• Journal of Mechanical Science and Technology
• /
• v.17 no.9
• /
• pp.1339-1348
• /
• 2003

Several factors, including peak dp/dt of the ventricular pressure and maximum closing velocity of leaflet have been studied as indices of the cavitation threshold. In the present study, just before closing velocity of the leaflet has been studied as indices of the cavitation threshold, and cavitation erosion on the surface of a mechanical valve was examined by focusing on squeeze flow and the water hammer phenomenon during the closing period of the valve. A simple solenoid-actuated test device that can directly control the valve closing velocity was developed, and opening-closing tests of 3,000 and 40,000 cycles were performed at various closing velocities. There was a closing velocity threshold to occur erosion pitting of valve surface, and its value was about 0.4 m/s in this study. Cavitation-induced erosion pits were observed only in regions where squeeze flow occurred immediately before valve closure On the other hand, the number of the pits was found to be closely related to an area of water hammer-induced pressure wave below the critical pressure defined by water vapor pressure. Therefore, it was concluded that cavitation is initiated and augmented by the two pressure drops due to squeeze flow and water hammer phenomenon, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.4
• /
• pp.300-308
• /
• 2015

With the increases in oil and gas prices, and energy consumption, drillship construction has increased during the last decade. A drillship using a dynamic positioning (DP) system to maintain its position and heading angle during drilling operations. In addition, a drillship is equipped with a moonpool structure to allow its drilling systems to be operated in the midship section. A drillship for the North Sea is specially designed to endure harsh environmental loads. For safe operation in the North Sea, the drillship should have good motion response and robust hull strength. A break water should be considered on the bow and side deck to prevent the green water on deck phenomenon from incoming waves. In addition, the moonpool should be designed to reduce the speed loss and resonance motion. In this study, the hydrodynamic characteristics of a drillship for the North Sea were examined in relation to the motion, wave loads, green water, and moonpool resonance in the initial design stage.

• Journal of Korea Multimedia Society
• /
• v.18 no.3
• /
• pp.298-311
• /
• 2015

Vector data represents a map by its coordinate and Raster data represents a map by its pixel. Since these data types have very large data size, data compression procedure is a compulsory process. This paper compare the results from three different methodologies; GIS (Geographic Information System) vector map data compression using DP(Douglas-Peucker) Simplification algorithm, vector data compression based on Bin classification and the combination between two previous methods. The results shows that the combination between the two methods have the best performance among the three tested methods. The proposed method can achieve 4-9% compression ratio while the other methods show a lower performance.

• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.115-125
• /
• 1996

A total of 315 microorgainisms were isolated from 256 pneumonic lung samples of pig in abattoirs of northern Chungnam area during February to November 1994, and Identified 97 strains as Pusteurella multocida, 89 strains as Staphylococcus spp, 54 strains as Streptococcus spp, 22 strains as Mycoplasma spp, 21 strains as Escherichia coli, 18 strains as Haemophilus parsuis, 11 strains as Corymebacteroi, pyogenes, and 3 strains as Acrinobacillus spp by Gram's and Dienes stain, and biological properties test Involved API system. After that, they were examined anti biotic susceptibility for ampicillin(AM), cephalothin(CF), chloramphenicol(CP), erythromycin(EM), kanamycin(KM), gentamicin(GM), neomycin(NM), penicillin(PC), streptomycin(SM), tetracycline(TE), tiamulin(TIA), tylosin(TYL), methicillin(DP), colistin(CL) and trimet hoprim(SXT). In antibiotics susceptibility test, 293 isolates except Mycoplasma spp 22 strain were highly susceptible to DF(79.2%) and AM(76.2%), but resistant to PC(14.0%), NM(19.5%) and KM (23.2%) The multiple drug resistant patterns were noted in most isolates, whereas only 7 isolates resistant to single drugs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.120-128
• /
• 2015

Quality function deployment (QFD) is a useful method in product design and development to maximize customer satisfaction. In the QFD, the technical attributes (TAs) affecting the product performance are identified, and product performance is improved to optimize customer requirements (CRs). For product development, determining the optimal levels of TAs is crucial during QFD optimization. Many optimization methods have been proposed to obtain the optimal levels of TAs in QFD. In these studies, the levels of TAs are assumed to be continuous while they are often taken as discrete in real world application. Another assumption in QFD optimization is that the requirements of the heterogeneous customers can be generalized and hence only one house of quality (HoQ) is used to connect with CRs. However, customers often have various requirements and preferences on a product. Therefore, a product market can be partitioned into several market segments, each of which contains a number of customers with homogeneous preferences. To overcome these problems, this paper proposes an optimization approach to find the optimal set of TAs under multi-segment market. Dynamic Programming (DP) methodology is developed to maximize the overall customer satisfaction for the market considering the weights of importance of different segments. Finally, a case study is provided for illustrating the proposed optimization approach.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.613-616
• /
• 2006

