자동차 로워암과 같이 다양한 형상설계변수를 갖는 부품모듈의 최근 설계경향은 설계자가 관심을 갖는 설계영역을 선형 및 2 차 다항식으로 근사화시키는 반응표면모델로 탐색하고, 다음 단계로서 최적설계를 수행하는 것이다. 본 연구에서는 로워암의 설계변수 변화에 따른 작용응력과 중량의 비선형적 변화뿐만 아니라 이의 예측에 적합한 신경망모델로 직교성과 균형성을 모두 만족시키는 다수준 전산실험계획법으로 설계영역을 탐색하였다. 구축된 신경망모델에 형상 설계변수의 공차도 같이 고려할 수 있는 식스시그마 제약조건을 적용하여 로워암의 공차 최적설계를 수행하고, 최적해의 공차 강건성을 확보하였다.
플라즈마 디스플레이 패널(PDP)은 공정 절차가 간단하고 가격 경쟁력이 매우 뛰어나 일찌감치 대형 평판 디스플레이 시장을 주도해 왔으며 빠른 응답 속도를 기반으로 한 생생한 화질의 구현으로 3D TV 시장에서도 꾸준한 사랑을 받고 있다. 향후 더 큰 화면을 요구하는 PID(Public Information Display) 시장에서도 PDP 는 두각을 나타낼 수 있을 것으로 보인다. 하지만 PDP 는 여전히 LCD, OLED 등의 디스플레이에 비해 발광 효율이 낮고 소비 전력이 높다는 단점을 가지고 있다. 또한 미국 환경청(EPA)과 에너지부(DOE)가 공동으로 마련한 전자 제품의 효율 등급제인 에너지 스타(Energy Star) 제도가 끊임없이 개편되면서 소비 전력에 대한 규제가 점차 강화되고 있기 때문에 발광 효율 및 소비 전력 특성의 개선은 현재 PDP 업계가 해결해야 할 가장 중요한 과제라고 할 수 있다. 발광 효율의 개선과 관련하여 최근에는 PDP의 보호막으로 널리 쓰이고 있는 MgO 보다 2차 전자 방출 계수가 높아 PDP의 구동 전압을 낮추는 동시에 휘도와 발광 효율 특성을 개선시킬 수 있는 신 보호막에 대한 연구가 활발히 이루어지고 있다. MgO를 대체 가능한 신 보호막으로 언급되는 물질은 SrO 혹은 CaO 등이 대표적이다. 하지만 이러한 물질들은 공기 및 수분에 대한 용해도가 높기 때문에 증착된 막이 이후의 공정 과정(합착 및 가열 배기 등)에서 대기 중에 노출 될 경우 심하게 변질될 수 있다. 이러한 문제점을 해결하기 위해서 신 보호막 위에 기존의 MgO 보호막을 얇게 증착하여 공기로부터의 접촉을 차단하거나 펠렛을 제조하는 과정에서 MgO 에 신 보호막 물질을 소량만 첨가하는 등의 방법들이 제안되어 왔으며 그 결과 기존의 PDP 대비 구동 전압을 낮추고 발광 효율을 획기적으로 개선하는데 성공한 결과들이 지속적으로 보고되고 있다. 하지만 신 보호막이 공기 및 수분에 민감한 만큼, 고온의 공정으로 인해 PDP의 하판 유리로부터 상판에 증착된 박막으로 확산되는 불순물에 의해서도 오염되며 이 역시 신 보호막의 특성을 구현하는데 방해 요소로 작용한다. 본 연구에서는 PDP 하판의 불순물이 상판의 박막으로 확산되는 것을 방지하고자 하판 형광체 인쇄전 PECVD 증착법으로 확산 방지막을 1 가량 형성하였다. 이후 SIMS 분석을 통하여 하판 불순물의 확산이 효과적으로 차단됨을 확인하였고 신 보호막의 오염을 최소화하여 결과적으로 PDP의 구동 전압을 낮추고 효율을 획기적으로 개선하는데 기여할 수 있음을 확인하였다.
As the consumer market in the VR(virtual reality) and the head-up display industry grows, the demand for 5-axis machines and grooving machines using on a ultra-precision machining increasing. In this paper, ultra-precision diamond tools satisfying the cutting edge width of 500 nm were developed through the process research of a focused ion beam. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam. In order to reduce the influence of the Gaussian beam emitted from the focused ion beam, the lift-off process technology used in the semiconductor process was used. 2.9 ㎛ of Pt was coated on the surface of the diamond tool. The sub-micron tool with a cutting edge of 492.19 nm was manufactured through focused ion beam machining technology. Toshiba ULG-100C(H3) equipment was used to process fine-pattern using the manufactured ultra-precision diamond tool. The ultra-precision machining experiment was conducted according to the machining direction, and fine burrs were generated in the pattern in the forward direction. However, no burr occurred during reverse machining. The width of the processed pattern was 480 nm and the price of the pitch was confirmed to be 1 ㎛ As a result of machining.
