• 전자공학회논문지S
• /
• 제34S권4호
• /
• pp.1-11
• /
• 1997

In this paper, modeling of the communication channel occupancy characteristics at the base station in the wide area radio trunking syste has been performed. Using the results, mathematical analysis for the switching capacity at the network switch has also been done. Specificatlly, we propose a G/M/m queueing model for the single service area modeling, and analyze changes in call blockingprobabilities accoridng to changes in the burstness characteristics of group paging calls. As a result, we have observe dthat the channel occupancy variations become larger as the burstness characteristics become more apparent, to make the call blocking probability higher. Next, based on the single service area analysis, we have anayzed mathematically the average switching capacity required to serve mobile subscribers for a wide area radio trunking sytem, where multiple switching port assignments are required when the people in the same group are distributed over several base stations. Accordingly, we have observed that the average and the variance of switching channel occupancy are closely related to the mobility characteristics of subscribers, and that we need a netowrk switch having bigger capacity as subscribers show wider distribution. Especially, with the call dropping probability within 0.2%, a switch having about 5 to 6 times bigger can be required, compared with the one when the mobility of subscribers is mostly restricte dto a single service area.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.345-349
• /
• 2006

SAPO-34 촉매상에서 DME(dimethyl ether) 또는 메탄올로부터 경질 올레핀(에틸렌, 프로필렌, 부텐)을 제조하는 반응을 수행하여, 각각의 올레핀들과 CO, $CO_2$와 같은 부 생성물의 수율을 반응온도와 시간의 흐름에 따라 비교해서 관찰하였다. DME 전환반응은 메탄올 전환반응과 비교하여 볼 때 촉매의 비활성화가 급격히 진행되었다. 물을 첨가할 경우, 올레핀의 수율을 증가와 함께 코크 생성에 의한 촉매의 비활성화가 감소하여 촉매의 수명이 길어짐을 확인하였다.

• 공업화학
• /
• 제34권5호
• /
• pp.548-555
• /
• 2023

SAPO-34 catalysts were modified with polyethylene glycol (PEG) and Pb to improve their catalytic lifetime and selectivity for light olefins in the conversion of dimethyl ether to olefins (DTO). Hierarchical SAPO-34 catalysts and PbAPSO-34 catalysts were synthesized according to changes in the molecular weight of PEG (M.W. = 1000, 2000, 4000) and the molar ratio of Pb/Al (Pb/Al = 0.0015, 0.0025, 0.0035), respectively. By introducing PEG into the SAPO-34 catalyst crystals, an enhanced volume of mesopores and reduced acidity were observed, resulting in improved catalytic performance. Pb was successfully substituted into the SAPO-34 catalyst frameworks, and an increased BET surface area and concentration of acid sites in the PbAPSO-34 catalysts were observed. In particular, the concentrations of the weak acid sites, which induce a mild reaction, were increased compared with the concentrations of strong acid sites. Then, the P2000-Pb(25)APSO-34 catalyst was prepared by simultaneously utilizing the synthesis conditions for the P2000 SAPO-34 and Pb(25)APSO-34 catalysts. The P2000-Pb(25)APSO-34 catalyst showed the best catalytic lifetime (183 min based on DME conversion > 90%), with an approximately 62% improvement compared to that of the unmodified catalyst (113 min).

• 한국진공학회지
• /
• 제2권4호
• /
• pp.439-454
• /
• 1993

The phase sequence of codeposited Co-Si alloy and Co/si multilayer thin film was investigated by differential scanning calormetry(DSC) and X-ray diffraction (XRD) analysis, The phase sequence in codeposition and codeposited amorphous Co-Si alloy thin film were CoSilongrightarrow Co2Si and those in Co/Si multilayer thin film were CoSilongrightarrowCo2Silongrightarrow and CoSilongrightarrowCo2Si longrightarrowCoSilongrightarrowCoSi2 with the atomic concentration ration of Co to Si layer being 2:1 and 1:2 respectively. The observed phase sequence was analyzed by the effectvie heat of formatin . The phase determining factor (PDF) considering structural facotr in addition to the effectvie heat of formation was used to explain the difference in the first crystalline phase between codeposition, codeposited amorphous Co-Si alloy thin film and Co/Si multilayer thin film. The crystallinity of Co-silicide deposited by multitarget bias cosputter deposition (MBCD) wasinvestigated as a funcion of deposition temperature and substrate bias voltage by transmission electron microscopy (TEM) and epitaxial CoSi2 layer was grown at $200^{\circ}C$ . Parameters, Ear, $\alpha$(As), were calculate dto quantitatively explain the low temperature epitaxial grpwth of CoSi2 layer. The phase sequence and crystallinity had a stronger dependence on the substrate bias voltage than on the deposition temperature due to the collisional daxcade mixing, in-situ cleannin g, and increase in the number of nucleation sites by ion bombardment of growing surface.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.64-72
• /
• 2004