본 연구에서는 신 수요관리 기법인 DR(Demand Response)시스템의 개발 및 운영현황을 알아 보았다. 특히 DR 시스템의 구성 방안과 각 모듈들의 설계시 검토 및 요구 사항을 분석하였다. 그리고 공급자와 수요자를 잇는 네트워크는 국가전력 IT과제에서 Portal의 개념을 도입하여 CP(Consumer Portal) 및 DP(Device Portal)에 의한 채널의 표준화를 시도하고 있다. DR의 개념은 수요관리와 가격 응답으로 공급자의 관리 기능과 가격 또는 인센티브 등이 제공되는 수요자가 참여하는 서비스의 양면을 가지고 있다. 이와 같은 시스템이 개발될 경우에는 전력사와 소비자 사이의 양방향 통신 채널이 형성되고 따라서 실시간 수요의 측정이 가능해진다. 또한 이를 토대로 DR 시스템을 사전 검토 및 계획상의 문제점을 분석하여 한국형 DR 시스템의 개발에 대한 기반을 조성하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.987-990
• /
• 2003

산업현장에서의 인터넷환경 및 원격 제어를 위한 시스템 개발에서 신뢰성이 있고 경제적이며 지능적인 Power Supply가 요구되고 있다. 최근 통신시스템의 Power Supply는 수 kA이상의 출력전류를 가지고 있으며 최소 10개 이상의 모듈로 이루어져 있다. High-End 서버 시스템과 같이 수백 개의 마이크로프로세서를 내장한 시스템은 수십 kW의 전력을 소모한다. 이들이 사용하는 Power Supply는 별도의 시스템 제어기와의 통신으로 시스템에서 발생하는 발열, 소모전력, Total Harmonic Distortion (THD)에 대한 정보를 바탕으로 시스템이 갖는 각각의 Module에 대해 효과적이고 신뢰성 있는 전력공급을 하여야 만다. Distributed Power System (DPS)에서 가장 중요만 역할을 담당하는 Power Factor Correction (PFC) AC-DC Converter의 디지털 제어는 시스템 제어기와의 통신능력을 충분히 고려하면서 DPS를 위한 적합한 솔루션을 제공할 것이다. 본 논문에서는 Digital Signal Processor (DSP)를 사용하여 PFC 제어에 필요한 전파정류전압, 입력전류, 출력전압을 계측하여 역률개선과 THD의 저감을 위한 전류의 추종을 제어하면서 이들 제어기에서의 파라미터를 PC를 통해 모니터하여 최근의 추세를 만족시킬 수 있는 시스템을 구현할 수 있을 것으로 사료된다.

• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.108-117
• /
• 2022

The recent development of information and communication technology has a great impact on the audio/video industry. In particular, IP-based AoIP transmission technology and AVB technology are making changes in the audio/video market. Video signal transmission technology has been introduced to the market through a network, but it has not replaced the video switcher function. Video signals in the conference room or classroom are still controlled by the switching device. In order to switch input/output video devices, a cable that is not limited by distance must be connected to the switcher. In addition, the control of the switching device must be performed by a person who has received professional training. In this paper, it is a technology that can be operated even by non-experts by replacing complex video cables (RGB, DVI, HDMI, DP) with LAN cables and enabling IP-based video switching and transmission (Video Mirroring over IP: VMoIP) to replace video switcher equipment. We are going to do this study, I/O videos were controlled in the form of matrix and high-definition videos were transmitted without distortion, and VMoIP is expected to become the standard for video switching systems in the future.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.617-625
• /
• 2001

Peace dam constructed against the water attack had stopped in the first step, linked with Hwacheon dam through bypass tunnels and had an effect of flood surcharging in its pocket on Hwacheon dam downstream. To study the utility of Peace dam, the flood control effects of Peace dam and the restricted water level (RWL) in Hwacheon dam were reviewed and identified with operating Hwacheon dam system. Analysing the results the ideas of expanding the usability of the water resources in Hwacheon dam system were suggested. To do that, the criteria and the model of reservoir operation were established frist and the optimization of the operation have done. Based on the results the performance of the optimization was evaluated as an reference coefficient with relative value of the registered data to the optimized. And examining several alternatives for the RWL in Hwacheon reservoir operation made more feasible RWL suggested. And its economic benefit was also reckoned.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.1044-1055
• /
• 2015

DPCap analysis can assist in determining the maximum environmental forces the DP system can counteract for a given heading. DPCap analysis results are highly affected by the thrust forces provided by the thrust system which consists of several kinds of thrusters. The thrust forces and moment are determined by the maximum thrust of the thrusters as well as the thruster configuration. In this paper, a novel local optimization of thruster configuration based on a synthesized positioning capability criterion is proposed. The combination of the discrete locations of the thrusters forms the thruster configuration and is the input, and the synthesized positioning capability is the output. The quantified synthesized positioning capability of the corresponding thruster configuration can be generated as the output. The optimal thruster configuration is the one which makes the vessel has the best positioning capability. A software program was developed based on the present study. A local optimization of thruster configuration for a supply vessel was performed to demonstrate the effectiveness and efficiency of the program. Even though the program cannot find the global optimal thruster configuration, its high efficiency makes it essentially practical in an engineering point. It may be used as a marine research tool and give guidance to the designer of the thrust system.