• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1393-1395
• /
• 2003

In this research, we presented a data integration, which integrates ultra high resolution images and complementary data for 3D building reconstruction. In our method, as the ultra high resolution image, Three Line Sensor (TLS) images are used in combination with 2D digital maps, DSMs and both of them. Reconstructed 3D buildings, correctness rate and the accuracy of results were presented. As a result, optimized combination scheme of data sets , sensors and methods was proposed.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1384-1397
• /
• 2007

This paper proposes fast storage techniques for hybrid query of data streams. DSMS(Data Stream Management System) have been researched for processing data streams that have busting income. To process hybrid query that retrieve both current incoming data streams and past data streams data streams have to be stored into disk. But due to fast input speed of data stream and memory and disk space limitation, the main research is not about querying to stored data streams but about querying to current incoming data streams. Proposed techniques of this paper use circular buffer for maximizing memory utility and for make non blocking insertion possible. Data in a disk is compressed to maximize the number of data in the disk. Through experiences, proposed technique show that bursting insertion is stored fast.

• Korean Journal of Remote Sensing
• /
• v.33 no.1
• /
• pp.1-13
• /
• 2017

This study investigates the geometric and spatial image quality analysis of KOMPSAT-3A stereo pair. KOMPSAT-3A is, the latest satellite of KOMPSAT family, a Korean earth observation satellite operating in optical bands. A KOMPSAT-3A stereo pair was taken on 23 November, 2015 with 0.55 m ground sampling distance over Terrassa area of Spain. The convergence angle of KOMPSAT-3A stereo pair was estimated as $58.68^{\circ}$. The investigation was assessed through the evaluation of the geopositioning analysis, image quality estimation and the accuracy of automatic Digital Surface Model (DSM) generation and compared with those of KOMPSAT-3 stereo pair with the convergence angle of $44.80^{\circ}$ over the same area. First, geopositioning accuracy was tested with initial rational polynomial coefficients (RPCs) and after compensating the biases of the initial RPCs by manually collected ground control points. Then, regarding image quality, relative edge response was estimated for manually selected points visible from two stereo pairs. Both of the initial and bias-compensated positioning accuracy and the quality assessment result expressed that KOMPSAT-3A images showed higher performance than those of KOMPSAT-3 images. Finally, the accuracy of DSMs generated from KOMPSAT-3A and KOMPSAT-3 stereo pairs were examined with respect to the reference LiDAR-derived DSM. The various DSMs were generated over the whole coverage of individual stereo pairs with different grid spacing and over three types of terrain; flat, mountainous and urban area. Root mean square errors of DSM from KOMPSAT-3A pair were larger than those for KOMPSAT-3. This seems due to larger convergence angle of the KOMPSAT-3A stereo pair.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

• The KIPS Transactions:PartD
• /
• v.14D no.5
• /
• pp.459-470
• /
• 2007

A data stream is a massive unbounded sequence of data elements continuously generated at a rapid rate. Query processing for such a data stream should also be continuous and rapid, which requires strict time and space constraints. In most DSMS(Data Stream Management System), the selection predicates of continuous queries are grouped or indexed to guarantee these constraints. This paper proposes a new scheme tailed an ASC(Attribute Selection Construct) that collectively evaluates selection predicates containing the same attribute in multiple continuous queries. An ASC contains valuable information, such as attribute usage status, partially pre calculated matching results and selectivity statistics for its multiple selection predicates. The processing order of those ASC's that are corresponding to the attributes of a base data stream can significantly influence the overall performance of multiple query evaluation. Consequently, a method of establishing an efficient evaluation order of multiple ASC's is also proposed. Finally, the performance of the proposed method is analyzed by a series of experiments to identify its various characteristics.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.81-84
• /
• 2005

유비쿼터스 의료 기술이 본격화되면서 센서 네트워크를 통해 환자의 건강 관련 데이터 스트림을 수집하여 위험상황을 탐지하고 지속적인 건강 상태를 모니터링할 수 있게 되었다. 그러나 방대한 양의 스트림 데이터로부터 의미 있는 데이터를 효과적으로 찾아내기 위해서는 실시간으로 데이터의 갱신과 집계 연산이 가능해야 하고 데이터의 압축이 효율적으로 처리 될 수 있는 다차원 저장구조가 필요하다. 기존의 다차원 데이터 분석 도구인 OLAP 큐브 저장구조는 실시간 업데이트가 힘들고, 스트림 데이터 저장 구조인 DSMS들은 다차원 데이터 분석이 용이하지 않다. 이에 본 연구에서는 건강 스트림 데이터의 특징과 질의를 분석하고, 이러한 스트림 데이터에 적합한 저장구조의 요건을 제시하였다. 또한 점진적 갱신이 가능하고, 대용량 데이터를 시간 차원으로 압축, 삭제하기 용이하며 실시간에 분석 데이터 구축이 가능한 저장구조를 제안하고 그 효율성을 보였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.499-506
• /
• 2003

