• The Journal of Korean Physical Therapy
• /
• v.16 no.2
• /
• pp.108-115
• /
• 2004

The aim of this study is to present the basic reference data of age and specipic gait parameters for comparisons of the gait characteristics depended on Unilateral Trans-Femoral or Trans-Tibial Prostheses. The basic gait parameters were extracted from 10 Adult, 10 above knee(A/K) patients and 10 below knee(B/K) patients, 50 to 60 years of age using VICON 512 Motion Analyzer. The results were as follows; 1) The mean Cadence of the above knee(A/K) patients and below knee(B/K) patients were $87.77{\pm}8.64$ steps/min, to $99.84{\pm}11.14$ steps/min.(p<0.05) 2) The mean Walking Speed of the above knee(A/K) patients and below knee(B/K) patients were $0.84{\pm}0.15$ m/s, to $0.96{\pm}0.25$ m/s.(p>0.05) 3) The mean Stride Length of the above knee(A/K) patients and below knee(B/K) patients were $1.14{\pm}0.14$ m, to $1.14{\pm}0.22$m.(p>0.05) 4) The mean maximal angles of joint on the hip flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $34.75{\pm}10.18_{\circ}$, to $32.32{\pm}6.34_{\circ}$ .(p>0.05) 5) The mean maximal angles of joint on the knee flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $66.97{\pm}15.08_{\circ}$, to $52.65{\pm}9.21_{\circ}$ .(p<0.05) 6) The mean maximal angles of joint on the ankle dorsiflexion motion for different above knee(A/K) patients and below knee(B/K) patients were $14.41{\pm}4.82_{\circ}$, to $10.04{\pm}3.49_{\circ}$ .(p>0.05) 7) The mean maximal angles of joint on the ankle plantarflexion motion for different above knee(A/K) patients and below knee(B/K) patients were $5.77{\pm}3.17_{\circ}$, to $2.75{\pm}4.49_{\circ}$ .(p>0.05)

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.363-370
• /
• 2015

Objective : The purpose of this study was to give the basic data for the cutting movement with the various angels on the poly urethane. Method : Ten healthy men voluntarily participated in this study. A three-dimensional motion analysis system (VICON) and force plates were used to analyze the movements of the joints for the lower extremities. For the statistical analysis the IBM SPSS 21.0 was used to perform repeated measured ANOVA and post-hoc comparison result was used to perform the Scheffe and the level of significance was set up at ${\alpha}=.05$. Results : There were significant differences for the time required for the increasing angles of the cutting movement(p<.05). In addition, there were significant differences for the maximum dorsiflexion, plantarflexion of ankle joint, maximum flexion of knee joint and hip joint with the increasing the angles of cutting movement(p<.05). Also, there were significant differences for the maximum adduction and abduction angle of the hip joint with the increasing of the angles of cutting movement. There was signigicant difference for the resultant utilized coefficient of friction(RuCOF) for the increasing angles of cutting movement(p<.05). Conclusion : There was a pattern to increase the coefficient friction with the angle of cutting direction. Also, it would be possible to use the poly urethane for the outdoor floor with the results of this study.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.335-345
• /
• 2013

The purpose of this study was to investigate the effects of foot type and ankle joint fatigue levels on the trajectories of center of pressure and center of mass during a single-leg stance. The study subjects included 24 healthy women (normal foot group, n=10; pronated foot group, n=14). Ankle joint muscle fatigue was induced by using an isokinetic dynamometer, where the fatigue levels were measured on plantar flexion and dorsiflexion at angular velocities of $30^{\circ}/s$ at 50% and 30% of the peak torque of ankle plantar flexion. Following assessments in the anteroposterior direction according to the level of fatigue, the pronated foot group showed decreased single-leg stance ability at 50% and 30% of the fatigue level. Moreover, the normal foot group showed better single-leg stance ability than the pronated foot group at 30% of the fatigue level. Following assessments in the mediolateral direction, we noted that the single-leg stance ability did not differ significantly according to the levels of fatigue or foot type. In conclusion, ankle plantar flexion at 50% and 30% of the peak torque reduced the ability of the pronated foot group to achieve a single leg stance in the anteroposterior direction. Moreover, the normal foot group showed better single-leg stance ability than the pronated foot group.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.8 no.1
• /
• pp.7-13
• /
• 2010

