• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1272-1285
• /
• 2018

The paper presents a novel embedded multifunctional media sever (EMMS) for mobile devices to receive various media programs. Being different from other contemporary system research, the paper mainly studies how to design a reception solution for terrestrial digital television (DTV) on mobile devices and how to enable mobile devices can receive DTV program, enjoy video-on-demand (VOD), achieve video surveillance and relay Internet video program via local Wi-Fi simultaneously. In the system design, we integrate broadcasting-terrestrial DTV tuner, streaming media re-transmission system, VOD disk, video camera and access interface to the Internet into EMMS, which can either receive terrestrial DTV radio signals and demodulate out digital transport stream (TS), or can read streaming media bit-stream from VOD disk, surveillance camera or access interface to the Internet. The experimental results show the proposed system is stable and quality-efficient. Comparing with the other systems, the proposed system has the least packet loss rate and response time.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.488-500
• /
• 2009

In this paper, we study on making a use of value-added services using DTV closed caption data. Note that Closed-Captioning service helps to bridge "digital divide" through extending broadcasting accessibility of a neglected class such as hearing-impaired person and foreigner. In Korea, DTV Closed Captioning standard was developed in June 2007, and Closed Captioning service should be provided by an enforcing law in all broadcasting services in April 2008. Here, we describe the method of extracting a caption data from MPEG-2 Transport Stream of ATSC-based digital TV signal and generating a caption file using the extracted caption data and time information. In addition, we present the segmentation method of broadcasting content using caption file. Experimental results show that implemented S/W tool provides the feasibility of the proposed methods and the usability of closed caption for a variety of data application service.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.215-220
• /
• 2002

In this paper, the 100 watt unit ower amplifier using temperature independent biasing for DTV (Digital Television) repeater application is designed and fabricated. The DC operation point of this unit power amplifier at temperature variation from $20^{\circ}C$ to $100^{\circ}C$ is fixed by active bias circuit. The variation of current consumption in the 100 watt unit power amplifier has an excellent characteristics of less than 0.6A. The implemented unit power amplifier has the gain over 12dB, the gain flatness of less than 0.5dB and input and output return, loss of than 15dB over the DTV repeater frequency range (470~806MHz). This unit power amplifier yields intermodulation distortion(IMD) of more than 32dBc at 2MHz offset, which satisfies the IMD at output power of 100 watt (50dBm).

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.436-449
• /
• 2016

This paper compares the transport overhead of MMT (MPEG Media Transport) with that of MPEG-2 TS (Transport Stream). MPEG-2 TS is globally used in multiplexing compressed audio and video data in digital broadcast industry, including areas of DTV (Digital Television), IPTV (Internet Protocol Television), and DMB (Digital Multimedia Broadcasting). It was the early 1990s when MPEG-2 TS standard was established. After more than two decades of years since its first establishment, many parts of MPEG-2 TS turned out to be inappropriate to today's broadcast and communication environment. Given the situations, in 2014 MPEG (ISO/IEC JTC 1 SC 29/WG 11) standardized MMT as the next-generation multimedia transport standard hopefully that can replace MPEG-2 TS. In this paper, with assumptions of broadcast service scenarios we applied both MMT and MPEG-2 TS to each scenario and we calculated their transport overheads. We used a software program that counts the transport overhead, which was developed in our laboratory for this paper. And we conducted a comparative analysis based on the calculated result of transport overhead.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.438-449
• /
• 2009

To analyze reception environments of ATSC Digital TV, CIR (Channel Impulse Response) analysis systems are widely applied. The receiving performances of conventional CIR analysis systems are not as good as those of commercial state-of-the-art receivers. There are difficulties in measuring and analyzing reception problems caused by multi-path interferences. To solve these problems, commercial DTV chip sets embedded CIR analysis system is proposed. Generally, commercial chip sets provide baseband (In-phase) channel data and field or segment sync data. For more precise analysis of measured I channel data, it is necessary to extract Q (quadrature) channel data components as well. This paper presents the technical requirements of CIR analysis system for DTV. In order to satisfy such requirements and measure more accurate magnitude and phase of CIR, a method to derive the quadrature data from the measured in-phase channel data is proposed. The proposed channel analysis system is implemented with a commercial DTV chip set and expedites the data analysis for use on DTV field test vehicles. Computer simulation and laboratory test results are provided to demonstrate the performance of the proposed channel analysis system.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2013

