• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.258-265
• /
• 2014

By replacing the previous metal connector on the joints of timber structure, the GFRP reinforced laminated wooden pin was produced using a wooden material and Glass fiber reinforced plastic(GFRP) composite laminate. In addition, using the reinforced wooden pin, the tensile type shear strength test was conducted. Based on the result of the bending strength test of the reinforced laminated wooden pin according to the GFRP arrangement, a specimen(Type-A) with a single insertion of GFRP for each layer have shown the most favorable performance. Also, it was verified that densified specimen hot pressed for an hour at the temperature of $150^{\circ}C$ and with the oppression pressure $1.96N/mm^2$ have shown the improved performance of 1.57 times than the specimen without the densification. And in the bending strength test considering the load direction, edgewise have shown a higher performance of 3.51 times than the flatwise. A shear strength test was conducted using the Type-A reinforced laminated wooden pin which have shown a moderate performance on the test. Based on the test conducted by differentiating the type of the joint plate and the connector, compared to the specimen(Type-DS) applied with the drift pin and steel plate, the specimen( Type-WL) applied with the GFRP reinforced laminated wooden pin and GFRP reinforced wooden laminated plate have shown 1.12 times higher shear strength and also have shown an excellent toughness even after the maximum load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.26-32
• /
• 2016

Usually, there are many uncertainties regarding the error of an assumed load, material properties, member size, and structure analysis in a structure, and it may have a direct influence on the qualities of optimal design of structures. Probabilistic analysis has developed rapidly into a desirable process and structural reliability analysis is an increasingly important tool that assists engineers to consider uncertainties during the design, construction and life of a structure to calculate its probability of failure. This study deals with the applications of two optimization techniques to solve the reliability-based optimization problem of structures. The reliability-based optimization problem was formulated as a minimization of the structural volume subject to the constraints on the values of componential reliability index determined by the AFOSM approach. This presented method may be a useful tool for the reliability-based design optimization of structures.

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.57-65
• /
• 2016

This study's purpose was to provide basic data for the monitoring of ecological changes caused by change of vegetation structure of Abies koreana forest in a study site susceptible to climatic change in Yeongsil area of Hallasan Mountain, Jeju Island. Surveys revealed this: in Yeongsil area of Hallasan Mountain, per 1 ha of A. koreana forests, total number 1,781, and A. koreana number 989, accounting for 55.5% of the total number of trees. 190 A. koreana or 19.2% were found to be dead. For the number of individual trees by DBH, trees standing 5 cm - 10 cm tall formed the largest portion at 39.9%, and in the case of other trees except A. koreana, the number of individual trees below 5 cm accounted for 23.5% of the total number of trees. The survey of importance by height revealed this: at the top level, the importance of A. koreana was the highest at 106.23, but the sum of importance of temperate deciduous broad-leaved trees (Prunus maximowiczii, Quercus mongolica, and Taxus cuspidata) was higher at 142.84 than that of A. koreana. The analysis of species diversity revealed 0.645 species diversity for the tree layer and 0.817 for the shrub layer; for evenness, 0.549 for the tree layer and 0.664 for the shrub layer; for dominance value; 0.451 for the tree layer and 0.336 for the shrub layer. The analysis of tree vitality revealed that for the A. koreana forests in Yeongsil, the composition ratio of A. koreana by type is AS type>AL type>DS type>DB type, and that of the other trees is AL type>AS type>AF type>AB type. Compared with the forests in other areas, the A. koreana forests in the Yeongsil area have a very high occurrence rate of dead trees, and a high importance of trees is shown in the deciduous broad-leaved tree forests. Compared with the A. koreana forests in the Jindallaebat area, with the same level above sea, the vegetation structures are fast changing. Also, due to dryness and other non-physical environmental changes caused by a lack of rainwater and dry winds in winter, dead trees are fast increasing in number. Environmental changes such as climate change diversely affect the maintenance of A. koreana in individual areas, and if environmental changes are fast and continue long, of the A. koreana forest areas in the Hallasan Mountain, the A. koreana forests in the Yeongsil area will decrease fastest in number and will experience changes in the vegetation structure. Thus, it is necessary to survey the vegetation changes in A. koreana forests, which are distributed in all directions but are centered on Hallasan Mountain, and to thus conduct long-term monitoring and research.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.267-276
• /
• 2010