최근 공동주택의 유지관리를 위한 인건비, 에너지비가 급속하게 증가하고 있다. 이에 따라 설계단계에서 이 비용을 절감할 수 있는 기법의 필요성이 제기되고 있다. 공동주택에 있어서는 대부분의 경우 세대당 동일한 내외벽, 창호 등이 반복적으로 사용되므로 단위평면의 LCC 최적화가 전체 건물의 LCC 최적화에 있어서 가장 중요하다. 이를 위하여 본 연구에서는 LCC 비용항목 중 공동주택의 물리적 시스템에 탄력성있게 변화하는 LCC 비용항목을 파악하였고, 초기건축비, 보수교체비, 에너지비를 종합적으로 최적화시킬 수 있도록 LCC 부위단가 개념을 도입하여 공동주택 적정치수 산정방법을 제시하였다. 여기에서 보수교체비산정은 보수교체비용 최소화에 의한 최적 보수교체주기법에 근거하였으며, 에너지 소비량 추정은 DOE-2에 의한 동적 에너지 부하량을 추정하여 LCC 부위단가 개념에 접목하였다. 보수교체비 최적화 기법과 동적에너지 분석에 의한 LCC 부위단가 개념은 기존의 개념과는 다른 독창적인 개념이다.
The building envelope is important specially for saving energy consumption of residential buildings. but Apartment houses in Korea commonly have inside insulation system which have constantly arisen thermal bridges, the risk of heat loss, as a necessity. This study aims to evaluate integrated insulation performance according to the different shapes of external walls, adjacent to windows. The thermal performance analysis was carried out by Equivalent U-value and using the three-dimensional heat transfer computer simulation (TRISCO-RADCON), under nine different cases of comparing among three each of different bases(current standard model, 30percent energy saving model and 60percent energy saving model). The heating and the cooling load were also compared between two cases (standard U-value and Equivalent U-value) of three each of different bases, using the Building energy simulation which is based on DOE-2.1 analysis. As results, it turns out that if the Equivalent U-value is considered on the envelope analysis, the heat flow loss will be increasing more than the standard U-value, and if heat insulation property of the residential building reinforced rather than current, the rate of influences on the thermal bridges would be extremely expanded. In addition, it is shown that annual heating loads of the apartment house with applied Equivalent U-value substantially increased by more than 15 percent compared to those with the existing U-value, but annual cooling loads were negligibly affected.
워터프런트의 온화한 기후특성과 함께 자연이나 개방성 그리고 그러한 것들을 포함하는 축제성이 시민 생활환경의 질 향상이라는 요구에 대응하기에 적합한 공간이라는 특징 때문에 부산에서는 해안지역 워터프런트의 개발이 수익의 극대화를 위해 초고층 건축물 위주로 개발이 진행되고 있다. 그러나 이러한 초고층 위주의 개발은 토지피복의 변화와 더불어 풍속을 약화시키기 때문에 개발에 의해 기후특성이 변화될 가능성이 크다고 할 수 있다. 본 연구에서는 초고층 개발에 따른 워터프런트의 기후변화를 파악하기 위해 최근 초고층 건축물 위주의 개발이 집중되고 있는 부산의 해운대 지역을 대상으로 개발 전후의 기후특성을 비교 검토하여 개발 이후 해운대의 겨울에 따뜻하고 여름에 시원한 해안지역 기후특성이 변화하여 여름의 기온상승이 현저하며 열대야일수가 증가하였음을 밝혔다.
본 연구에서는 GC/FID를 이용한 SPME법을 적용하여 액상에서 대표적 디젤첨가제인 EGBE, DGBE, DBM, TGME의 미량 분석 가능성을 조사하였다. 또한, 요인배치설계법을 적용하여 EGBE, DGBE, DBM, TGME 미량분석의 최적조건을 도출하였다. 실험은 통계분석결과 뿐만 아니라 요인 수의 최적화에 따른 중심합성설계에 의한 완전요인 설계법을 사용하였으며, 반응표면분석은 추출 효율이 주 영향인염 농도, 흡착 온도, 흡착 시간과 sonication 시간에 따른 2차 다항식에 의해 설명될 수 있음을 보여주었다. 본 연구에서의 결과는 요인배치설계법을 사용하여 액상 시료에서 EGBE, DGBE, DBM, TGME의 정량분석을 개선하는 새로운 자료분석법을 보여주었다.
