• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.43-44
• /
• 2009

Fabrics for Digital Textile Printing (DTP) are different from it of general textile printing. It is necessary to pre-treatment of chemical agents for desired quality. But this process does not correspond with simplification of DTP processing. In this research, we pre-treated of cotto is necessary to pre-treatment of chemical agents for desired quality. But this process does not correspond with simplification of DTP processing. In this research, we pre-treated of cotton fabric for DTP by atmosphere plasma treatment and we understood that pre-treatment of fabric by atmosphere plasma treatment was more simple DTP process.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.697-702
• /
• 2007

마찰 마모에 대한 트라이볼로지 특성은 표면 재질에 대하여 중대한 영향을 끼친다. 더욱이 자동차의 가혹한 운전조건하에서의 엔진오일의 경우 내스커핑성과 시져는 트라이볼로지 특성에 상당히 중요하다. 본 연구에서는 펠렉스 마찰 마모시험기를 이용 첨가제들을 자동차 엔진오일에 널리 쓰이는 윤활기유에 첨가하여 트라이볼로지 특성을 연구하였다. 연구결과 다음과 같은 결론을 얻었다. 엔진오일에 표면거칠기의 특성을 가진 인산염(Phosphate)을 첨가하면 낮은 온도에서 우수하고, ZnDTP와 Ca-phenate를 첨가했을 때 높은 하중에서 내마모성, 극압성이 월등히 뛰어나며, ZnDTP와 P를 첨가했을 때는 높은 온도에서도 안정적으로 온도특성 또한 우수하였다.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.

• 복식
• /
• 제59권6호
• /
• pp.106-117
• /
• 2009

The purpose of this study is to present a new vision for high value-added knit wear design by designing and producing knitted one-piece dress by digital textile printing which based on digital making a new industry, culture, and lifestyle in a new millenium. According as casual fashion is more and more popular, preferring knit wear, a key item of casual fashion, continues to increases. Therefore it is important to study knit wear design practically, try a new technique, and represent creative designs. As a method of the study, visual and textural data were investigated for theory of knit and DTP and a variety of knit design samples were illustrated Especially, to perform a study based on the industry, this researcher worked and experienced at J fashion Ltd., knit wear promotion company. Firstly, the theory of DTP was investigated and then 3 knitted one-pieces were designed and produced. The concept of design was digital geometry which represented chic and modern image in digital age. Target was city adult group from the late teens to the late twenties and keeping open mind and active lifestyle and enjoying the activity and unique characteristics of knit wear. This study has developed knitted one-piece design by DTP technique which has been generally applied to woven fabric. This is of great significant in opening a new way of high value-added knit wear design.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.78-88
• /
• 1994

For the study of chemical and mechanical properties of the synthetic and mineral oil added with two different Zn-DTPs, base and formulated oils were analyzed and compared. Kinematic viscosity and total acid number (TAN) were tested at high temperature for formulated oils. Also the oils added with different alkyl groups of Zn-DTP were tested for thermal stability and TAN changes. The 4-ball machine was used to test for the mechanical properties, such as the coefficient of friction and wear. The worn areas after sliding test were analyzed with microscope and EDX, too. From the study, mineral and synthetic oil have different effects according to the various added ratio of the primary and secondary alkyl groups of Zn-DTP. Also the temperature of test oil affected the anti-wear and friction property of the formulated oils. For synthetic oil, the primery alkyl group of Zn-DTP made better friction properties than that of secondary, while, for mineral oil, secondary alkyt group was better only at low temperature for mineral oil.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.580-581
• /
• 2006

본 연구의 목적은 DTP 폐수를 나노여과막으로 여과하여 처리하는 공정에서 발생하는 농축수를 처리하는 공정의 개발에 있다. 특히 DTP 장치의 특성상 발생 폐수를 별도의 폐수처리장으로 수집, 이동 하지 않고 현장에서 처리하는 소규모 패키지 시스템을 개발하고자 하였다. 아런 목표를 달성하기 위해 효율적인 여과공정인 나노여과를 적용하였고, 이 때 발생하는 농축수는 오존이나 과산화수소와 같은 산화제를 이용하여 일부 처리하고 나머지는 감압농축 및 감량화를 농한 농축수 관리 방안을 연구 하였다.