This study was performed to obtain basic data about vegetation structure and site environment of rare and endangered plant, viola websteri in five natural habitats. The dominant species of Hongcheon habitat were Pyrus pyrifolia (tree layer), Morus bombycis (subtree layer), Pyrus pyrifolia (shrub layer) and Isodon inflexus (herb layer). Mt. Yeonin habitat were dominated by Quercus mongolica (tree layer), Morus bombycis (subtree layer), Philadelphus schrenckii (shrub layer) and Viola websteri (herb layer). Mt. Yumyung habitat were dominated by Cornus controversa (tree layer), Morus bombycis (subtree layer), Fraxinus rhynchophylla (shrub layer) and Adenocaulon himalaicum (herb layer). Mt. Daebu habitat were dominated by Acer mono (tree layer), Staphylea bumalda (subtree layer), Staphylea bumalda(shrub layer) and Dryopteris crassirhizoma (herb layer). And the dominant species of Mt. Worak habitat were Larix leptolepis (tree layer), Fraxinus rhynchophylla (subtree layer), Alangium platanifolium var. macrophylum (shrub layer) and Adenocaulon himalaicum (herb layer). It was found out that the average acidity of soil pH was 5.23; 0.30ds/m for electron conductivity; 12.6% for organic matter content; 0.68% for total nitrogen; 21.66 ppm for available phosphorous; and 23.45 cmol(+)/kg for CEC. Interchangeable cation was decreased in order of $Ca^{2+}$ > $Mg^{2+}$ > $K^{2+}$. Viola websteri had positive association with Polygonatum odoratum var. pluriflorum and Geranium thunbergii but negative association with Poa sphondylodes. Species diversity index(H'), maximum Species diversity index (H' max), evenness(J') and dominance (1-J'), of investigated sites ranged 0.6816 (Mt. Worak)~0.9656 (Mt. Daebu), 1.0000 (Mt. Yeonin)~1.3010 (Hongcheon, Gangwon), 0.5330 (Mt. Worak)~0.8947 (Mt. Daebu) and 0.1053 (Mt. Daebu)~0.4670 (Mt. Worak) in woody layer and 1.0414 (Mt. Yumyung)~1.3295 (Mt. Worak), 1.4314 (Mt. Yumyung)~1.6435 (Mt. Daebu), 0.6984 (Hongcheon, Gangwon)~0.8356 (Mt. Worak) and 0.1644 (Mt. Worak)~0.3016 (Hongcheon, Gangwon) in herb layer, respectively.

• Korean Journal of Plant Resources
• /
• v.35 no.5
• /
• pp.594-606
• /
• 2022

This study was conducted to figure out the environment factors including vegetation structure and soil characteristics in natural habitats of Sageretia thea, and offers the basic information for habitats conservation and proliferation. The natural habitats of Sageretia thea were located at altitudes between 0~370 m with inclinations ranged as 3~35°. Through the vegetation research, the dominant species of tree layers were found to be divided into four communities. Cornus macrophylla (Com. I), Pinus thunbergii - Cinnamomum camphora (Com. II), Machilus thunbergii (Com. III), and Pinus thunbergii (Com. IV). The Species diversity (H') was 1.397~1.455, evenness (J') was 0.972~0.986, and dominance (D) was found to be 0.014~0.028. As a result of the physicochemical characteristics of soils, habitats soil mainly consisted of sandy soil and sandy loam soil. The average soil pH was 5.28~5.98, electronic conductivity was 0.22~63 ds/m, soil organic matter was 13.33~19.33 cmol⁺/kg, Exchange cations were appeared in the order of Ca²⁺, Mg²⁺, K⁺, and Na⁺. The Ordination result showed that Correlation coefficient between communities and environmental factors were significantly correlated with 4 main factors altitude, electronic conductivity, cation exchange capacity, exchangeable Na⁺. As expected, The result of this study will be helpful information on the preservation and mass production for use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

The Internet of Things (IoT) is an environment in which various devices provide services to users through communications. Because of the nature of the IoT, data are stored and distributed in heterogeneous information systems. In this situation, IoT end applications should be able to access data without having information on where the data are or what the type of storage is. This mechanism is called Service Discovery (SD). However, some problems arise, since the current SD architectures search for data in physical devices. First, turnaround time increases from searching for services based on physical location. Second, there is a need for a data structure to manage devices and services separately. These increase the administrator's service configuration complexity. As a result, the device-oriented SD structure is not suitable to the IoT. Therefore, we propose an SD structure called Name-based Service-centric Service Discovery (NSSD). NSSD provides name-based centralized SD and uses the IoT edge gateway as a cache server to speed up service discovery. Simulation results show that NSSD provides about twice the improvement in average turnaround time, compared to existing domain name system and distributed hash table SD architectures.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.369-375
• /
• 2004

