• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.15-27
• /
• 1981

In order to investigate on the field performance of 3.5PS power tiller and to obtain the optimum using conditions of it, this experiment has been carried on the plowing operation, the rotary harrowing operation and the ridging operation that compared 3.5PS power tiller(KC-450) with the existing 5PS(DT-40) and 8PS(DT-85) power tiller. It has been performed at Suck Jung-Dong, Ansung Country, from March to October in 1980. The results of this field test were obtained as follows; 1. The plowing performance of KC-450 tiller was found to be 125min/10a that was lower than that of DT-85 tiller by 26min/10a in the effective plowing speed 0.9m/sec. 2. The field efficiency of KC-450 tiller was the highest among the power tillers as to be 82 persent that was higher than that of DT-85 tiller by 5 persent in the effective plowing speed 1m/sec. 3. The rotary harrowing performances of DT-40 tiller and DT-85 tiller were higher than that of KC-450 tiller in the rotary harrowing operation of the same speed, and the field efficiency of KC-450 tiller and DT-40 tiller were higher than that of DT-85 tiller in the rotary harrowing operation. 4. The ridging Performance of testing power tillers were nearly equality in the ridging operation of the same speed, and the field efficiency of testing tillers were higher KC-450 tiller than DT-40 tiller, DT-40 tiller than DT-85 tiller. 5. The work performance of power tiller increased with increase in the size of field area. Work performance and field efficiency of KC-450 tiller were higher than other tillers below 8a in field size 6. DT -85 tiller was more useful in deep plowing depth. But below 8a in field size KC-450 tiller was more easily operated and its field efficiency was higher 7. KC-450 tiller should be more useful to operate in the small size field or in the small scale farming and for the cultivation of vegetables, gardening plants, medicinal herb and tobacco plants, or for the cultivation in vinyl house.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.434-453
• /
• 2010

In this paper, we propose 3DTE(3-Dimensional Transform Environment) that is based on 3DT(Dimensional Transform) that performs 2-dimensional integer DCT(Discrete Cosine Transform) based on $4{\times}4$ block and 1-dimensional integer DCT based on $4{\times}1$ block after collecting same frequency coefficients in neighboring $4{\times}4$ block and supports it's additional coding tools for high performance. The transform of 3DT can keep prediction error by using $4{\times}4$ block and reduce spatial redundancy additionally. The proposed 3DTE can provide coding tools to improve the coding efficiency with using 3DT. The performance of 3DTE compared to JM11.0 is average 3.58% and 5.40% bit savings for all test sequences and HD sequences, respectively, with keeping subjective video quality in High profile.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.40-45
• /
• 2003

A new term Data Technology (DT) is defined, and its roles in modern technology are explained. Next, knowledge-based Six Sigma (KBSS) is proposed, and how the methodologies how it can be implemented in industry are suggested. Also the relationship between DT and KBSS Is commented.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.521-527
• /
• 2010

Fibroblast growth factor receptor 1 (FGFR1) plays roles in angiogenesis, wound healing, and embryonic development via the regulation of cell proliferation, differentiation, and survival. It is well known that ectopic expression of FGFR1 is associated with cancer development. To characterize the function of FGFR1 in the normal and cancer cell lines DF-1 and DT40, respectively, we performed FGFR1 knockdown by RNA interference. In the DT40 cells, FGFR1 knockdown induced upregulation of FGFR2 and FGFR3 expression, downregulation of pro-apoptosis-related genes, and upregulation of anti-apoptosis-related genes. However, in DF-1 cells, FGFR1 knockdown induced upregulation of pro-apoptosis-related genes and downregulation of anti-apoptosis-related genes. Our data suggest that repression of FGFR1 induced upregulation of other FGF receptors and anti-apoptosis-related genes in cancer cells and pro-apoptosis-related genes in normal cells.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.77-81
• /
• 2008

Purpose: This study was to investigate the refractive state of an asian population (male: 39, female: 53) from 21 to 30 years old who visited the A optical shop at jongnogu in seoul. Methods: The visual acuity test was performed by the object and subject method. Results: Among the 184 eyes, myopia is 83.16% and emmetropia is 16.84%, respectively. As for the equivalent spheric power of myopic abnormal refractive eyes, the -m0.5Dt < spheric equivalent ${\leq}$ -2.00Dt was 40.53%, the -2.00Dt < spheric equivalent ${\leq}$ -6.00Dt was 51.63% and anything over the -6.00Dt was 7.85%. The percentages of with-the-rule, against-the-rule and oblique astigmatism among people with astigmatism were 46.67%, 35.56% and 7.77%, respectively. The average of pupillary distance in male (64.5${\pm}$2.9 mm) was greater than that in female (61.9${\pm}$2.3 mm). Conclusions: Korean opticians were provided some useful information about making up a prescription by this research.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.477-486
• /
• 2020