마그네슘염과 알칼리를 출발물질로 하는 수산화마그네슘 제조에서 공정 변수가 생성되는 입자의 크기, 형상 및 응집도에 미치는 영향에 대해 완전 요인배치(full factorial) 실험계획법(Design of experiment)으로 연구하였다. 수열합성에서는 알칼리/$MgCl_2$ 몰 비가 낮을수록, $MgCl_2$ 농도와 수열처리 온도가 높을수록 평균입경은 커지고 1차 입자 크기와 2차 입자 크기가 유사하지만, 침전법으로 제조한 수산화마그네슘은 1차 입자의 응집현상으로 2차 입경은 커지며, 응집성은 알칼리원의 종류와 $MgCl_2$의 농도에 따라 달라졌다. 알칼리원의 종류에 따른 차이는 $NH_4OH$를 사용한 경우 NaOH를 사용한 것보다 입자의 크기가 커지고 분산성이 우수하였다. 크기 및 표면 상태가 다른 샘플을 선정하여 LDPE와 EVA 혼합수지에 혼합하여 난연 특성을 비교하였을 때, 50, 55% 함량에서는 일반적으로 2차 입경 크기가 감소함에 따라 LOI값은 상승하지만, UL-94에서는 1차 입자가 작은 경우에 더 우수한 등급을 받는 경우가 있었다. 60%의 높은 함량에서 입자의 제조경로와 무관하게 UL-94는 V0 등급이지만, 미립이더라도 응집성있는 경우 한계산소지수가 상대적으로 낮다는 것을 알 수 있었다.
Ha, Tae-Min;Son, Seung-Nam;Lee, Jun-Yong;Hong, Sang-Jeen
한국진공학회:학술대회논문집
/
한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
/
pp.434-435
/
2012
Plasma enhanced chemical vapor deposition (PECVD) silicon dioxide thin films have many applications in semiconductor manufacturing such as inter-level dielectric and gate dielectric metal oxide semiconductor field effect transistors (MOSFETs). Fundamental chemical reaction for the formation of SiO2 includes SiH4 and O2, but mixture of SiH4 and N2O is preferable because of lower hydrogen concentration in the deposited film [1]. It is also known that binding energy of N-N is higher than that of N-O, so the particle generation by molecular reaction can be reduced by reducing reactive nitrogen during the deposition process. However, nitrous oxide (N2O) gives rise to nitric oxide (NO) on reaction with oxygen atoms, which in turn reacts with ozone. NO became a greenhouse gas which is naturally occurred regulating of stratospheric ozone. In fact, it takes global warming effect about 300 times higher than carbon dioxide (CO2). Industries regard that N2O is inevitable for their device fabrication; however, it is worthwhile to develop a marginable nitrous oxide free process for university lab classes considering educational and environmental purpose. In this paper, we developed environmental friendly and material cost efficient SiO2 deposition process by substituting N2O with O2 targeting university hands-on laboratory course. Experiment was performed by two level statistical design of experiment (DOE) with three process parameters including RF power, susceptor temperature, and oxygen gas flow. Responses of interests to optimize the process were deposition rate, film uniformity, surface roughness, and electrical dielectric property. We observed some power like particle formation on wafer in some experiment, and we postulate that the thermal and electrical energy to dissociate gas molecule was relatively lower than other runs. However, we were able to find a marginable process region with less than 3% uniformity requirement in our process optimization goal. Surface roughness measured by atomic force microscopy (AFM) presented some evidence of the agglomeration of silane related particles, and the result was still satisfactory for the purpose of this research. This newly developed SiO2 deposition process is currently under verification with repeated experimental run on 4 inches wafer, and it will be adopted to Semiconductor Material and Process course offered in the Department of Electronic Engineering at Myongji University from spring semester in 2012.
기후변화에 관한 정부 간 패널기구(IPCC)는 온실가스 배출통계 작성과 관련한 국제적 기준을 정한 보고서에 따라 온실가스 배출통계의 정밀도 및 난이도를 고려하여 Tier 1/2/3의 세 가지의 방법론을 제시하였다. 국내의 경우 기존의 인벤토리 구축은 우리나라 전체 에너지소비량을 교통수단별 배출계수를 적용하여 산출하는 Top-down 방식으로 이루어 졌었고, 배출계수는 승용차의 계속적인 증가와 도로 구간 변화가 반영되지 못한 국내 교통상황에서 진행되었다. 온실가스 배출량 산정에 있어 $CO_2$의 배출량은 연료에 따른 탄소 함량으로 산정 하는 것이 보다 정확한 배출량 산정을 할 수 있다고 IPCC에서 제시함에 따라 정확한 배출량 산정을 위해 수송용 연료에 대하여 국가 고유 탄소 함량을 월별 또는 계절별 분석을 통하여, 국가 온실가스 통계의 정확도 제고와 최신 배출통계를 통해 앞선 기후변화 대응 대책 수립을 가능하게 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.