• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.248-255
• /
• 2013

The objective of this study is to optimize the Metal Injection Molding(MIM) process with design of experiments(DOE) and numerical analysis. To derive the optimal process condition, experiment or numerical analysis was performed under various process conditions. To analyze the interaction among influential factors contributing to the temperature at flow front and response surface in MIM, both central point and axial point were added to the full factorial design with 2 levels and 5 factors and then their impacts on response variable in 43 experimental conditions were analyzed and the significance was evaluated. As a result, sprue, runner, and gate were completely filled in about 0.247 seconds after injection, the front part of the green body was filled in about 0.3344 seconds, the green body except gate, etc changed to almost solid state in about 3.29 seconds, the Packinging pressure was completed in about 6.29 seconds, and the green body inside and outside and sprue, etc became solid in 13.2 seconds. The impact of individual or reciprocal action of factors on the temperature at flow front was analyzed through regular probability, test statistics, main effect, and interaction effect. As a result, of a total of 31 combinations of factors, 9 unit factors and reciprocal actions were significant, and the screening was also possible. A proper regression equation was drawn with regression analysis and response surface design on the response variable of temperature at flow front, and the applicability could be verified.

• 한국수소및신에너지학회논문집
• /
• 제29권3호
• /
• pp.251-259
• /
• 2018

Metal hydride based hydrogen storage under moderate temperature and pressure gives the safety advantage over the gas and liquid storage methods. Still solid-state hydrogen storage including metal hydride is below the DOE target level for automotive applications, but it can be adapted to stationary or miliary application reasonably. In order to develop a modular solid state hydrogen storage system that can be applied to a distributed power supply system composed of renewable energy - water electrolysis - fuel cell, the heat transfer and hydrogen storage characteristics of the metal hydride necessary for the module system design were investigated using AB5 type metal hydride, LCN2 ($La_{0.9}Ce_{0.1}Ni_5$). The planetary high energy mill (PHEM) treatment of LCN2 confirmed the initial hydrogen storage activation and hydrogen storage capacity through surface modification of LCN2 material. Expanded natural graphite (ENG) addition to LCN2, and compression molding at 500 atm improved the thermal conductivity of the solid hydrogen storage material.

• 대한환경공학회지
• /
• 제39권2호
• /
• pp.66-73
• /
• 2017

본 연구에서는 제올라이트 X를 이용한 Cs 이온 흡착시 흡착시간 및 초기농도, 온도 및 pH 변화와 같은 영향인자를 평가하였다. 이 결과로부터 Cs 이온의 흡착속도, 등온흡착량 및 열역학적 특성을 해석하였다. 제올라이트 X에 의한 Cs 이온의 흡착은 pH 5~10에서 효과적이었으며, 평형흡착시간은 약 60분이었다. 흡착속도와 등온흡착량은 유사 2차 속도 모델식과 Langmuir 식에 잘 적용되었다. Langmuir 식으로 구한 Cs 이온의 최대 흡착량은 293~333 K에서 각각 303.03~333.33 mg/g이었다. 제올라이트 X에 의한 Cs 이온의 흡착은 흡열반응이고 자발적인 반응이었다. 실험값을 다중회귀분석으로 최적화하여 2차 다항식을 얻었다. 이 최적화된 식으로부터 구한 종속변수의 값과 실험에서 구한 값은 잘 일치하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.51-57
• /
• 2019

구리 표면을 대기 중의 산화로부터 보호하기 위해서 아르곤(Ar)과 질소($N_2$) 가스를 이용하는 two-step플라즈마 공정으로 산화 방지층인 구리 질화물 패시베이션 형성을 연구하였다. Ar 플라즈마는 구리 표면에 존재하는 이물질을 제거하는 동시에 표면을 활성화시켜 다음 단계에서 진행되는 $N_2$ 플라즈마 공정 시 질소 원자와 구리의 반응을 촉진시키는 역할을 수행한다. 본 연구에서는 two-step 플라즈마 공정 중 Ar 플라즈마 공정 조건이 구리 질화물 패시베이션 형성에 미치는 영향을 실험계획법의 완전요인설계를 통하여 분석하였다. XPS 분석에 의하면 Ar 플라즈마 공정 시 낮은 RF 파워와 압력을 사용할 경우 구리 산화물 피크(peak) 면적은 감소하고, 반대로 구리 질화물(Cu4N, Cu3N) 피크 면적은 증가하였다. Ar 플라즈마 공정 시 구리 질화물 형성의 주 효과는 RF 파워로 나타났으며 플라즈마 공정 변수간 교호작용은 거의 없었다.