The dryer (ten per unit) are operating to remove tritium in PHWR(Pressurized Heavy Water Reactor). There are coming out heavy water adsorbent from operating the dryer (95 drums for ten year per unit) The amount of radioactivity of heavy water adsorbent almost exceed ninety times more than disposal limit-in-itself showed by The Ministry of Science and Technology. It has to be disposed whole radioactive waste products, however there are problems of increase at the expense of their permanent disposal. In this research, We have studied how to remove kinds of nuclear materials and amount of tritium with in heavy water adsorbent. As the result we could develop disposal equipment and apply it. D20 adsorbent have to contain below Gamma nuclide O.3Bq/g and tritium 100Bq/g "The Regulation for disposal of the radioactivity wastes" showed by The Ministry of Science and Technology. There fore. So as to remove amount of tritium and kinds of nuclear materials (DTO) we needed a equipment. Also we have studied how to remove effectively radioactivity with in Adsorbent. As cleaning heavy water adsorbent and drying on each condition (temperature for drying and hours for cleaning). Because there is something to return heavy water adsorbent by removing impurities within adsorbent when it is dried o high temperature. After operating, we have been applying this research to the way to dispose heavy water adsorbent. Through this we could reduce solid waste products and the expense of permanent disposal of radioactive waste products and also we could contribute nuclear power plant run safely. According to the result we could keep the best condition of radiation safety super vision and we could help people believe in safety with Radioactivity wastes control for harmony with Environment.

• 대한본초학회지
• /
• 제30권3호
• /
• pp.69-76
• /
• 2015

Objectives : The effect of mixture extracted from Bupleuri Radix and Physalidis Herba(BR+RH) on the LPS-induced Depression in rats was investigated. Methods : Rats were administered intragastrically BR+PH after injectio of LPS to induce deprssion. Immobility was examined using Tail Suspension Test(TST), Forced Swimming Test(FST). The level of plasma corticosterone was measured by an Enzyme-Linked Immunosorbent Assay(ELISA) method. The expressions of c-Fos, Corticotropin Releasing Factor(CRF), NADPH-d in the Paraventricular nucleus(PVN) and TH in the Locus coeruleus(LC) were measured by immunohistochemical method. Results : In the effect of BR + PH on TST, immobility was significantly decreased comparing with the LPS group. In FST, immobility was shown decrease tendency in the BR+PH group. The expression of c-Fos in the PVN was significantly decreased at BR + PH400 group, comparing with the LPS group. The expression of CRF in PVN was shown dto have the decrease tendency in the BR+PH group, comparing with the LPS group. The expression of NADPH-d in PVN was not significantly decreased at BR+PH groups, comparing with the LPS group. The expression of TH in the LC was shown to have the decrease tendency at BR + RH groups, but not significantly, comparing with the LPS group. Conclusions : Anti-depressant effect of mixture after extracted from Bupleuri Radix and Physalidis Herba was through the anti-inflammatory effect via inhibition of HPA axis. NO and catecholamine system is not involved.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1999년도 Proceedings of the 17th Symposium on Plant Biology Environmental Stress and Photosynthesis
• /
• pp.55-67
• /
• 1999

A puc -deleted cell of Rhodobacter sphaeroides grows with a doubling time longer than 160 h under the light-limiting photoheterotrophic ( 3 Watts [W]/㎡) conditions due to an absence of the peripheral light-harvesting B800-850 complex. A spontaneous fast-growing mutant, R.sphaeroides SK101 was ioslate dto have∼40-h doubling at 3 Watts/㎡, while the growth of the mutant was not distinguished from its parental strain during both aerobic and light-saturating photoheterotrphic (10W/㎡) growth. The B875 complex of SK101 under the light-limiting conditions was elevated by 20 to 30% compared with that of the puc -deleted cell, reflecting parallel increase of bacteriochlorophyll and carotenoid contents of the mutant. The formation of B875 complex of SK101 under the anaerobic dark conditions with dimethylsulfoxide was the same as that of the puc-deleted cell. suggesting that the mutation of SK101 result in the altered control of B875 complex formation by light. When puc is restored in SK101 , it is not B875 complex but B800-850 complex which formation is elevated. The mutation of SK101 affected the bchF transcription most drastically to show two to tenfold increase during both aerobic and photoheterotrophic growth. The mutated phenotype of SK101 was complemented with pW2, which contains approximately 100-kb HNA of the photosynthetic gene clusters. The complementing DNA was narrowed down to a 1.1-kb DNA containing orfQ and pufKBA . The mutation of SK101 appeared to be exerted through the mutation of the orfQ gene encoding a putative bacteriochlorophyll -mobilizing protein.