Purpose : This study was performed as follows in order to investigate the effect of presynaptic inhibition mechanism using the transcutaneous electrical stimulation (TES) for global synkinesis (GS) on the post-stroke hemiplegic patients. Methods : The subjects consist of 38 post stroke hemiplegic patients; experiments were performed on thirty patients excluding eight. The experiment was performed on sham group, sensory level stimulation group, and motor level stimulation group for 20 minutes a day 5 times a week for 6 weeks total. We compared the differences in GS levels and walking ability. The measurements were carried out pre, immediated, post 10th, and 20th, for a total of four measurements. Results : The GS level using sEMG found significant differences between groups at the post 10th and post 20th in dorsiflexion, and post 20th in plantarflexion (p<0.05, p<0.01). The motor level group indicated more significant differences when the number of electrical stimulations increased. TUG and 10 m walking test indicated a significant difference at immediated, post 10th, and post 20th. The motor level group showed more significant decreasing tendency than the sensory level group. Conclusion: From these results, electrical stimulation using presynaptic inhibition mechanism of transcutaneous electrical stimulation (TES) had positive effects for walking ability on inhibition of muscle tone in lower extremity. The motor level stimulation group experienced a more significant effect than the sensory level stimulation group. Therefore, the transcutaneous electrical stimulation (TES) is considered to be effective on walking ability increasing through inhibition of muscle tone in lower extremity for rehabilitation of post stroke hemiplegic patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.203-209
• /
• 2009

The purpose of this study is to develop a minimally constraint joint angle measurement system for the feedback control of FES (functional electrical stimulation) locomotion. Feedback control is desirable for the efficient FES locomotion, however, the simple on-off control schemes are mainly used in clinic because the currently available angle measurement systems are heavily constraint or cosmetically poor. We designed a new angle measurement system consisting of a magnet and magnetic sensors located below and above the ankle joint, respectively, in the rear side of ipsilateral leg. Two magnetic sensors are arranged so that the sensing axes are perpendicular each other. Multiple positions of sensors attachment on the shank part of the ankle joint model and also human ankle joint were selected and the accuracy of the measured angle at each position was investigated. The reference ankle joint angle was measured by potentiometer and motion capture system. The ankle joint angle was determined from the fitting curve of the reference angle and magnetic flux density relationship. The errors of the measured angle were calculated at each sensor position for the ankle range of motion (ROM) $-20{\sim}15$ degrees (dorsiflexion as positive) which covers the ankle ROM of both stroke patients and normal subjects during locomotion. The error was the smallest with the sensor at the position 1 which was the nearest position to the ankle joint. In case of human experiment, the RMS (root mean square) errors were $0.51{\pm}1.78(0.31{\sim}0.64)$ degrees and the maximum errors were $1.19{\pm}0.46(0.68{\sim}1.58)$ degrees. The proposed system is less constraint and cosmetically better than the existing angle measurement system because the wires are not needed.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.6 no.2
• /
• pp.31-38
• /
• 2000

The influence of the genu varum and the genu valgum in two groups of twenty adult man with deformation on hip joint, knee joint, ankle joint is as follows. 1. Each and all, the statistics that measure tibiofemorial angle indicated the group of the genu varum 168 1.42 and the group of the genu valgum 193 2.21, that was more larger or smaller than normal angle 183 of tibiofemorial. The measure Q-Angle(patellofemorial) indicates the group of the genu varum 9 1.5, the genu valgum 19 2.3, that was larger or smaller than normal angle 13. 2. It showed that range of motion hip joint adduction in the group of the genu varum was more larger than normal range of motion hip joint abduction in the group of the genu valgum was more larger than normal range of motion, hip joint internal rotation in the group of the genu valgum was more larger than normal range of motion, hip joint external rotation in the group of the genu varum was more larger than normal range of motion. 3. range of motion knee joint flexion was simillar to two groups of the genu varum and the genu valgum. On tibial tortion of the leg, the group of the genu varum indicated medial tibial tortion, and the genu valgum indicated lateral tibial tortion. 4. Each groups of the genu varum and the genu valgum in plantarflexion and dorsiflexion of ankle joint. With peak angle, the group of the genu varum showed toe-in that was more smaller than normal angle, and the group of the genu valgum showed toe-out that was more larger than normal angle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.7-14
• /
• 2002

In this study, a stress analysis is made fur an ankle foot orthosis (AFO) in the view point of structural stability. The investigated AFO is a solid and standard type. To analyze the stress distribution on the neck of AFO, the maximum AFO angular translation data is obtained by gait analysis. The material test of polypropylene is made to obtain the mechanical properties of AFO. The maximum dorsiflexion appears at the midstance in the gait analysis. The experimental angular translation at the top of AFO is about 10.3$^{\circ}$ at mid stance. Three models of AFO with different width of neck are made and analyzed with ABAQUS 6.1. The stress levels and distributions of 3 different width(W$_1$, W$_2$=0.85W$_1$, W$_3$=0.60W$_1$) AFO are investigated. As a result, the standard type(W$_1$) appears to the maximum stresses at the medial edge of cutout area surrounding ankle joint. The maximum stresses of the narrower type(W$_2$) are occured on medial edge and center of ankle. The narrowest type(W$_3$) appears to the maximum stresses at center of ankle. The maximum stresses become smaller as ankle width of AFO is narrower.

