• 한국의류학회지
• /
• 제24권3호
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.

• 한국의류학회지
• /
• 제26권12호
• /
• pp.1749-1755
• /
• 2002

본연구의 목적은DP가공에 의한 가교화를 통해 텐셀의 피브릴화를 조절할 때 DP가공 방법 및 NaOH전처리 효과를 물성, 표면형태, 역학적 성질 및 태의 변화의 관점에서 고찰하는데 있다. SEM 분석결과DP가공에 의해 피브릴 발생 정도는 감소하였다. DP가공 방법에 있어 서 WF법과 PDC법에 따른 물성의 차이는 나타나지 않았다. 역학적특성의 경우 DP가공은 DP가공 방법에 상관없이 효소처리한 직물의 인장선형성에는 큰 영 향을 주지 않았으나 인장에 너지, 굽힘 강성, 압축선형성, 압축 레질리언스, 기하학적 거칠기는 감소시켰고 인장 레질리언스, 굽힘이력, 압축에너지는 증가시켰다. 전단특성은 WF법에서는 증가한 반면, PDC법에서는 감소하여 DP가공 방법에 따른 차이를 나타내었다. WF법이 PDC법보다 더 높은 Koshi, Numeri, Fukurami 값을 보였으며, 종합태 값은 비슷하게 나타났다. NaOH 전처 리에 의해 수지부착량은 감소하였으나 감량률은 증가하였으며, DP성/물성은 더 낮게 나타났다. NaOH 전처리에 의해 인장선형성, 인장에너지, 압축 레질리언스, 전단 및 굽힘특성은 증가하였으나 인장레질리언스와 압축선형성, 압축에너지, 표면특성은 감소하였다. NaOH 전처리한 경우 Koshi는 증가하였고, Numrei와 Fukuramil는 감소하였으며, 종합태 값은 가장 낮았다. 처리한 시료들은 각각 다른 감성과 촉감을 나타냈다.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.24-31
• /
• 1998

The effects of DMDHEU alone and DMDHEU/Fluorochemical(FC) combined treatment on the physical properties of 75％/25％ cotton/polyester(CP) blended fabrics were investigated. FC water repellent and DMDHEU durable press finishes were applied in combination to CP fabrics to provide good water repellency as well as great durable press(DP) performance. The physical properties of the fabrics were evaluated by wrinkle recovery angle(WRA), DP performance, contact angle, demand wettability, and water repellency. The durable press/water repellent finished(DP/WR) CP fabrics show considerably improved WRA and DP performance. The DP/WR finishes do not change the water contact angie of polyester fibers significantly, while the DP finishes increase it. Both DP and DP/WR finishes increase the contact angle of cotton fibers. The water uptake amount increases in the following order : DP/WR cotton, DP/WR CP＜DP cotton, DP CP ＜ Control CP, Control cotton. The water uptake amount increases in the following order DP/WR CP, DP/WR cotton ＜DP cotton ＜DP CP＜Control CP, Control cotton. Considerable improvements for water repellency are imparted to the CP fabrics treated with DP/WR, and the level of improvement is not significantly different from that of the DP/WR cotton fabrics. These results lead to the conclusion that DP/YVR treatments a single pad bath on CP are effective finishes for improving both DP performance and water repellency.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.429-430
• /
• 2003

Durable Finish(DP) 가공은 면직물이나 의복의 구김 방지성을 주기 위해 널리 사용되어진다 이는 비결정부분에 위치한 셀룰로오즈 분자의 체인 사이에 수지가 가교결합을 형성하여(Figure 1) 네트워크 형태의 거대 분자구조를 만들고 체인간의 움직임을 억제하여 섬유가 뻣뻣하게 된다. 이로 인해 면섬유의 인장강도, 인열강도 등 물리적 강도가 심각하게 저하된다. 본 논문에서는 현재 durable finishing에 가장 많이 사용하는 Dimethylol Dihydroxy Ethylene Urea(DMDHEU)를 이용한 DP 가공 면직물의 강도저하를 관찰하고 선택된 효소처리가 강도회복에 미치는 영향을 연구하였다. (중략)

• 한국의류학회지
• /
• 제22권7호
• /
• pp.911-919
• /
• 1998

부탄테트라카르복실 산을 이용한 면직물의 DP 가공에서 가장 효과적인 촉매로 알려진 sodium hypophosphite(SHP)를 대체하기 위하여 carbodiimide 촉매의 효과를 알아보았다. Carbo야-imide 촉매로는 cyanamide(CY), dicyandiamide(DCY)와 disodium cyanamide(DSC)를 사용하였다. DCY와 DSC가 일반적으로 CY보다 좋은 방추도와 방축도 등을 보였고 또한 독성이 낮고 저장시 안정도 등이 우수하므로 산업적인 응용이 가능하다. 필요한 방추도와 물리적성질의 균형을 위해서 가공욕의 pH 조절이 가장 중요한 인자로 나타났다. 촉매존재시에 면과 부탄테트라카르복실산의 에스터화 가교 반응 메커니즘을 제아하였다. 또한 황화 염료로 염색된 염색포에 대한 가공 효과 분석시 carbodiimide 촉매가 SHP 보다 대체로 작은 색상 변화를 유발시켰다. 이러한 연구 결과는 부양화와 여러 염료의 색상 변화를 유발시키는 SHP를 사용하지 않고 부탄테트라카르복실 산과 carbodiimide 촉매를 이용한 무포름알데히드, 무인 가공제의 면직물 DP 가공의 가능성을 보여 주고 있다.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.41-47
• /
• 2019