• 대한방사선치료학회지
• /
• 제15권1호
• /
• pp.29-33
• /
• 2003

I. 목적 외부방사선 치료와 같이 근접치료 시에도 재현성을 평가하기 위해 bone의 위치와 tandem, ovoid 간의 거리를 측정하여 치료 setting의 재현성을 평가함으로써 자궁경부암 환자의 근접치료시 치료의 재현성을 평가하고자 하였다. II. 대상 및 방법 1999년부터 2001년 10월까지 본원을 내원해서 근접치료를 시행한 자궁경부암 환자중 tandem, ovoid을 사용한 52명을 대상으로 근접치료시 촬영한 film(환자1명당 3회촬영)을 가지고 측정하였다. Os을 기준으로 환자의 center축을 잡고 tandem, ovoid의 위치와 pubic symphysis, sacrum, coccyx등과의 거리를 각각 측정하여 치료 setting의 재현성을 평가하였다. III. 결과 환자 52명에 대한 tandem, ovoid의 위치와 pubic symphysis, sacrum, coccyx등과의 거리에 대한 표준 편차 결과는 다음과 같은 분포로 나타났다. 1) 각 tandem angle 의 표준편차는 $0^{\circ}{\sim}2.89^{\circ}$이다. 2) pubic symphysis에서 Os까지의 높이는 $0cm{\sim}0.79cm$ 3) sacrum에서 tandem tip까지의 거리는 $0cm{\sim}0.9cm$ 4) Os level에서 coccyx까지의 거리는 $0.06cm{\sim}0.76cm$ 5) ovoid tip에서 Os까지의 거리는 오른쪽은 $0cm{\sim}0.53cm$ 6) ovoid tip에서 Os까지의 거리는 왼쪽은 $0cm{\sim}0.45cm$ 7) 첫번째 source위치에서 ovoid사이의 거리는 $0cm{\sim}0.36cm$ 8) tandem에서 ovoid tip까지의 거리는 $0cm{\sim}0.31cm$ IV. 결론 자궁경부암 치료에 있어 근접치료는 중요한 치료 방법이다. 환자 치료간에 재현성을 평가해본 결과 대체로 만족 할 만한 수치를 보였으며 고선량율 근접치료에서 재현성 평가는 중요할 것이고 계속적으로 평가할 필요가 있을 것이다.

• 한국의학물리학회지:의학물리
• /
• 제25권4호
• /
• pp.233-241
• /
• 2014

본 연구에서는 $PRESAGE^{REU}$ 겔을 이용하여 방사선 치료계획 시 3차원 흡수선량 분포 검증을 위한 정도 관리 소프트웨어를 개발하여 겔을 이용한 3차원 선량분석 방법을 제시하고자 한다. 우선 치료계획상의 3차원 흡수선량 데이터와 측정한 겔 광학밀도 데이터의 입출력 기능을 구현하였고, 변환 테이블을 이용하여 광학밀도를 흡수선량으로 변환하는 기능을 구현하였다. 겔에서 측정된 흡수선량과 치료계획상의 흡수선량 분포간의 기하학적 매칭을 위하여 3D 볼륨 데이터의 x, y, z 방향 및 회전 변환을 구현하였다. 매칭이 완료된 두 선량 분포간에 일치도를 검증하기 위하여 3차원 감마 인덱스알고리듬을 구현하였고, 감마 통과 지도(gamma passing map) 기반의 일치도 확인 기능을 구현하였다. 광학밀도와 흡수선량간의 관계를 분석하기 위하여 원기둥 형태의 $PRESAGE^{REU}$ 겔을 대상으로 X-선 전산화 단층촬영기를 이용하여 CT 영상을 획득하였고, 방사선 치료계획 시스템(Eclipse, Varian, Palo Alto)을 이용하여 원반 형태의 6개의 가상 표적을 생성하여, 각각에 1 Gy에서 6 Gy까지 선량이 전달되도록 입체조형 방사선 치료계획을 수립하였다. 다음으로 광학 CT 스캐너($Vista^{TM}$, Modus Medical Devices Inc, Canada)를 이용하여 기준 투영 영상들을 획득하였고, 치료계획과 동일하게 겔에 방사선을 조사하였다. 조사2시간 후 매 2시간 간격으로 광학 CT 스캐너로 투영 영상 셋을 획득 후 3차원 광학밀도 데이터로 재구성하였다. 실린더 중심축을 따라 치료계획상의 흡수선량 프로파일과 광학밀도 프로파일을 추출하여 광학선량 대비 흡수선량 대응 테이블을 정의하였다. 이후 본 연구에서 개발한 소프트웨어를 이용하여 3차원상의 선량 분포의 일치도를 평가하였다. 광학밀도와 흡수선량간에는 supra-linear 관계가 나타났으며, 광학밀도는 그 크기에 따라 24시간당 60% 전후로 감쇄하였다. 측정된 흡수선량은 중심축 부근에서는 치료계획 선량과 잘 일치하였으나, 주변부로 갈수록 크게 낮아짐을 확인할 수 있었으며, 이로 인하여 3D 감마 통과율은 선량 차이율과 DtoA 각각 3%/3 mm의 조건하에 70.36%로 낮게 나타났다. 이러한 결과는 광학 CT 스캐너 내부의 오일과 $PRESAGE^{REU}$ 겔간의 굴절률이 정확하게 매칭되지 않아서 광학 스캔 시 빔이 굴절되어 부정확한 데이터를 만들어 내는 것으로 분석되었다. 본 연구에서 개발한 정도 관리소프트웨어는 3차원 겔 선량을 비교 분석하기에 유효한 것으로 평가되었으나, $PRESAGE^{REU}$ 겔로부터 정확한 흡수선량데이터를 획득하기 위해 겔 선량측정 과정의 많은 개선이 요구된다.