• Journal of International Academy of Physical Therapy Research
• /
• v.5 no.2
• /
• pp.757-763
• /
• 2014

The purpose of this study is to observe the effect of elasticity of taping on ankle muscles'activity and endurance after plyometric training that easily causes ankle injury, and provide baseline data for physical therapy intervention methods. The study subjects are 24 male students in their 20s who attend N University in Choongnam. They were divided into three groups; 8 subjects in the elastic taping group, 8 in the non-elastic taping group, and 8 in the non-taping group(control group). They had plyometric training for 6 weeks. After the training, this study measured their maximum voluntary isometric contraction(MVIC) and muscle endurance of the muscles around ankle joint. The experiment result is as follows. After the training, all three groups showed improvement in muscle strength and endurance. The elastic taping group showed insignificant improvement in muscle strength but significant increase in muscle endurance in plantarflexion. In dorsiflexion, both muscle strength and endurance increased significantly. The non-elastic taping group showed insignificant improvement in muscle strength but significant increase in muscle endurance in plantarflexion. Taping during plyometric training had a little or insignificant effect on muscle endurance and strength compared to the non-taping group.

• Journal of International Academy of Physical Therapy Research
• /
• v.5 no.2
• /
• pp.738-742
• /
• 2014

This study was conducted to investigate the effect of FES and ankle mobilization on the ankle motion and the quality of gait of chronic hemiplegic patients with limited ankle joint motions. As research subjects, 24 chronic hemiplegic patients who could walk independently, regardless of assistive aids, were selected. Then, 8 subjects received mobilization randomly and 8 subjects received FES and 8 subjects received mobilization and FES, at the same time. The dorsiflexion PROM significantly increased in the group of mobilization therapy, mobilization and FES all together(p<.01). There were statistically significant differences among the three groups(p<.01). The 10m walking test significantly decreased in the group of mobilization therapy, mobilization and FES all together(p<.05). There were statistically significant differences among the three groups(p<.01). The gait velocity significantly increased in the group of mobilization therapy, FES therapy, mobilization and FES all together(p<.05). There were statistically significant differences among the three groups(p<.01). The stride length significantly increased in the group of mobilization therapy, mobilization and FES all together(p<.05). There were statistically significant differences among the three groups(p<.05). In conclusion, these findings demonstrate that rather than only using one treatment technique, applying mobilization and FES together brings a more satisfactory result to hemiplegic patients with limited ankle joint motions.

• Journal of Korean Foot and Ankle Society
• /
• v.1 no.2
• /
• pp.95-101
• /
• 1997

Hallux valgus has been characterized by a valgus deformity of the great toe at the metatarsophalangeal joint, along with medial deviation of the first metatarsal, and by three components. First, there is a valgus angle more than $20^{\circ}$ at the first, metatarsophalangeal joint. Second, there is a greater angle than $9^{\circ}$ between the first. and second metatarsals. Third, there is bursal hypertrophy at the medial eminence of the first metatarsals head. The etiology is multifactorial and many procedures have been reported in the treatment of hallux valgus. Most of the procedures are directed towards pain relief, correction of deformity, and preservation of dorsiflexion in the first metatarsophalangeal joint. One such treatment is the Modified chevron osteotomy. It is technically simple, and provides greater stability than a standard osteotomy, and allows early ambulation after surgery. We a reviewed 19 cases with 13 patients of hallux valgus deformity. They were all treated with the Modified chevron osteotomy at the Department of Orthopedic Surgery, Choong ang Gil Hospital, between June 1988 and May 1994. The results of the study were as follows; 1. The mean age was 36 years. Three patients(5 case) were male and ten patients(14 cases) were female. 2. The mean value of the hallux valgus angle was $34.1^{\circ}$, and the first to second intermetatarsal angle was $12.1^{\circ}$, preoperatively. These angles were corrected to $15.8^{\circ}$ and $8.5^{\circ}$, respectively. 3. The metatarsalgia subsided in 17 cases (89.5%). avascular necrosis, non union, and dorsal angulation complicatious were nonexistant. Early bone healing occurred in all cases. 4. The Modified chevron osteotomy is technically simple. It provides excellent pain relief, early ambulation, increased mechanical stability, and many avoids many complications such as AVN, non-union, and dorsal angulation.