• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.329-329
• /
• 2017

The study was conducted to investigate the effects of different harvesting time on pasting properties of starch in three colored rices. Seven major parameters of starch pasting properties, peak viscosity (PKV), hot pasting viscosity (HPV), cool pasting viscosity (CPV), setback (CPV minus PKV), breakdown (PKV minus HPV), peak time, and pasting time were determined by Rapid Visco Analyzer. The peak viscosity, hot viscosity, cool viscosity and peak time were influenced by different harvesting times. Pasting time was delayed slightly with prolonged harvesting time in all rice cultivars. Pasting temperature in each rice cultivar differed from each harvesting time, and pasting temperature of the two rice cultivars, Hongjinju and Joseongheugchal, showed the highest at the 40 days after heading and then it decreased at the final harvesting time. With the delay of the harvesting time, peak viscosity, hot viscosity, cool viscosity, setback value and pasting temperature did not exhibit a regular trend depending on their genetic characteristics. Branch chain length distribution of amylopectin was demonstrated a distinct difference among these colored rices. In changes of amylopectin branch chain-length distribution, the amylopectin structure of Hongjinju rice cultivar as affected by different harvesting time, the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant increase in A chains with $DP{\geq}12$ and remarked decrease in long chains $37{\leq}DP$ compared to that of 30, 40, and 50 days after heading. In particular, when harvesting time is delayed the distribution percentage of short chain (A chains with $DP{\geq}12$) was increased except for the rice which harvested 20 days after heading. The similar results were also observed in Sintoheugmi rice cultivar like that of Hongjinju rice cultivar. Otherwise, distribution percentage of the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant decrease in A chains with $DP{\geq}12$ and remarked increase in B chains $13{\leq}DP{\geq}24$ compared to that of 30, 40, and 50 days after heading.

• 한국식품영양학회지
• /
• 제31권2호
• /
• pp.278-283
• /
• 2018

The objective of this study was to evaluate quality properties of high quality rice. Seven rice varieties, Dabo, Daebo, Samkwang, Sindongjin, Sukwang, Jinsumi, and Haiami, were investigated for proximate contents and physicochemical characteristics. Moisture content was highest in the Jinsumi (13.13%). Protein and lipid content was highest in the Haiami. The amylose content of the rice cultivars was 20.15~22.51%. The degree of amylopectin polymerization (DP) was analyzed, and in all cultivars, DP 13-24 content was found to be highest, at more than 53%, whereas DP ${\geq}37$ content was lowest, at less than 5.81%. With regard to free sugar, maltose content in rice was the highest (${\geq}46%$). Toyo value of rice was highest in Samkwang, Daebo, and Jimsumi. Palatability characteristics were highest in Daebo and Jimsumi. Thus, the results of this study suggested that Samkwang, Daebo, and Jinsumi can be effectively used as processed cooked rice, though further studies should be required regarding changes in the quality of rice after cooking.

• 산업경영시스템학회지
• /
• 제33권1호
• /
• pp.17-23
• /
• 2010

The corporate R&D(Research and Development) has a primary role of new product development and its potential is the most crucial factor to estimate corporate future value. However, its systemic inadequacies and inefficiencies, the shorten product life-cycle to satisfy customer needs, the global operations by outsourcing strategy, and the reduction of product cost, are starting to expose to R&D business processes. The three-phased execution strategy for R&D innovation is introduced to establish master plan for new R&D model. From information technology point of view, PLM(Product Life-cycle Management) is one of the business total solutions in product development area. It is not a system, but the strategic business approach that collaboratively manage the product from beginning stage to end of life in all business areas PLM functions and capabilities are usually used as references to re-design new R&D process. BPA(Business Process Assessment) and 5DP(Design Parameters) in PI6sigma developed by Samsung SDS Consulting division are introduced to establish R&D master plan and re-design process respectively. This research provides a case study for R&D process innovation. How process assessment and PMM(Process Maturity Model) can be applied in business processes, and also it explains process re-design by 5DP method.

