• 제목/요약/키워드: DSVM

검색결과 8건 처리시간 0.021초

불량 웨이퍼 탐지를 위한 함수형 부정 탐지 지지 벡터기계 (Fraud detection support vector machines with a functional predictor: application to defective wafer detection problem)

  • 박민형;신승준
    • 응용통계연구
    • /
    • 제35권5호
    • /
    • pp.593-601
    • /
    • 2022
  • 빈번하지는 않지만 한번 발생하면 상대적으로 큰 손실을 가져오는 사례를 통칭하여 부정 사례(Fraud)라고 부르며, 부정 탐지의 문제는 많은 분야에서 활용된다. 부정 사례는 정상 사례에 비해 상대적으로 관측치가 매우 적고 오분류의 비용이 월등히 크기 때문에 일반적인 이항분류 기법을 바로 적용할 수 없다. 이러한 경우에 활용할 수 있는 방법이 부정 탐지 지지 벡터기계(FDSVM)이다. 본 논문에서는 공변량이 함수형일 때 활용 가능한 함수형 부정 탐지 지지 벡터기계(F2DSVM)를 제안하였다. 제안된 방법을 사용하면 함수형 공변량을 가진 데이터에서 사용자가 목표하는 부정 탐지의 성능을 만족시키는 제약하에서 최적의 예측력을 가지는 분류기를 학습시킬 수 있다. 뿐만아니라, 통상적인 SVM과 마찬가지로, F2DSVM도 자취해의 조각별 선형성을 보일 수 있으며 이를 바탕으로 효율적인 자취해 알고리즘을 활용할 수 있고 분류기의 학습 시간을 크게 단축시킬 수 있다. 마지막으로, 반도체 웨이퍼 불량 탐지 문제에 제안된 F2DSVM을 적용해 보았고, 그 활용 가능성을 확인하였다.

Double-Objective Finite Control Set Model-Free Predictive Control with DSVM for PMSM Drives

  • Zhao, Beishi;Li, Hongmei;Mao, Jingkui
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.168-178
    • /
    • 2019
  • Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.

홍수기 유량측정을 위한 통합 드론측정시스템 개발 (Development of Integrated drone measurement system for Flood discharge measurement)

  • 이태희;강종완
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.82-82
    • /
    • 2023
  • 홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 Lee et al.(2021)은 드론과 전자파표면유속계의 기능을 융합한 DSVM(Dron and Surface Veloctity Meter using doppler radar) 측정방법을 개발하였다. 전자파표면유속계 측정의 제한 요소인 진동을 감소시키기 위해 댐퍼플레이트를 개발하였고 금강의 지류인 봉황천에 현장 적용을 통해 DSVM 측정방법의 실용성을 확인하였다. 기존 연구에서 DSVM 방법은 드론의 각 측선 이동을 위한 조종과 전자파표면유속계 측정의 제어를 측정자가 수행하였는데 본 연구에서는 통합 드론측정시스템(IDMS, Integrated Drone Measurement System) 개발을 통해 측정자의 조종 의존도를 줄임과 동시에 안전하고 정확한 유량측정을 위해 노력하였다. 기존 댐퍼플레이트의 상하 진동 흡수 기능뿐만 아니라 전자파표면유속계의 흔들림 현상 등 자세 제어 기능을 보완하기 3축 모터를 적용한 방수짐벌을 개발하여 측정 정확도를 향상시켰다. 미션컴퓨터 개발로 측정지점의 측정 임무정보를 DB화하여 각 측선별 헤딩, 고도, 이동 등 자동항법 기능과 기체의 안정화 이후 전자파표면유속계를 자동으로 제어하여 측정을 실시하는 기능을 구현하였다. 또한 통합 GCS(Ground Control System)를 통해 비행 및 측정에 대한 모든 정보를 확인하고 컨트롤 할 수 있게 하였다. 2022년 금산군(제원대교), 무주군(취수장), 경주시(서천교) 지점에서 홍수기 유량측정에 도입하여 중간단면적법, 지표유속법을 적용하여 통합드론측정시스템의 실용성을 검증 완료하였다. 2023년 현장에 18대의 통합 드론측정시스템을 도입하여 홍수기 유량측정에 활용할 계획이다.

