• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.208-214
• /
• 2003

Because the digital control includes microprocessor different from an analog control, the digital control enables to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Window based PC and also to monitor whether exact voltage is output or not. These things are impossible in an analog control. In this paper, a simple buck converter controlled by DSP(TMS320C31) is implemented. This converter outputs 0V to 5V from 15V input voltage and is controlled by a PD algorithm using DSP. Finally the response characteristics of a step reference voltage and in a steady state are analyzed to verify the usefulness of this digital controlled converter.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.931-934
• /
• 1999

For applications in multimedia to which genuine RISC microprocessors are not suitably applicable, a new generation of fast and flexible microprocessors is required. In this paper, as a technique of integrating DSP functionality in a general RISC processor, a RISC that can execute DSP extension instructions is developed to improve the performance of multimedia application execution. This processor can execute DSP instructions in parallel with the execution of ALU instructions for efficient and fast execution. In addition, the execution ability of integer instructions is improved by enhancing the RISC core itself.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.99-102
• /
• 2000

Conventionally, ZVS FB DC/DC converter was controlled by monolithic IC UC3879, which includes the functions of oscillator, error amplifier and phase-shift circuit. Also, microprocessor and DSP have been widely used for the remote control and for the immediate waveform control in ZVS FB DC/DC converter. However the conventional microprocessor controller is complex and difficult to control because the controller consists of analog and digital parts. In the case of the control of FB DC/DC converter, the output is required of driving a direct signal to the switch drive circuits by the digital controller. So, this paper presents the method and realization of designing the digital-to-phase shift PWM circuit controlled by DSP (TMX320C32) in a 2,500A, 40㎾ WS FB DC/DC converter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.517-524
• /
• 1998

This paper discusses the development of a reactive power controller using digital signal processing. Digital Signal Processing is the technique of using digital devices to Process continuous signals or data, often in real-time. And DSP algorithms are associated with a discrete time interval between input samples. When one designs a digital filter, one can use a Laplace transform to determine the continuous time frequency response. The corresponding discrete time transform is called Z transform and depends upon discrete samples of the input spaced equally in time. The objectives of this paper are to minimize real power losses and improve the power factor of a given system. Also, the implementation of a direct-form non recursive filter on the TMS320C31 has been described. The application of this microprocessor-based controller using DSP on test system reveals its numerous advantages. Performance and features of the controller for the reactive power control are analyzed.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.33-35
• /
• 1995

Permanent magnet brushless motor is widely used in industrial drive applications due to high efficiency, high power ratio, and easy maintenance. Position and speed sensors required in this dolor increase the drive cost, and reduce the application range. Some papers present the sensorless speed control using DSP with a high processing performance. However, DSP increases the cost, and makes the implementation difficult. This study has performed the sensorless speed control with a microprocessor system which can be easily accessed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.302-308
• /
• 2006

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-Induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build such a system, the TCP/IP-CAN Gateway which convert a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN Gateway in remote place and a command PC ti be connected ti Ethernet.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.191-191
• /
• 2000

Hydraulic servo system is difficult to be made up and each component is very expensive, it takes long for actual system to make and test and it costs a high price. Because of these characteristics of hydraulic servo system, a real time simulator that could describe behavior of real system is highly demanded, without composing real hydraulic system. So, many studies have been (lone on these subjects and many simulators are developed with superiority. Since the nonlinearity of a hydraulic system common simulator have composed of many calculative times byusing DSP(Digital Signal processing) and have made it possible to find the situations of the system in real time, calculating hydraulic simulation and controller separately. In this study, we suggest real-time simulator that could describe real system without ordinary DSP card. This simulator is composed of 80196kc and personal computer. DSP card that has calculated complex numerical equation is supplanted by personal computer and 80196kc generates control signals independently out of the personal computer. In all process, personal computer is synchronized with one-board microprocessor within sampling time in the closed loop system. This makes it possible to be described in hydraulic servo system in real time. And to make a comparison between the result of the real-time simulator and a hydraulic servo system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.918-924
• /
• 2009

This paper deals with the experimental assessment of the vibration suppression of the smart structures. First, we have presented the paper about the new high-speed active control system that we have developed using the DSP320C6713 microprocessor and a peripheral system composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA95. Since fast data processing is very important in the active vibration control of the structures, we utilized the fast processing DSP320C6713 microprocessor as a main processor to the controller and fast peripheral devices for fast control loop. To realize a fast active vibration control, we have analyzed and tested the processing time of the peripheral devices and provided the corresponding test results. Especially, we have focused on achieving the fast signal amplification of the PA95 device since it takes most of loop times of the control system. Finally, we performed numerous experiments of active vibration control of the aluminum plate to validate the superior performance of the developed control system based on previous mode tests of the plate.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.1
• /
• pp.54-61
• /
• 2000

Conventionally, ZVS FB DC/DC converter was controlled by monolithic IC UC3879, which includes the functions of oscillator, error amplifier and phase-shift circuit. Also, microprocessor and DSP have been widely used for the remote control and for the immediate waveform control in ZVS FB DC/DC converter. However the conventional microprocessor controller is complex and difficult to control because the controller consists of analog and digital parts. In the case of the control of FB DC/DC converter, the output is required of driving a direct signal to the switch drive circuits by the digital controller. So, this paper presents the method and realization of designing the digital-to-phase shift PWM circuit controlled by DSP (TMX320C32) in a 2,500A, 40㎾ ZVS FB DC/DC converter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.292-298
• /
• 1991

A new 6-axis robot controller with a high-speed 32-bit floating-point DSP TMS32OC30 has been developed in Samsung Electronics. The controller composed of Intel 80386 microprocessor for the main controller, and TKS32OC30 DSP chip for joint position controller. The characteristics of the controller are high sampling rate of 200us and fast reponsibility. The main controller supports MS-DOS, kinematics, trajectory planning, and sensor fusion functions which are vision, PLC, and MAP. The one high speed DSP chip is used for controlling 6 axes of a robot in 200us simultaneously. The control law applied is PID controller including a velocity feedforvard in joint position controller. The performance tests, such as command following, CP, were conducted for the controller integrated with a 6 axes robot developed in Samsung Electronics. The results showed a good performance. This controller can also perform the system control with other controllers, the communication with high priority controllers, and visual information processing.