• 제목/요약/키워드: DVB-S3

검색결과 73건 처리시간 0.021초

분산 다중 안테나 지상파 방송 시스템을 위한 프레임 동기화 방법 (Frame Synchronization Method for Distributed MIMO Terrestrial Broadcasting Systems)

  • 옥규순;강인웅;김영민;서재현;김흥묵;김형남
    • 한국통신학회논문지
    • /
    • 제41권4호
    • /
    • pp.424-432
    • /
    • 2016
  • 세계 주요 국가에서는 차세대 지상파 방송을 위해서 한정된 주파수 자원으로 전송량을 크게 높일 수 있는 MIMO(multiple-input multiple-output) 기술을 적용한 MIMO-OFDM 기반 지상파 방송 시스템의 개발 및 표준화를 활발하게 진행하고 있다. 특히, 공간상으로 떨어져 있는 송신 안테나를 사용하는 분산 다중 안테나 시스템에서는 각 안테나에서 전송한 신호가 수신 안테나로 다른 시간에 도착할 수 있고, 이와 같은 환경을 고려한 프레임 동기화 연구는 아직 활발하게 진행되지 않았다. 따라서, 본 논문에서는 두 개의 분산 송신 안테나로부터 전송되는 신호가 수신 안테나로 시간 간격을 두고 도착할 때 각 신호의 도착 시간을 탐지하기 위해 널 심볼을 삽입하는 방법을 제안한다. 프리앰블 이전에 널 심볼을 삽입하게 되면 두 송신 안테나에서 전송하는 신호를 수신기에서 구별해낼 수 있기 때문에 각 프레임의 시작 지점을 찾을 수 있다. 500 샘플 이하의 수신 차이가 날 때는 기존의 방법보다 우수한 성능을 보이는 것을 모의실험을 통해 확인하였다.

Novel Solid Phase Extraction Procedure for Some Trace Elements in Various Samples Prior to Their Determinations by FAAS

  • Sacmaci, Srife;Kartal, Senol;Sacmaci, Mustafa;Soykan, Cengiz
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권2호
    • /
    • pp.444-450
    • /
    • 2011
  • A novel method that utilizes poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] as a solid-phase extractant was developed for simultaneous preconcentration of trace Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) prior to the measurement by flame atomic absorpiton spectrometry (FAAS). Experimental conditions for effective adsorption of the metal ions were optimized using column procedures. The optimum pH value for the simultaneously separation of the metal ions on the new adsorbent was 2.5. Effects of concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of the analytes were investigated. A high preconcentration factor, 100, and low relative standard deviation values, $\leq$1.5% (n = 10), were obtained. The detection limits (${\mu}gL^{-1}$) based on the 3s criterion were 0.18 for Cd(II), 0.11 for Co(II), 0.07 for Cr(III), 0.12 for Cu(II), 0.18 for Fe(III), 0.67 for Mn(II), 0.13 for Ni(II), 0.06 for Pb(II), and 0.09 for Zn(II). The validation of the procedure was performed by the analysis of two certified reference materials. The presented method was applied to the determination of the analytes in various environmental samples with satisfactory results.

Solid phase microextraction-gas chromatograph/pulsed flame photometric detector(SPME-GC/PFPD)와 static headspace-gas chromatograph/pulsed flame photometric detector(SH-GC/PEPD)를 이용한 황 함유 화합물들의 분석 방법 비교 (Comparison of Solid Phase Microextraction-Gas Chromatograph/Pulsed Flame Photometric Detector (SPME-GC/PFPD) and Static Headspace-Gas Chromatograph/Pulsed Flame Photometric Detector (SH-GC/PEPD) for the Analysis of Sulfur-Containing Compounds)

  • 양지연;김영석
    • 한국식품과학회지
    • /
    • 제37권5호
    • /
    • pp.695-701
    • /
    • 2005
  • 각각의 황 함유 화합물의 표준곡선을 그렸을 때, linear range의 범위는 $10^2$부터 $10^4$까지의 범위를 보였다. Dimethyl trisulfide가 가장 작은 limit of detection(LOD) 값과 가장 넓은 linear range $(10^4)$를 보이는 반면, methional은 가장 큰 LOD 값과 가장 좁은 linear range$(10^2)$를 가졌다. 각 황 함유 화학물의 분자구조와 PFPD의 황 함유 화합물 분석 원칙에 영향을 받는 것으로 사료된다. 서로 다른 세 종류의 fiber를 사용시, 미세 고체상 추출법(SPME)을 사용했을 때, CAR/PDMS fiber는 가장 좋은 추출 효율을 보였고, 반대로 PDMS/DVB fiber는 가장 낮은 효율을 나타내었다. SPME 방법을 사용하면, 시료에 포함되어 있는 6개의 황 함유 화합물들 중, 최대 5개까지 분석이 가능하였다. 그러나 본 실험에서 사용하지 않은 황 함유 화합물들도 다수 동정 되었는데, 이렇게 추출과정 중 artifacts로 생성된 황 함유 화합물들은 분석 시 오차를 작용할 수 있다. 고정상 기체추출법(SH)은 SPME와 비교했을 때 더 적은 수의 황 함유 화합물을 감지해냈다. SPME와 비교 시 SH의 추출 효율은 낮았지만, artifact로 생성되는 화합물의 수는 적었다.