  • PDF

드론을 이용한 홍수기 유량측정방법 개발(II) - 전자파표면유속계 적용 (Development of flow measurement method using drones in flood season (II) - application of surface velocity doppler radar)

  • 이태희;강종완;이기성;이신재
    • 한국수자원학회논문집
    • /
    • 제54권11호
    • /
    • pp.903-913
    • /
    • 2021
  • 홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 본 연구에서는 드론(Drone)과 전자파표면유속계(Surface velocity doppler radar)의 기능을 조합하여 최소 인력으로 짧은 시간에 간편하고, 안전하게 홍수기에 하천유량을 측정할 수 있는 방법을 개발하였다. 기존 드론을 이용한 유량측정 연구에서 도출된 바람, 강우 등 기상 요인에 의한 드론의 기계적인 한계를 극복하기 위해 본 연구에서는 IP56 등급의 방진·방수 성능, 최대 36 km/h의 풍속에서 안정적인 비행능력과 최대 10 kg을 탑재할 수 있는 드론을 개발하였다. 또한 전자파표면유속계 측정에 있어서 주요 제약 요소인 진동을 제거하기 위해 드론과 전자파표면유속계를 결합하는 댐퍼플레이트를 개발하였다. 이들 비행장비와 유속계를 결합시킨 유속계 DSVM (Dron and Surface Veloctity Meter using doppler radar)을 제작하였으며, 봉황천(금강 제1지류)에 위치한 금산군(황풍교)지점에서 DSVM을 운용하여 홍수량을 측정한 결과 ±3.5%의 오차가 발생하였다. 또한 측정된 표면유속으로부터 평균유속을 산정할 때 정확도 향상을 위해 ADCP를 이용하여 동시 측정하고, 평균유속을 비교하여 평균유속환산계수(0.92)를 산정하였다. 본 연구에서는 드론과 전자파표면유속계를 결합해 측정한 유량과 ADCP 및 봉부자를 이용해 측정한 유량을 비교하고, DSVM의 적용 및 활용 가능성을 확인하였다.

드론의 자율운항 및 전자파표면유속계 자동 측정 시스템 개발 (Development of Autonomous navigation of Drones and Automatic measurement system for Surface velocity doppler radar)

  • 이태희;강종완;정승교;김건우;이기성;이신재
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.90-90
    • /
    • 2022
  • 전자파표면유속계를 이용한 유량측정은 전자파를 발사한 후 수표면에 반사되는 전자파의 도플러효과를 이용하여 표면유속을 측정하는 방법이다. 국제적으로 1980년대부터 홍수유량측정의 어려움을 극복하고자 전자파표면유속계를 개발하여 하천 유량측정 업무에 활용하였다. 미국의 경우U.S. Geological Survey (USGS)에서 교량, 케이블웨이, 제방, 헬리콥터, 비행기 등 전자파표면유속계의 측정 위치에 따라 주파수 범위를 달리하며 유속을 측정하는 연구가 진행되었다. 국내의 경우 Lee et al.(2021)은 드론을 이용한 전자파표면유속계 측정을 위해 드론으로부터 전자파표면유속계로 전달되는 진동을 제거하고 전자파표면유속계의 흔들림 방지를 위한 댐퍼플레이트를 개발하여 드론과 전자파표면유속계를 결합한 DSVM(Dron and Surface Veloctity Meter using doppler radar) 측정방법에 대한 실용성을 확인하였다. 기존 연구에서 DSVM 방법은 드론의 각 측선 이동을 위한 조종 및 전자파표면유속계 측정의제어를 측정자가 수행하였는데 본 연구에서는 자동 측정 시스템 개발을 통해 측정자의 조종 의존도를 줄임과 동시에 안전하고 정확한 유량측정을 위해 노력하였다. 측정지점의 위치정보를 DB화하여 각 측선별 이동하는 자율운항 기능과 전자파표면유속계를 자동으로 제어하여 측정을 실시하는 기능을 개발하였다. 또한 전자파표면유속계 컨트롤 시스템과 GCS(Ground Control System)를 통합하여 한 시스템에서 측정의 모든 상황을 컨트롤 할 수 있게 하였다. 현재까지는 DSVM 방법의 자율운항 기능과 자동 측정 시스템의 테스트를 완료하였고 2022년 홍수기 유량측정에 도입하여 홍수기 유량측정의 실용성을 판단할 계획이다.