In this study, liquid crystalline (LC) is formed using Gemini surfactant (GS) type and moisturizing effect in vivo is measured. $3.0\;wt\%$ of sodium dicocoyl ethylene diamine (PEG)-15 sulfate (SCD-PEG-15S) is used as GS and $4.0\;wt\%$ of hydrogenated dimer acid esters (HDAE) as booster. For stabilizers, $2.0\;wt\%$ of behenyl alcohol (BA) and $1.0\;wt\%$ of Iyso-lecithin (LyL) are utilized. It is stabilized in pH from 4.0 to 10.5 and the best condition is in pH 6.5. The value of viscosity is $8,000\pm500$ cP. The most excellent particles are formed within the range of 4.0 to 15.5 um. Formed LC is observed around LC particles using polarization microscope. It is also observed that lamellar gel network structure is formed around LC particles. Moisturizing effect is improved by $13.6\%$ (P<0.05) compared to control when measured 30 min later after coating samples. After 1 h, moisturizing effect is improved by 1$12.6\%$ (P<0.05) than control while showing $28.3\%$ (P<0.05) of improvement after 4 h. These results may be caused from that manufactured LC forms lamellar structure so that it has better water-holding ability and absorbance of oil increases. This formula could be utilized by delivery system (DS) on skin so that this technology can be applied for manufactuing pharmaceuticals and cosmetics.

• The Korean Journal of Ecology
• /
• v.19 no.5
• /
• pp.417-430
• /
• 1996

This study was conducted to investigate the developmental process of plant community during the secondary succession and the dynamics of soil properties in the burned and unburned areas of Mt. Ch’oly-san. Owing to the forest fire occurred on April, 1989, the red pine(Pinus densiflora) forest and its floor vegetation were burned down. The floristic composition of burned and unburned areas were composed of 53 and 49 species of vascular plants, respectively. The dominant species based on SDR4 of the burned sites were lespedeza cyrtobotrya (89.62), Miscanthus sinensis var. purpurascens (62.50), and Carex humilis (58.73), Quercus serrata (43.33). In contrast, Pinus densiflora (83.56), Lespedeza cyrtobotrya (55.57), Miscanthus sinensis var. purpurascens (51.88) and Carex humilis (50.41) were dominant in the unburned area. The biological spectra showed the $H-D_1-R_5-e$ type in both the burned and unburned areas. The indices of similarity ($CC_S$) between the two areas were 0.74. Degree of succession (DS) was 604 in the burned area and 802 in the unburned area. From these facts, it is assumed that the succession is rapidly progressing because of the recovery of vegetation. The species diversity ($\={H}$) and evenness index(C) in the burned and unburned areas were 0.15 and 0.18, respectively. Red pine tree did not resprout after scorch by the forest fire, but Lespedeza, Quercus, Rhododendron, Albizzia, and Zanthoxylum resprouted from the roots and trunks after the forest fire. It seems that these species are the fire-resistant species. Soil properties such as soil pH, content of organic matter, available phosphous, total nitrogen, tatal carbon, exchangeable potssium, sodium, calcium, and magnesium increased due to forest fire. These results suggest the intensity of forest fire in the study area was relatively weak. Monthly changes of soil properties were of little significance except for some cases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.445-454
• /
• 2020

Non-breakaway crashworthy sliding posts move rigidly with a vehicle in the early stage of vehicle impact. During this stage, a vehicle imparts its linear momentum to the post, experiencing first-stage speed loss followed by second-stage loss from the crush of the energy-absorbing pipe (EAP) installed under the guide rail. An EAP is the key element of a crashworthy sliding post and should be confined to the post foundation. This paper covers the development of an EAP for a sliding post of 507 kg, which is a sliding post type frequently used in Korea for cantilever signs. Detailed explanations of the designs for an EAP structure using LS-DYNA impact simulation are given, and the crashworthiness of the systems are confirmed through crash tests. The EAP presented in this paper can accommodate impacts from 0.9 ton-60 km/h to 1.3 ton-80 km/h, and is applicable to foundations up to 2.7 m in length.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2474-2480
• /
• 2013

A stress ribbon pedestrian bridge is the structure in which the axial force of prestressed deck, which is developed by introducing prestressed force into the thin deck with the very low value of span to deck-depth ratio which is installed on bearing cables with the specified sag, resists most of external loadings. Since the design of stress ribbon pedestrian bridges should be conducted by assuming the cross-section of deck, the area of bearing cables and post-tensioning cables, and the prestressed force of post-tensioning cables, it requires much more iterative processes than the design of general bridges. In this research, to minimize such iteration processes, regression equations which can reasonably assume the area of bearing cables and post-tensioning cables, and the prestressed force of post-tensioning cables, are suggested for the bridge length of 80m with the sag-span ratios of 1/30, 1/40, and 1/50.