• Architectural research
• /
• 제7권2호
• /
• pp.13-21
• /
• 2005

Throughout history, buildings have been interrelated with certain indigenous characteristics such as regional climate, culture and religions. In particular, the control of regional climate has been primarily a concern for compatibility with nature. In our modern age, technologies to control climate have been successfully developed in architecture but the consumption of large quantities of natural resources can also produce environmental problems. This study is based on the proposition that this negative trend can be minimized with architectural design that is motivated to coexist with a regional climate. This study develops these design strategies for tall office buildings by analyzing various combinations of building design configurations based on regional climates. The objective is to determine the optimum architecture of tall office buildings during the initial design process that will reduce energy consumption for regional climatic conditions. The eQUEST energy simulating program based on DOE-2.2 was used for this comparative analysis study of the energy use in tall office buildings based on architectural design variables and different regional climates. The results are statistically analyzed and presented in functional architectural design decision-making tables and charts. As a result of the comparison of architectural design consideration for tall office buildings in relation to regional climates, buildings physically need less energy consumption when the architecture is concerned with the regional climate and it produces a more reasonable design methodology. In reality, imbalanced planning which is architectural design's lack of regional characteristics requires additional natural resources to maintain desired comfortable indoor conditions. Therefore, the application of integrated architectural design with regional nature should be the first architectural design stage and this research produces the rational. This architectural design language approach must be a starting point to sustaining long-term planning.

• 한국측량학회지
• /
• 제29권2호
• /
• pp.113-121
• /
• 2011

본 연구에서는 기하학적 정보를 바탕으로 생성된 유사도 기반의 면 객체 자동매칭 방법을 제안하였다. 이를 위하여 서로 다른 공간자료에서 교차되는 후보 매칭 쌍을 추출하고, CRITIC방법을 이용하여 연동 기준별 가중치를 자동으로 생성하여 선형조합으로 추출된 후보매칭 쌍 간의 형상유사도를 측정하였다. 이때, 훈련자료에서 조정된 상자도표의 특이점 탐색을 적용하여 도출된 임계값 이상인 경우가 매칭 쌍으로 탐색된다. 제안된 방법을 이종의 공간자료(수지치도 2.0과 도로명주소 기본도)의 일부지역에 적용한 결과, 시각적으로 형상이 유사하고 교차되는 면적이 넓은 건물객체가 매칭 되었으며, 통계적으로 F-Measure가 0.932로 높게 나타났다.

• 동력기계공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2016

Non-esterified biodiesel fuel is cheaper than esterified that because of a simple manufacturing process that only consists of filtering. Applicability of this on diesel engine with electronic control system was accomplished, then optimization adopting a fractional factorial design and response surface methodology was carried out at 25% and 50% of engine load in this study. Pressure of common rail and injection timing mainly effected on responses as specific fuel oil consumption and nitrogen oxides regardless of engine load. Estimations were 310.3 g/kWh of specific fuel oil consumption and 237 ppm of nitrogen oxides at 25% load, and 233.2 g/kWh of specific fuel oil consumption and 730 ppm of nitrogen oxides at 50% load. Tests to verify these estimations were accomplished and as the results, specific fuel oil consumption was 300.4 g/kWh and NOx was 277 ppm at 25% load and 236.8 g/kWh and 573 ppm at 50% load.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.287-294
• /
• 2013

롤투롤 인쇄전자 시스템은 높은 생산성과 낮은 원가를 이점으로 인쇄전자 산업에서 가장 각광을 받고 있는 인쇄기술 중 하나이다. 이러한 롤투롤 인쇄전자 시스템에서 인쇄패턴의 특성은 인쇄물의 기능적 성질을 결정짓는 중요한 문제라 할 수 있다. 따라서 본 연구에서는 인쇄패턴의 특성을 결정짓는 주요 인자들이 특별히 인쇄패턴의 두께와 표면 조도에 미치는 영향성에 대한 분석이 수행되었다. 실험계획법을 적용하여 인쇄패턴의 두께와 표면조도에 대한 각 인자의 주효과 및 교호작용 효과를 정량적으로 제시하였고, 분산분석을 통해 유의한 인자를 찾아내었다. 또한 이에 따르는 통계적 모델이 주요 인자의 함수로서 개발되었다. 이러한 결과는 롤투롤 전자인쇄 시스템의 특징에 따라 요구되는 인쇄패턴의 특성을 얻는데 활용될 수 있을 것이다.

• 대한치과교정학회지
• /
• 제34권2호
• /
• pp.153-163
• /
• 2004

II급 부정교합 치료 후 일어나는 재발에 영향을 미치는 요소를 알아보기 위하여 치료 후 결과가 안정하게 유지된 군과 재발이 일어난 군으로 구분하여 골격 및 치성요소를 비교하였다. 치료 전과 치료 후 측모 두부방사선사진을 이용하여 t-test와 상관분석을 시행한 결과 다음과 같은 결론을 얻었다. 1. 안정군과 재발군 간에 치료 전 골격 및 치성 관계는 대체로 차이가 없었다. 2. 안정군에서 하악골의 전방성장이 더 많이 일어났다. 3. 안정군에서의 하악 전치는 더 직립되었으며 상악전치는 설측 경사가 적은 경향을 보였다. 4. 재발군에서 교합평면이 전하방으로 경사되는 경향을 보였다.