PURPOSE. Surface finishing of a zirconia restoration is essential after clinical adjustment. Herein, we investigated the effects of a surface finishing protocol for monolithic zirconia on final roughness and bacterial adherence. MATERIALS AND METHODS. Forty-eight disk-shaped monolithic zirconia specimens were fabricated and divided into four groups (n = 12) based on initial surface treatment, finishing, and polishing protocols: diamond bur+polishing bur (DP group), diamond bur+stone grinding bur+polishing bur (DSP group), no diamond bur+polishing bur (NP group), and no diamond bur+stone grinding bur+polishing bur (NSP group). Initial and final surface roughness was measured with a profilometer, and shown using scanning electron microscope. Bacterial adhesion was evaluated by quantifying Streptococcus mutans in the biofilm. Kruskal-Wallis and Mann-Whitney U tests were used to compare results among groups, and two-way analysis of variance was used to evaluate the effects of grinding burs on final roughness (${\alpha}=.05$). RESULTS. The DP group had the highest final Ra value, followed by the DSP, NP, and NSP groups. Use of the stone grinding bur as a coarse-finishing step significantly decreased final Ra values when a diamond bur was used (P<.001). Omission of the stone grinding bur increased biofilm formation on specimen surfaces. Combining a stone grinding bur with silicone polishing burs produced the smallest final biofilm values, regardless of the use of a diamond bur in initial surface treatment. CONCLUSION. Coarse finishing of monolithic zirconia with a stone grinding bur significantly decreased final Ra values and bacterial biofilm formation when surfaces had been roughened by a diamond bur.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.18-22
• /
• 2001

Effects of cationic surfactants old the wetting behavior of the DMDHEU treated cotton fibers were investigated using a technique based on the Wilhelmy principle. The results indicated that Interactions between the fiber and water ill the interface make contributions to wettability of the cotton fiber surface because of reorientation of polar groups at the interface. The effects of types and concentration of cationic surfactant on the wettability of both control and durable press(DP) finished cotton fiber are discussed. Below and near the critical micelle concentration(cmc), the adsorption of hexadecyltrimethylammoniumbromide(HTAB) on the control fiber makes the fiber surface more hydrophobic. Near and above the cmc of octadecyltrimethylammouniumbromide(OTAB) , the decrease in advancing contact angles indicates that the control cotton surface became hydrophilic. By the adsorption of both HTAB and OTAB onto the fiber surface, the hydrophobicity of the DP finished fiber surface became mere hydrophilic.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.284-290
• /
• 2017

The glyoxal has been used as formaldehyde free DP(durable press) agents in wrinkle free treatment for cotton fabrics. However, the yellowing problem is a disadvantage of DP finishing process for cotton fabrics with glyoxal. In order to improve the whiteness, it was investigated that the effect of coreactant and treatment method with various whitening additives such as STB(sodium tetraborate, $Na_2B_4O_7$), SPB(sodium perborate, $NaBO_3$), SC(sodium chlorite, $NaClO_2$) and SPC(sodium percarbonate, $Na_2CO_3{\cdot}1.5$ $H_2O_2$). The increasing the concentration of whitening additives(STB, SPB, SC and SPC), the whiteness and the strength retention ratio of cotton fabrics were increased but the wrinkle recovery angles were decreased in one bath method. It was not suitable to improve whiteness because the whiteness value is about 60. In the case of SC used two bath method, the whiteness is near 70, which is similar to untreated fabrics, without decreasing of WRA and strength.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.171-172
• /
• 2007

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.187-193
• /
• 2010

The effects of molecular weight (MW) and concentration on the rheological properties of poly(vinyl alcohol) (PVA) solutions in dimethyl sulfoxide (DMSO) were investigated at $30^{\circ}C$. Ubbelohde viscometer and rotational rheometer were employed for dilute and concentrated regime, respectively. In the dilute regime, the Mark-Houwink exponent ($\alpha$) of the solutions determined from three different MWs proved 0.73. The critical concentration (C*), in which the entanglement and overlap of polymer molecules began to take place, decreased with increasing the MW of PVA. Huggins constant ($K_H$) values ranged from 0.33 to 0.45 over the MW examined. In the log-log plot of $\eta_{sp}$ versus [$\eta$]C, the PVA with higher degree of polymerization (DP) gave a greater slope exhibiting the inflection point in the vicinity of C*. In the dynamic viscosity ($\eta'$) curve, the PVA solutions of DP 1700 presented Newtonian fluid behavior over most of the frequency range examined. However, the lower Newtonian flow region reduced with increasing the DP. As the PVA concentration increased, $\eta'$ was increased and the onset shear rate for pseudoplasticity was decreased. In the Cole-Cole plot, PVA solutions showed almost a single master curve in a slope of ca. 1.65 regardless of the DP. However, the increase of the concentration from 8 to 12 wt% for PVA solutions of DP 5000 decreased the slope from 1.73 to 1.57. In the tan $\delta$ curve, the onset frequency for sol-gel transition was shifted from 154 to 92 rad/s with increasing the DP from 3300 to 5000 and from 192 to 46 rad/s with increasing the concentration from 8 to 12 wt%. In addition, longer relaxation time ($\lambda$) was observed with increasing the DP and concentration.