  • PDF

고분자 전해질 연료전지용 막가습기의 상대습도 추정을 위한 소프트센서 개발 (Soft Sensor Development for Predicting the Relative Humidity of a Membrane Humidifier for PEM Fuel Cells)

  • 한인수;신현길
    • 한국수소및신에너지학회논문집
    • /
    • 제25권5호
    • /
    • pp.491-499
    • /
    • 2014
  • It is important to accurately measure and control the relative humidity of humidified gas entering a PEM (polymer electrolyte membrane) fuel cell stack because the level of humidification strongly affects the performance and durability of the stack. Humidity measurement devices can be used to directly measure the relative humidity, but they cost much to be equipped and occupy spaces in a fuel cell system. We present soft sensors for predicting the relative humidity without actual humidity measuring devices. By combining FIR (finite impulse response) model with PLS (partial least square) and SVM (support vector machine) regression models, DPLS (dynamic PLS) and DSVM (dynamic SVM) soft sensors were developed to correctly estimate the relative humidity of humidified gases exiting a planar-type membrane humidifier. The DSVM soft sensor showed a better prediction performance than the DPLS one because it is able to capture nonlinear correlations between the relative humidity and the input data of the soft sensors. Without actual humidity sensors, the soft sensors presented in this work can be used to monitor and control the humidity in operation of PEM fuel cell systems.

A Multi-Class Classifier of Modified Convolution Neural Network by Dynamic Hyperplane of Support Vector Machine

  • Nur Suhailayani Suhaimi;Zalinda Othman;Mohd Ridzwan Yaakub
    • International Journal of Computer Science & Network Security
    • /
    • 제23권11호
    • /
    • pp.21-31
    • /
    • 2023
  • In this paper, we focused on the problem of evaluating multi-class classification accuracy and simulation of multiple classifier performance metrics. Multi-class classifiers for sentiment analysis involved many challenges, whereas previous research narrowed to the binary classification model since it provides higher accuracy when dealing with text data. Thus, we take inspiration from the non-linear Support Vector Machine to modify the algorithm by embedding dynamic hyperplanes representing multiple class labels. Then we analyzed the performance of multi-class classifiers using macro-accuracy, micro-accuracy and several other metrics to justify the significance of our algorithm enhancement. Furthermore, we hybridized Enhanced Convolution Neural Network (ECNN) with Dynamic Support Vector Machine (DSVM) to demonstrate the effectiveness and efficiency of the classifier towards multi-class text data. We performed experiments on three hybrid classifiers, which are ECNN with Binary SVM (ECNN-BSVM), and ECNN with linear Multi-Class SVM (ECNN-MCSVM) and our proposed algorithm (ECNNDSVM). Comparative experiments of hybrid algorithms yielded 85.12 % for single metric accuracy; 86.95 % for multiple metrics on average. As for our modified algorithm of the ECNN-DSVM classifier, we reached 98.29 % micro-accuracy results with an f-score value of 98 % at most. For the future direction of this research, we are aiming for hyperplane optimization analysis.

Speech Emotion Recognition with SVM, KNN and DSVM

  • Hadhami Aouani ;Yassine Ben Ayed
    • International Journal of Computer Science & Network Security
    • /
    • 제23권8호
    • /
    • pp.40-48
    • /
    • 2023
  • Speech Emotions recognition has become the active research theme in speech processing and in applications based on human-machine interaction. In this work, our system is a two-stage approach, namely feature extraction and classification engine. Firstly, two sets of feature are investigated which are: the first one is extracting only 13 Mel-frequency Cepstral Coefficient (MFCC) from emotional speech samples and the second one is applying features fusions between the three features: Zero Crossing Rate (ZCR), Teager Energy Operator (TEO), and Harmonic to Noise Rate (HNR) and MFCC features. Secondly, we use two types of classification techniques which are: the Support Vector Machines (SVM) and the k-Nearest Neighbor (k-NN) to show the performance between them. Besides that, we investigate the importance of the recent advances in machine learning including the deep kernel learning. A large set of experiments are conducted on Surrey Audio-Visual Expressed Emotion (SAVEE) dataset for seven emotions. The results of our experiments showed given good accuracy compared with the previous studies.