• 센서학회지
• /
• 제27권6호
• /
• pp.407-413
• /
• 2018

Most sleep apnea patients exhibit severe snoring, and long-lasting sleep apnea may cause insomnia, hypertension, cardiovascular diseases, stroke, and other diseases. Although polysomnography is the typical sleep diagnostic method to accurately diagnose sleep apnea by measuring a variety of bio-signals that occur during sleep, it is inconvenient as the patient has to sleep with attached electrodes at the hospital for the diagnosis. In this study, a diagnostic pillow is designed to measure respiration, heart rate, and snoring during sleep, using only one polyvinylidene fluoride (PVDF) sensor. A PVDF sensor with piezoelectric properties was inserted into a specially made instrument to extract accurate signals regardless of the posture during sleep. Wavelet analysis was used to identify the extractability and frequency domain signals of respiration, heart rate, and snoring from the signals generated by the PVDF sensor. In particular, to separate the respiratory signal in the 0.2~0.5 Hz frequency region, wavelet analysis was performed after removing 1~2 Hz frequency components. In addition, signals for respiration, heart rate, and snoring were separated from the PVDF sensor signal through a Butterworth filter and median filter based on the information obtained from the wavelet analysis. Moreover, the possibility of measuring sleep apnea from these separated signals was confirmed. To verify the usefulness of this study, data obtained during sleeping was used.

• 센서학회지
• /
• 제30권6호
• /
• pp.456-460
• /
• 2021

In this study, a Non-Dispersive Infrared (NDIR) Carbon Dioxide (CO₂) sensor with an externally exposed optical cavity is proposed for improving sensitivity. NDIR CO₂ sensors with high performance must use a lamp-type infrared (IR) source with a strong IR intensity. However, a lamp-type IR source generates high thermal energy that induces thermal noise, interfering with the accuracy of the CO₂ concentration measure. To solve this problem, the optical cavity of the NDIR CO₂ sensor is exposed to quickly dissipate heat. As a result, the proposed NDIR CO₂ sensor has a shorter warm-up time and a higher sensitivity compared to the conventional NDIR CO₂ sensor.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.139-144
• /
• 2017

최근 GeoSensor 활용이 증가함에 따라 공간 센서 데이터와 같은 2차원 데이타를 효율적으로 처리하기 위한 질의 처리 시스템이 활발히 연구되고 있다. 하지만 기존 질의 처리 시스템들은 시공간 센서 데이터와 같은 다차원 데이타를 처리하기 위한 데이타 타입과 연산자를 지원하지 않기 때문에 이와 같은 다차원 데이터를 처리하기에 미흡하다. 따라서, 본 논문은 이러한 센서 네트워크에서 다차원 데이타를 효율적으로 처리하기 위하여 질의 처리 시스템을 개발하였다. 마지막으로 본 논문은 시나리오를 통해 본 시스템의 효용성을 검증하고, 수행시간 및 메모리 사용량 등의 성능평가를 통해 기존 시스템들보다 성능이 우수함을 입증하였다.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.740-745
• /
• 2008

This paper presents a new non-contact 3D robotic inspection system to measure the precise positions of screw and punch holes on a car body frame. The newly developed sensor consists of a CCD camera, two laser line generators and LED light. This lightweight sensor can be mounted on an industrial robot hand. An inspection algorithm and system that work with this sensor is presented. In performance evaluation tests, the measurement accuracy of this inspection system was about 200 ${\mu}m$, which is a sufficient accuracy in the automotive industry.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.57-62
• /
• 2015

Non-destructive techniques are used widely in the metal industry in order to control the quality of materials. Eddy current testing(ECT) is one of the most extensively used non-destructive techniques for inspecting electrically conductive materials at very high speeds that does not require any contact between the test piece and the sensor. The New ECT sensor which can detect inner defects was developed regardless the condition of surface. This sensor is verified to do experiment which measure the loss of induced electromotive force. The loss of induced electromotive force was measured in 5.4% and this low frequency ECT device can detect internal defects at depth 20 mm.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.63-67
• /
• 2015

Non-destructive techniques are used widely in the metal industry in order to control the quality of materials. Eddy current testing(ECT) is one of the most extensively used non-destructive techniques for inspecting electrically conductive materials at very high speeds that does not require any contact between the test piece and the sensor. The New ECT sensor which can detect inner defects was developed regardless the condition of surface. This sensor is verified to do experiment which measure the loss of induced electromotive force. The loss of induced electromotive force was measured in 5.4% and this low frequency ECT device can detect internal defects at depth 20 mm.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.315-318
• /
• 2005

Lots of researches have been focusing on ubiquitous computing which means wherever, whenever, whatever the required information must be accessible. In ubiquitous computing environment, ubiquitous sensor network (USN) is the basis technology for gathering and transferring the required information. However sensor network characteristically has more severe vulnerability than the existing networks do. The paper presents operation of secure protocols for delivering information in secure in ubiquitous computing environment and show improvement of the secure transferring protocol.

• 센서학회지
• /
• 제17권2호
• /
• pp.106-113
• /
• 2008

Perceiving a 3D moving target is important for automated machines including robots in a factory. Although stereovision or ultrasonic ranging is often employed for the purpose, the former requires high-cost systems, and the latter suffers from low-resolution. In this paper, we propose a PSD sensor array to acquire the 3D profile of an object conveyed by a belt. Rectangular parallelepiped target objects at random positions and orientations are assumed. Nine PSD sensors are configured in a $3{\times}3$ array above the belt, and fired in a sequence so that cross-talk can be avoided. Time gaps among sensor readings are compensated to get a result that is obtainable when sensors' measurements are made simultaneously along a sensing line. The system designed is tested with various objects in experiments.