• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.87-97
• /
• 2018

Bus, a major transportation mode, doesn't have a systematical evaluation system for dangerous driving behavior yet. This paper analyzes the characteristics and pattern of bus driving behavior using Digital Tacho Graph(DTG) data on express bus. 8 types of dangerous driving behavior were considered according to timeslot, the day of week and weather condition. As results, rapid acceleration, rapid left right turn and rapid deceleratio accounted for more than 97% and relatively high percentages were shown in dawn, on Friday and on the clear day, respectively. From the statistical analysis, correlation between the dangerous driving types and difference according the timeslot were found, and 3 groups considering the level of the dangerous driving were suggested. This study contributes to setting an efficient and reliable eduction system for using driving simulators.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.160-168
• /
• 2017

In the past 10 years, the accidents caused by drowsy driving have occupied about 23% of all traffic accidents in Korea expressway network and this rate is the highest one among all accident causes. Unlike other types of accidents caused by speeding and distraction to the road, the accidents by drowsy driving should be managed differently because the drowsiness might not be controlled by human's will. To reduce the number of accidents caused by drowsy driving, researchers previously focused on the spot based analysis. However, what we actually need is a segment (link) and occurring time based analysis, rather than spot based analysis. Hence, this research performs initial effort by adapting link concept in terms of drowsy driving on highway. First of all, we analyze the accidents caused by drowsy in historical accident data along with their road environments. Then, links associate with driving time are analyzed using digital tachograph (DTG) data. To carry this out, negative binomial regression models, which are broadly used in the field, including highway safety manual, are used to define the relationship between the number of traffic accidents on expressway and drivers' behavior derived from DTG. From the results, empirical Bayes (EB) and potential for safety improvement (PSI) analysis are performed for potential risk segments of accident caused by drowsy driving on the future. As the result of traffic accidents caused by drowsy driving, the number of the traffic accidents increases with increase in annual average daily traffic (AADT), the proportion of trucks, the amount of DTG data, the average proportion of speeding over 20km/h, the average proportion of deceleration, and the average proportion of sudden lane-changing.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.287-288
• /
• 2019

본 논문에서는 대용량 화물 DTG 데이터 분석을 위한 빅데이터 플랫폼을 설계 및 구현한다. DTG(digital tacho graph)는 차량운행기록을 실시간으로 저장하는 장치로서, 차량의 GPS, 속도, RPM, 제동유무, 이동거리 등 차량운행 관련 데이터가 1초 단위로 기록된다. 차량 운행 패턴 및 분석을 하기 위해서는 DTG 데이터의 빠른 처리가 필수적이며, 특히 대용량 DTG 데이터를 가공 및 변환하기 위해서는 별도의 플랫폼이 필요하다. 본 논문에서는 오픈소스 기반의 빅데이터 프레임워크인 스파크(Spark)를 이용하여 대용량 화물 DTG 데이터의 전처리 플랫폼을 구현하였다. 실제 대용량 화물 DTG 데이터를 대상으로 데이터를 변환 및 지도상에 표현해 보인다.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.26-31
• /
• 2022

Changwon City has the second highest accident rate with 79.6 according to the city bus accident rate. In fact, 250,000 people use the city bus a day in Changwon, The number of accidents is increasing gradually. In addition, a recent fire accident occurred in the engine room of a city bus (CNG) in Changwon, which has gradually expanded the public's anxiety. In the case of business vehicles, the government conducts inspections with a short inspection cycle for the purpose of periodic safety inspections, etc., but it is not in the monitoring stage. In the case of city buses, the operation records are monitored using Digital Tacho Graph (DTG). As such, driving records, methods, etc. are continuously monitored, but inspections are conducted every six months to ascertain the safety and performance of automobiles. It is difficult to identify real-time information on automobile safety. Therefore, in this study, individual automobile management solutions are presented through machine learning techniques of inspection results based on driving records or habits by linking DTG data and Vehicle Inspection Management System (VIMS) data for city buses in Changwon from 2019 to 2020.