The purpose of this study was to evaluate the effects of reconstruction filters, X-ray source trajectories and intervals in the quality of digital tomosynthesis (DT) images, and the results was clinically validated. The filtered back-projection was implemented by using Ramp, Shepp-Logan, Cosine, Hamming, Hann and Blackman filters, and the X-ray source trajectories were simulated with 1 × 36, 2 × 18, 3 × 12, 4 × 9 and 6 × 6 arrays. The X-ray source intervals were 5, 10, 20, 30 and 40 mm. The depth resolution, spatial resolution and noise of DT image were evaluated by measuring artifact spread function (ASF), full width at half maximum (FWHM) and signal-to-noise ratio (SNR), respectively. The results showed that the spatial resolution and noise properties of DT images were maximized by the Ramp and Blackman filters, respectively, and the depth resolution and noise properties of the DT images obtained with a 1 × 36 X-ray source trajectory were superior to the other trajectories. The depth resolution and noise properties of DT images improved with an increase of X-ray source intervals, and the high X-ray source intervals degraded the spatial resolution of DT images. Therefore, the characteristics of DT images are highly dependent on reconstruction filters, X-ray source trajectories and intervals, and it is necessary to use optimal imaging parameters in accordance with diagnostic purpose.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.52.4-52.4
• /
• 2021

The 7-dimensional Telescope (7DT) is an innovative multiple telescope system that can perform a rapid identification of optical counterparts of gravitational-wave (GW) sources and a wide variety of other astronomical projects. This telescope is being developed as a part of the recently approved National Challenge program, the GW Universe project, with a full operation planned at the end of 2023. The word 7-dimension stands for x, y, z positions, the radial velocity, the time, the wavelength, and the flux of astronomical sources, implying the telescope's capability of performing time-series wide-field, IFU-type spectroscopic observations. The 7DT is composed of about twenty 0.5-m wide-field telescopes, and it can obtain spectral-imaging data at 40 different wavelengths to the depth of 20 AB mag with 3 min exposure for a given epoch. In this talk, we will introduce the telescope system, and outline its scientific capabilities with an emphasis on multi-messenger astronomy and a few other key science topics.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.21-28
• /
• 2013

Phenomenon of droplet impingement with high temperature wall needs to be investigated because atomization process of droplet and cooling process of the wall by the impingement are very important in industry, thus studies concerned with temperature of piston wall have been conducted in spray characteristics analysis of diesel engine. Hence, in this study, we defined $DT_{sat}(=T_w-T_{sat})$ superheat degree of the wall by difference between $T_w$ considering surface temperature of piston in the actual engine and $T_{sat}$ saturation temperature of the fuel and then investigated spray behavior of wall impinging with variance of the boiling process. In this study, in order to analyze wall impingement of droplet in accordance with difference of boiling condition, calculational conditions were set as $DT_{sat}=40K$(nucleate boiling), $DT_{sat}=140K$(transition boiling), and $DT_{sat}=240K$(film boiling). As a result, it can be found that fuel vapor increases and droplet mass decreases in the order of the nucleate boiling, transition boiling, and film boiling.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.7-13
• /
• 2012

An experimental study has been done to investigate the explosion characteristics of aluminum powders with different sizes and concentrations in a 20 L spherical explosion vessel. Two different sizes of aluminum powder were used : $15.1{\mu}m$ and $34.8{\mu}m$ with a volume mean diameter. The results revealed that $15.1{\mu}m$ Al powder has a Lower explosion limit (LEL) of $40g/m^3$, a maximun explosion pressure ($P_{max}$) of 9.8 bar and a maximum rate of pressure rise ($[dP/dt]_{max}$) of 1852 bar/s, in $34.8{\mu}m$ Al powder, LEL of $70g/m^3$, $P_{max}$ of 7.9 bar and $[dP/dt]_{max}$ of 322 bar/s. The LEL of Al powders tended to increase with the increase of particle size. Also, it was found that the flame velocity calculated from the powder with $15.1{\mu}m$ was about 5 times higher than that of the powder of $34.8{\mu}m$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.1
• /
• pp.2853-2877
• /
• 1973

Models of cross-sections and channels were made in order to measure seepage losses. Cross-sections were made of sand, sandy clay loam and loam, their thicknesses being 30cm and 40cm, respectively. Flow depths kept in the cross-sections were 4cm, 6cm, 8cm and 10cm. Straight and curved channel models were provided so as to measure seepage losses, when constant water depths maintained at the heads of the channels were 7.3cm and 5.7cm, respectively. The results obtained in this experiment are presented as follows: 1) A cumulative seepage loss per unit length at a point in the channel varies in accordance with time and flow depth. The general equation of cumulative seepage loss may be as follows(Ref. to Table V.25): $$q_{cum}=\int_{o}^aq(a)dt+\int_a^bq(b)dt+\int_b^tq(c)dt$$ 2) In case that the variation of water depth through the channel is slight, the total seepage loss may be computed by applying the following general equation: $$\={q}_{cum}{\cdot}x=\int_o^tq_{cum}\frac{{\partial}x}{{\partial}t}dt$$ 3) Because seepage loss varies considerably according to water depth in case that the variation of flow depth through the channel is great, seepage loss should be computed by taking account of the change of flow depth. 4) The relation between time and traveling distance of water flow may be presented as the following general equation(Ref. to Table V.29): $$x=pt^r$$ 5) The ratios of the seepage losses of the straight channel to the curved channel are 1:1.03 for a flow depth of 7.3cm and 1:1.068 for that of 5.7cm. 6) The ratios of the seepage losses occurring through the bottom to those through the inclined plane in the channel cross-section are 1:2.24 for a water depth of 8cm and 1:2.47 for a depth of 10cm in case that soil-layer is 30cm in thickness. Similarly, those ratios are 1:2.62 and 1:2.93 in case of a soil-layer thickness of 40cm(Ref. to Table V.5).