• 동아시아식생활학회지
• /
• 제15권1호
• /
• pp.78-90
• /
• 2005

The purpose of this study was to make ramyon from Korean cultured wheat by adding with hot water extract powder from safflower seed in order to add the value of it. The cooking quality, instrumental texture and sensory characteristics of ramyon were analyzed. The ramyons with 0.1%, 0.3%, 0.5%, and 0.7% of hot water extract powder(HEP) from safflower seed, control, and those with 3% and 5% of dried powder(DP) from safflower seed were compared. The yield of HEP was 7.8%. Lightness, redness, Max. weight, strength, hardness, adhesiveness, cohesiveness and springiness were measured. As the amounts of HEP and DP was increasing, ramyons smelled stronger and was getting harder and chewier, while became less transparent and had no difference in elasticity and adhesiveness. In overall acceptability, both control and ramyon with HEP had similar points. From three important factors, appearance, color and smell to make ramyon more acceptable, addition of 0.3～0.5% of hot water extract powder from safflower seed was found to be the best. However, further studies on smells are needed to make processed foodstuffs with safflower seed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.269-273
• /
• 2003

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.284-290
• /
• 2017

The glyoxal has been used as formaldehyde free DP(durable press) agents in wrinkle free treatment for cotton fabrics. However, the yellowing problem is a disadvantage of DP finishing process for cotton fabrics with glyoxal. In order to improve the whiteness, it was investigated that the effect of coreactant and treatment method with various whitening additives such as STB(sodium tetraborate, $Na_2B_4O_7$), SPB(sodium perborate, $NaBO_3$), SC(sodium chlorite, $NaClO_2$) and SPC(sodium percarbonate, $Na_2CO_3{\cdot}1.5$ $H_2O_2$). The increasing the concentration of whitening additives(STB, SPB, SC and SPC), the whiteness and the strength retention ratio of cotton fabrics were increased but the wrinkle recovery angles were decreased in one bath method. It was not suitable to improve whiteness because the whiteness value is about 60. In the case of SC used two bath method, the whiteness is near 70, which is similar to untreated fabrics, without decreasing of WRA and strength.

• Journal of Welding and Joining
• /
• 제30권2호
• /
• pp.76-80
• /
• 2012

In this study, the effect of the welding current on the hardness characteristics and microstructure in the resistance spot welding of 1GPa grade cold-rolled DP steel was investigated, Also, correlation between the hardness and microstructure was discussed. In spite of the change in the welding current, the hardness distributions near weld was similar. the hardness in the HAZ and the fusion zone was higher than that of the base metal and the hardness in the fusion zone was variated with the location. Especially, the hardness of HAZ adjacent to the base metal showed maximum value, and softening zone in the base metal adjacent to HAZ was found. With the increasing of welding current, there were no difference in maximum hardness and average hardness in the fusion zone were, but the hardness of the softening zone reduced. The difference in the hardness in each location of weld due to grain size of prior austenite. The softening of the base metal occurred by tempering of the martensite.

• 소성∙가공
• /
• 제13권1호
• /
• pp.84-89
• /
• 2004

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• 한국분무공학회지
• /
• 제3권1호
• /
• pp.19-26
• /
• 1998

The effect of mixture component makes a nelay time and a long total combustion period $\tau_{p\;max}$. The flame propagation delay $\tau_{df}$ was determined by the record of current ion. The pressure release delay $\tau_{dp}$ and $\tau_{p\;max}$ were determined by the indicated pressure diagram in constant volume of the combustion chamber. The results are as follows: 1) The ignition delay $\tau_t$ time takes the minimum value around $\Phi=1.15$. 2) $\tau_{df}$ and $\tau_t$ time increased according to the increases of the concentrated dilution gases, because the adiabatic flame temperature decreased due to the increases of the heat capacity. But dilution gases have little effect on flame nucleus formation delay 3) The relation between $\tau_t$ time and reciprocal laminar burning velocity is almost linear. 4) The increase of the propagation length is accompanied with increased ratio of the $\tau_{df},\;\tau_{dp},\;\tau_{t},\;\tau_{p\;max}$.

• 한국정보처리학회논문지
• /
• 제3권3호
• /
• pp.683-695
• /
• 1996

본 논문에서는 화상내 객체의 윤곽정보를 얻고 객체내의 선분을 추출하여 이를 인덱싱하고 매칭하는 내용기반 화상정보 검색시스템을 구현하였다. 이를위해 선분추출 방법으로서 기존의 SLHT(Straight Line Hough Transform)의 단점을 개선시켜 FSLHT(Flexible SLHT) 를 제안하고 그 유효성을 입증하였으며, 선분에 의한 화상간의 유사도를 얻기 위해 (DP(Dynamic Programming) 알고리즘을 적용하였다. 윤곽특징을 고려할 때 화상의 윤곽이 잡음에 민감하게 반응하는 문제를 보완하기 위하여 일정간격으로 샘플링한 영역의 대 표값을 윤곽 특징으로 취하였으며, Hough 변환에 의한 선분 추출시 시각적인지에 기반한 방향성을 산출하여 변환함으로써 연속성상실 문제와 시간문제를 보완하였다.