• 한국경영과학회지
• /
• 제38권2호
• /
• pp.43-63
• /
• 2013

Remanufacturing is a process of recovering end-of-life products into serviceable parts for producing new products. Due to the limited supply of recovery cores to remanufacture, a remanufacturing firm also needs to produce or procure new parts for fulfilling the demand. This paper is targeted for solving the problem of determining the optimal amount of newly produced and remanufacturing parts, which is called production and remanufacturing planning (PRP) problem, under uncertain supply of recovery cores. The new production mitigates the risk of insufficient core supply while it takes more costs than the remanufacturing. The PRP model in this paper also considers disassemble-to-order (DTO) environment, in which multiple kinds of parts are remanufactured from multiple products on order of the parts. Whereas existing studies presents only heuristic solutions for DTO remanufacturing, this paper provides an exact solution for this problem and analytical sensitivity of the involved cost parameters, adopting multi-dimensional newsvendor modeling and stochastic linear programming techniques. The result shows that production and remanufacturing plans for multiple products are mutually dependent, and a change of cost parameters involved in only one part is propagated to all other parts.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.77-82
• /
• 2008

This paper presents a Reliability-Based Topology Optimization(RBTO) using the Evolutionary Structural Optimization(ESO). An actual design involves some uncertain conditions such as material property, operational load and dimensional variation. The Deterministic Topology Optimization(DTO) is obtained without considering the uncertainties related to the uncertainty parameters. However, the RBTO can consider the uncertainty variables because it has the probabilistic constraints. In order to determine whether the probabilistic constraints are satisfied or not, simulation techniques and approximation methods are developed. In this paper, the reliability index approach(RIA) is adopted to evaluate the probabilistic constraints. In order to apply the ESO method to the RBTO, sensitivity number is defined as the change in the reliability index due to the removal of the ith element. Numerical examples are presented to compare the DTO with the RBTO.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.232-239
• /
• 2011

DME has received much attention because of its possible use as a fuel and a chemical feedstock. Chemical conversion of DME to olefin (DTO) over various SAPO-34 catalysts was carried out using a fixed bed reactor. Main products of the reaction were light olefins such as ethylene, propylene and butenes. The best reaction conditions for high life time of the catalyst and high selectivity of light olefins were a reaction temperature of $400^{\circ}C$ and a WHSV of $3.54h^{-1}$. In addition, it was found that the deactivation of a SAPO-34 catalyst can be significantly suppressed by the addition of $ZrO_2$ as a supporter.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.529-538
• /
• 2010

This paper presents a reliability-based topology optimization (RBTO) based on bidirectional evolutionary structural optimization (BESO). In design of a structure, uncertain conditions such as material property, operational load and dimensional variation should be considered. Deterministic topology optimization (DTO) is performed without considering the uncertainties related to the design variables. However, the RBTO can consider the uncertainty variables because it can deal with the probabilistic constraints. The reliability index approach (RIA) and the performance measure approach (PMA) are adopted to evaluate the probabilistic constraints in this study. In order to apply the BESO to the RBTO, sensitivity number for each element is defined as the change in the reliability index of the structure due to removal of each element. Smoothing scheme is also used to eliminate checkerboard patterns in topology optimization. The limit state indicates the margin of safety between the resistance (constraints) and the load of structures. The limit State function expresses to evaluate reliability index from finite element analysis. Numerical examples are presented to compare each optimal topology obtained from RBTO and DTO each other. It is verified that the RBTO based on BESO can be effectively performed from the results.

• 한국식품영양학회지
• /
• 제11권6호
• /
• pp.678-682
• /
• 1998

A strain of Streptomyces sp. SK-862, isolated from soil in Wonju city, was able to prodce a biologically active substance that has a strong inhibitory activity against proteolsis by trypsin. The inhyibitory substance was extracted by n-butanol, and then purified by the adsorption chromatography followed by the reverse-phase high performacne liquid chromatography. The purified substance was stable over the pH range from 2 to 10, but was unstable when treated at 8$0^{\circ}C$ for 60 min. This substance was soluble in water, methanol, ethanol nd butanol, but insoluble in chlorofrom and ethylacetate. The Rf value of the purified substance on the thin layer chromatography were 0.56 in n-butanol : methanol : water(5 : 3 : 1v/v) solvent system compare dto 0.23 in ethanol : ammonium hydoxide : water(8 : 1 : 1v/v) solvent system. This substance has maximum absorption at 259 nm. The chemical reaction of the substance was negative for sugar but positive for ninhydrine and iodine reaction.