• The Journal of Bigdata
• /
• v.4 no.2
• /
• pp.207-220
• /
• 2019

Recent developments in information and communication technology has enabled the deployment of sensor based data to provide real-time services. In Korea, The Korea Transportation Safety Authority is collecting driving information of all commercial vehicles through a fitted digital tachograph (DTG). This information gathered using DTG can be utilized in various ways in the field of transportation. Notably in autonomous driving, the real-time analysis of this information can be used to prevent or respond to dangerous driving behavior. However, there is a limit to processing a large amount of data at a level suitable for real-time services using a traditional database system. In particular, due to a such technical problem, the processing of large quantity of traffic big data for real-time commercial vehicle operation information analysis has never been attempted in Korea. In order to solve this problem, this study optimized the new database server system and confirmed that a real-time service is possible. It is expected that the constructed database system will be used to secure base data needed to establish digital twin and autonomous driving environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.28-41
• /
• 2022

A road system with CV(Connected Vehicle)s, which is often referred to as a cooperative intelligent transportation system (C-ITS), provides various road information to drivers using an in-vehicle warning system. Road environments with CVs induce drivers to reduce their speed or change lanes to avoid potential risks downstream. Such avoidance maneuvers can be considered to improve driving behaviors from a traffic safety point of view. Thus, empirically evaluating how a given in-vehicle warning information affects driving behaviors, and monitoring of the correlation between them are essential tasks for traffic operators. To quantitatively evaluate the effect of in-vehicle warning information, this study develops a method to calculate compliance rate of drivers where two groups of speed profile before and after road information is provided are compared. In addition, conventional indexes (e.g., jerk and acceleration noise) to measure comfort of passengers are examined. Empirical tests are conducted by using PVD (Probe Vehicle Data) and DTG (Digital Tacho Graph) data to verify the individual effects of warning information based on C-ITS constructed in Seoul metropolitan area in South Korea. The results in this study shows that drivers tend to decelerate their speed as a response to the in-vehicle warning information. Meanwhile, the in-vehicle warning information helps drivers to improve the safety and comport of passengers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.224-239
• /
• 2023

C-ITS (Cooperative-Intelligent Transportation System) refers to user safety-oriented technology and systems that provide forward traffic situation information based on a two-way wireless communication technology between vehicles or between vehicles and infrastructure. Since the Daejeon-Sejong pilot project in 2016, the C-ITS infrastructure has been installed at various locations to provide C-ITS safety services through highway and local government demonstration projects. In this study, a methodology was developed to verify the effectiveness of the warning information using individual vehicle data collected through the Gwangju Metropolitan City C-ITS demonstration project. The analysis of the effectiveness was largely divided into driving behavior impact analysis and environmental analysis. Compliance analysis and driving safety evaluation were performed for the driving impact analysis. In addition, to supplement the inadequate collection of Probe Vehicle Data (PVD) collected during the C-ITS demonstration project, Digital Tacho Graph ( DTG ) data was additionally collected and used for effect analysis. The results of the compliance analysis showed that drivers displayed reduced driving behavior in response to warning information based on a sufficient number of valid samples. Also, the results of calculating and analyzing driving safety indicators, such as jerk and acceleration noise, revealed that driving safety was improved due to the provision of warning information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2019

The accident of mass transit such as a bus could draw the large casualties and this induces social and economic losses. Recently, severe bus accidents caused by tiredness and inattention of bus drivers occurred and those lead to growing interest in bus accidents and the drivers' work environment. Therefore, this study analyzes the accident based on the work environment of bus drivers and route-bus categories. For the research, this study collected digital tachograph data and the bus company information for 271 domestic bus companies in 2017 and used ANOVA test and chi-square test as statistical methodologies. As a result, we figured out there are statistically significant differences in the accident according to the working environments. Especially, the present study confirmed the intracity bus with working every other day has the most frequent accidents. We expect that the results of this study be used as foundations for the improvement of working conditions to reduce route-bus accidents in the future.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.47-56
• /
• 2022

The safe driving reward system aims to reduce the loss of life and property by reducing the occurrence of accidents by motivating safe driving and encouraging active participation by providing direct reward to vehicle drivers who have performed safe driving. In the case of the existing digital tachograph, the goal is to limit dangerous driving by recording the driving status of the vehicle whereas the safe driving reward system is a support measure to increase the effect of accident prevention and induces safe driving with financial reward when safe driving is performed. In other words, in an area where accidents due to speeding are high, direct reward is provided to motivate safe driving to prevent traffic accidents when safe driving instructions such as speed compliance, maintaining distance between vehicles, and driving in designated lanes are performed. Since these safe operation data and reward histories must be managed transparently and safely, the reward evidences and histories were constructed using the closed blockchain Hyperledger Fabric. However, while transparency and safety are guaranteed in the blockchain system, low data processing speed is a problem. In this study, the sequential block generation speed was as low as 10 TPS(transaction per second), and as a result of applying the acceleration function a high-performance network of 1,000 TPS or more was implemented.