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative subcycles. In analyzing or optimizing such a coupled system, it is essential to determine the best order of the processes within these subcycles to reduce design cycle time and cost. This is accomplished by decomposing large multidisciplinary problems into several sub design structure matrices (DSMs) and processing them in parallel This paper proposes a new method for parallel decomposition of multidisciplinary problems to improve design efficiency by using the multi-objective genetic algorithm and two sample test cases are presented to show the effect of the suggested decomposition method.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.24-27
• /
• 2003

High-resolution satellite images at sub-5m footprint are becoming increasingly available to the earth observation community and their respective clients. The related cameras are all using linear array CCD technology for image sensing. The possibility and need for accurate 3D object reconstruction requires a sophisticated camera model, being able to deal with such sensor geometry. We have recently developed a full suite of new methods and software for the precision processing of this kind of data. The software can accommodate images from IKONOS, QuickBird, ALOS PRISM, SPOT5 HRS and sensors of similar type to be expected in the future. We will report about the status of the software, the functionality and some new algorithmic approaches in support of the processing concept. The functionality will be verified by results from various pilot projects. We put particular emphasis on the automatic generation of DSMs, which can be done at sub-pixel accuracy and on the semi-automated generation of city models.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.302-307
• /
• 2007

RFID를 기반으로 유비쿼터스 환경의 응용 서비스를 지원하는 미들웨어는 지속적으로 끊임없이 입력되는 데이터를 정확하게 실시간으로 처리하고 응용 서비스에서 질의하는 결과를 획득해서 전달하여야 한다. 이와 같은 지속적으로 입력되는 대량의 데이터 스트림을 처리하기 위해서 데이터 스트림 관리 시스템(Data Stream Management System: DSMS)을 개발하기 위한 연구가 진행되고 있다. 기존에 연구되는 데이터 스트림에 대한 알고리즘은 대부분 연속 질의 결과들 사이의 평균 오차를 줄이고, 부하 발생 시 데이터의 우선순위에 따라 버리는 것에 초점이 맞추어져 있다. 본 논문에서는 RFID EPC 라는 데이터 특성에 맞추어 다중버퍼를 이용함으로써 고속의 데이터 처리 능력을 얻고, 각 버퍼마다 일정한 규칙을 통해 질의에 있어서도 빠른 대응을 할 수 있는 알고리즘을 제안한다. 본 논문은 현재 DSMS의 관련 연구와 고속 데이터 처리의 필요성을 말하고, 제안하는 알고리즘 설명과 시뮬레이션을 통해 단일버퍼와 다중버퍼일 경우 데이터 처리 속도 성능 평가와 제안한 알고리즘에 맞도록 버퍼가 생성 되는지 테스트하는 것으로 구성된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.177-180
• /
• 2010

RFID를 기반으로 유비쿼터스 환경의 응용 서비스를 지원하는 미들웨어는 지속적으로 끊임없이 입력되는 데이터 스트림을 실시간으로 처리하고 응용 서비스에서 요구하는 결과를 획득하여 전달해야 한다. 이와 같은 요구사항을 만족하기 위해 데이터 스트림 관리 시스템(DSMS)이 제안되었으며 다양한 연구가 시도되고 있다. 본 논문에서는 대량의 이벤트가 입력되는 환경에서 우선순위가 높은 질의를 실시간으로 처리하기 위한 DSMS를 제안하고 있다. 본 연구는 스탠포드의 STREAM 프로젝트를 활용하여 설계 및 구현하였으며, 각 쿼리를 State Thread로 동작시키는 방법을 이용하였다. 쓰레드 라이브러리의 스케줄러 부분을 실시간 스케줄러로 개선하는 작업을 진행하였으며, 실험을 통하여 쓰레드 스케줄러가 질의에 대해서 실시간으로 스케줄링을 할 수 있음을 보이고 있다.