Recently, the digital television transition from analog television to digital television has been progressing in terrestrial broadcasting. As a result of the DTV transition, additional reassignments and deployments of TV White spaces (TVWS) caused by co-channel interference (CCI) were needed. In this paper, we investigate the TVWS caused by CCI using Longley-Rice and ITU-R P.1546 propagation model, which are the most widely-used propagation model. In addition, we analyze the service coverage radius and CCI radius according to the height of transmitter antenna and transmitting power. The results show that the ratios of CCI radius to service coverage radius in Longley-Rice and ITU-R P.1546 propagation model are about 2.54 and 2.07, respectively.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.309-311
• /
• 2006

This paper describes a digital video recorder-based approach to realising interactive programmes on digital television. So far, it is very difficult that the most interactive programmes included the vast quantities of the content, whatever it is data or HD-ready broadcasting, are broadcasted on digital television via the set-top box. Furthermore it is not possible to envisage until IPTV was appeared. Even though IPTV makes possible for streaming the interactive services via broadband, it is not easy to receive tremendous contents for interactivity as set-top box at once. In this paper it will suggest an effective solution to resolve the download dilemma for the interactive services on DTV by employing the set-top box fitted with digital video recorder.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.104-107
• /
• 2000

We designed and implemented the RFIC(RF front-end IC) for DTV(Digital TV) tuner. The DTV tuner RF front-end consists of low noise IF amplifier fur the amplification of 900 MHz RF signal and down conversion mixer for the RF signal to 44MHz IF conversion. The RFIC is implemented on ETRI 0.8u high resistive (2㎘ -cm) and evaluated by on wafer, packaged chip test. The gain and IIP3 of IF amplifier are 15㏈ and -6.6㏈m respectively. For the down conversion mixer gain and IIP3 are 13㏈ and -6.5㏈m. Operating voltage of the IF amplifier and the down mixer is 5V, current consumption are 13㎃ and 26㎃ respectively.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.168-174
• /
• 2012

In Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) systems, additional very low-rate data can be transmitted by modulating the amplitude and polarity of the transmitter identification (TxID) signal. Although the additional data transmission scheme offers reliable transmission and has a very large coverage area, it has a limitation on the data rate. In this paper, we propose a novel additional data transmission scheme based on the TxID sequences of the ATSC DTV system and Walsh modulation. The proposed scheme not only increases the data rate significantly, but also offers a virtually identical coverage area compared to a conventional scheme.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.309-312
• /
• 2000

최근에 국내에서도 DTV 시험방송을 하고 있고 고해상도의 DTV 수상기도 개발되고 있다. DTV 수상기는 기본적인 TV 기능에 다양한 멀티미디어 기능을 더해 멀티미디어 단말기로서 역할을 할 것으로 기대된다. 이러한 DTV 수상기가 다양한 멀티미디어 인터페이스를 갖도록 하는 것은 기본 요구 사항이 될 것이다. 이중에 최근에 널리 보급되고 있는 디지털 카메라의 출력을 DTV 수상기를 이용하여 디스플레이 하는 것은 필수적인 기능이라 할 수 있다. 이러한 정지영상을 DTV 수상기에 디스플레이 하는 기능은 DTV set-top에서 Monitor를 통한 OSD(On Screen Display)에 적용할 수 있다. 따라서 본 논문에서는 JPEG 포맷의 정지영상 파일을 MPEG-2와 호환되는 파일로 변환하여 DTV 수상기에 출력하는 시스템을 개발하였다 Windows 환경에서GUI(Graphic User Interface)를 통해 JPEG Image를 디코딩 하여 영상의 픽셀 정보를 복원한 후에 다시 MPEG-2로 압축하여Transport Stream으로 변환하고. 이 stream을 PCI Card를 이용하여 VSB modulator의 요구 타이밍에 맞추어 LVDS 레벨로 출력하도록 하였다.