.283-290
• /
• 2018

The aim of the study was to investigate the effect of Korean medicine treatments on pain reduction of thoracolumbar compression fracture patients. We analysed 48 patients who have been diagnosed as thoracolumbar compression fracture on Computed Tomography(CT) or Magnetic Resonance Imaging(MRI) scan and had admitted to Dunsan Korean Medical hospital from January 1,2014 to April 4, 2017. The analysis was conducted as retrospective study which analyzes patient's medical records. Statistical analysis was performed using the IBM SPSS statistics 24 program. We used Visual Analog Scale(VAS) and pain reduction scale to evaluate pain reduction of patients. The result showed that there were statistically significant pain reduction on thoracolumbar compression fracture patients treated with korean medicine treatments. In conclusion, we found that the korean medicine treatments showed positive effect on pain reduction of thoracolumbar compression fracture patients.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.267-269
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.6
• /
• pp.655-658
• /
• 2016

Parkinson's disease (PD) patients frequently have several spinal deformities leading to postural instabilities including camptocormia, myopathy-induced postural deformity, Pisa syndrome, and progressive degeneration, all of which adversely affect daily life activities. To improve these postural deformities and relieve the related neurologic symptoms, patients often undergo spinal instrumentation surgery. Due to progressive degenerative changes related to PD itself and other complicating factors, patients and surgeons are faced with instrument failure-related complications, which can ultimately result in multiple revision surgeries yielding various postoperative complications and morbidities. Here, we report a representative case of a 70-year-old PD patient with flat back syndrome who had undergone several revision surgeries, including anterior and posterior decompression and fusion for a lumbosacral spinal deformity. The patient ultimately benefitted from a relatively short segment fixation and corrective fusion surgery.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4E
• /
• pp.9-13
• /
• 1996

We developed an iterative algorithm which could improve the resolution of reconstructed tomograms having random attenuation patterns and analyzed the limitation of this algorithm. The simple back-and forth propagation algorithm has depth resolution about four wavelengths. An iterative algorithm, based on back-and-forth propagation, can be used to improve the resolution of reconstructed tomograms. We analyzed the wavefield for multi-layered specimen and programmed iterative algorithm using Clanguage. Simulation results show that the images get clearer as the number of iterations increases. Also, unambiguous images can be reconstructed using this algorithm even when the layer separation is only two wavelengths. However, this iteration algorithm comes up with an incorrect solution for the number of projections less than five.