• 한국경영과학회지
• /
• 제18권3호
• /
• pp.113-127
• /
• 1993

In this study, a substitution model of the evolutionary generations of technological products is presented. The purpose of the model is to examine the demand side mechanisms which generate successive product life cycles along the path of technological improvements. In the model, the nature of substitution processes is summarized dto the demand function which is derived from the consumer's udtility maximization problem. To describe the nature of technological substitution processes, the concept of the vertical differentiation and the consumption externalities are considered in the utility function. The former is used to characterize the result of technological improvement and the latter is used in explaining the inertia of demand. To show the validity of the model, an empirical study is carried out using the data of the world DRAM market.

• 시스템엔지니어링학술지
• /
• 제9권1호
• /
• pp.1-11
• /
• 2013

In this study, unattended Light Rail Transit System (K-AGT) is a general-purpose standards safety requirements of IEC 62267 based System Engineering Process (SEP) was used. Functional analysis and physical architecting for each requirements through the vehicle was classified into sub-systems, design was analyzed in terms of SE. The analysis of the proposed system engineering process, unattended train operation (UTO), driverless train operation(DTO) design of the safety measures to be used as the basis is studied.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.59-66
• /
• 1997

Neural networks has widely been be used for several practical applications such as speech, image processing, and pattern recognition. Thus, a approach to the voltage-controlled current source in areas of neural networks, the key features of CNN in locally connected only to its netighbors. Because the architecture of the interconnection elements between cells in very simple and space invariant, CNNs are suitable for VLSI implementation. In this paper, processing element of digital programmable CNN with variable template memory was implemented using CMOS circuit. CNN PE circuit was designe dto control gain for obtaining the optimal solutions in the CNN output. Performance of operation for 4*4 CNN circuit applied for fixed template and variable template analyzed with the result of simulation using HSPICE tool. As a result of simulations, the proposed variable template method verified to improve performance of operation in comparison with the fixed template method.

• 디지털융복합연구
• /
• 제11권6호
• /
• pp.1-9
• /
• 2013

2012년 12월 31일 디지털 전환 종료 이후에도 아날로그 대역에 고스란히 남아 있는 아날로그 케이블 가입자의 디지털 전환에 차질이 빚어지고 있다. 디지털 전환을 위해서는 디지털 TV를 보유하거나 DtoA 컨버터를 설치하면 되지만 이는 지상파 방송 직접 수신 가구에만 해당되는 것으로서 디지털 전환 이후에도 지속적으로 유료채널을 시청하고자 하는 아날로그 케이블 가입자와 저소득 가구의 시청에는 제한이 초래될 것으로 우려되고 있다 더욱이 전체 유료방송 가입자의 절반에 해당하는 케이블 가입자의 디지털 전환이 이루어지지 않고서는 진정한 의미의 디지털 전환이라고 판단하기 어렵기 때문에 정부도 이에 대해 비로소 심각한 고려의 대상으로 인지하고 있는 중이다. 본 연구는 디지털 전환을 맞아 본격적인 디지털 TV 시청의 사각지대에 놓이게 된 아날로그 케이블의 문제점과 원인, 그리고 해결방안을 모색하고자 했다. 연구결과 현재의 디지털 전환의 위기 원인은 보편적 서비스라고 할 수 있는 디지털 지상파 신호를 직접 수신받을 수 있는 가구 수가 제한되어 있다는 점과 이를 보완할 수 있는 유료방송의 디지털 전환시장이 구조적으로 미성숙하고 상호약탈적인 경쟁시장을 형성한다는 점에서 장기적으로 디지털 전환에 부정적인 영향을 미치는 것으로 나타났다. 이와 같은 문제로 인해 아날로그 케이블 가입가구에 대한 디지털전환 보조금 지원이나 저소득층 가구의 자유로운 디지털 플랫폼 선택권 강화, 클리어 쾀이나 8VSB 신호의 재전송과 같은 정책적 대안이 적극 마련되어야 할 것으로 판단된다.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.14-21
• /
• 1997

This study was conducte dto fabricate 2GHz circulator using Ca,Sn substituted UIG(yttrium iron garnet)ceramics. When the electric, magnetic and microwave properties were measured in Ca, Sn substituted YIG, the measured perimittivity and perfmeability in microwave frequencies were 16.25, 0.8964. For $Y_{2.4}$C $a_{0.3}$A $n_{0.3}$F $e_{3.5}$A $l_{1.5}$ $O_{12}$ garnet ceramics sintered at 1400.deg. C, the ferrimagnetic resonance line width (.DELTA.H) at 10GHz was 53 Oe and saturation magnetization was 375G. The strip-line circulator was simulated with 3-D FEM (finite element method) software and designed at the center frequency of 2GHz. The fabricated strip-line junction circulator using above YIG ceramics had insertion loss of 1.271dB, return loss of 23.843dB, isolation of 21.751dB at the center frequency 1.855GHz.z.z.z.z.z.z.