• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.91-98
• /
• 2020

In order to prevent a collision accident during sudden braking, we have proposed an hazard lamps automatic operation system that can be easily installed in existing vehicles that do not have hazard lamps automatic operation. There are several ways to recognize sudden braking. Using GPS, the system does not work in a tunnel, and it is difficult to install the system additionally on an existing vehicle using a vehicle speed sensor. Therefore, the proposed system eliminates these problems by using the acceleration sensor and makes it possible to recognize even the sudden turning and bounce of the vehicle.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.292-293
• /
• 2022

본 논문에서는 무선센서네트워크 기반의 연안·해양 환경모니터링 시스템을 이용해 연안·해양지역의 대기환경 정보는 물론 수질 환경의 정보를 측정하여 모니터링하였다. 연안 및 해양 환경의 모니터링을 위해 고려된 해양 센서를 사용하여 무선 센서 네트워크를 이용하여 온도, 습도, 조도, 기압, 이슬점의 대기환경 정보와 용존산소량(DO), 수소이온지수(pH), 수온 등의 수질환경 정보를 측정한 후 측정된 환경 정보를 베이스스테이션으로 전송하고 모니터링 하도록 하였다. 환경 정보를 전송할 때 정확하고 신속한 전송을 위하여 데이터 전달 확률이 높은 여러 라우팅 프로토콜 전송방식을 이용하여 전달하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1155-1156
• /
• 2023

본 논문은 다수의 저정밀 GPS(Global Positioning System) 센서를 활용하여, 보다 정밀하고 정확한 GPS 좌표 보정 모델을 설계하고자 한다. 제안 모델에서는 다수의 저정밀 센서에서 GPS 좌표를 수합한 뒤, 최소자승법과 선형칼만필터로 값을 보정한다. 본 논문에서는 Horizontal Accuracy 가 2m 인 저정밀 GPS 센서를 활용하여 제안 모델을 설계하였으며, 저정밀 센서와 제안 모델 비교 실험에서 제안 모델의 46% 정밀도 향상을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.155-163
• /
• 2007

In this paper, Though sensors of Ubiquitous Middle-ware System based on RFID/USN can usually be reacted from six mouths to two years, they can be exhausted their power of storage battery only one day by communication rates and ranges. That is, the lifetime of sensor node is depended on how much spending power under wireless communication that can communicate its sensing data to its destination. Therefore, it is necessary that each sensor should be designed the Routing path to its destination, in order to remote collecting data. But, in order to improve lifetime of sensor node and modify inner setting, it is opposite to simple searching path method of sensor node by entering external commands. accordingly, 1:n sensor arrangement of n form command and data send-receive that is possible simulation do without interference other sensors and research to different sensor data analysis and conversion ways to convert Sensing data that accept from sensors to actuality information.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.185-199
• /
• 2006

In this paper, to detect lateral direction sound pressure fiber optic sensor using Fabry-Perot interferometeric sensor array was fabricated and experimented. This parallel sensor array composed of one light source and the light split into each sensor using directional coupler and to see the output signal the array system do not need any digital signal processor. As a lateral direction sound source arbitrary sound frequency of 100Hz, 200Hz, and 655Hz using by nondirectional speaker were applied to the array sensor which installed on $60cm{\times}60cm{\times}60cm$ latticed structure. The detected signals from the two sensors were analyzed in the time and frequency domains. It was confirmed that the suggested sensor array detected applied sound source well but there were a little amplitude differences in between the sensors. Because the sensor supported simply at both ends theoretical analysis was performed and its solution was suggested. To compare the theoretical and experimental results arbitrary sound frequency of 2kHz was applied to the sensor array. It shows that experimental results was good agreement with theoretical results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.9-16
• /
• 2008

For the efficient routing on a Sensor Network, one may consider a deployment problem to interconnect the sensor nodes optimally. There is an analogous theoretic problem: the Steiner Tree problem of finding the tree that interconnects given points on a plane optimally. One may use the approximation algorithm for the problem to find out the deployment that interconnects the sensor nodes almost optimally. However, the Steiner Tree problem is to interconnect mathematical set of points on a Euclidean plane, and so involves particular cases that do not occur on Sensor Networks. Thus the approach of using the algorithm does not make a proper way of analysis. Differently from the randomly given locations of mathematical points on a Euclidean plane, the locations of sensors on Sensor Networks are assumed to be physically dispersed over some moderate distance with each other. By designing an approximation algorithm for the Sensor Networks in terms of that physical property, one may produce the execution time and the approximation ratio to the optimality that are appropriate for the problem of interconnecting Sensor Networks.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.75-81
• /
• 2009

In this paper, USN of wireless communication with easy to install and effectiveness with variety information gathering has been proposed as a alternative of wired-based line for transmission of fire sensing data. But, The sensor node using USN should be considered for wireless transmission range and reliability of information. In this study, the zigbee protocol sensor node was implemented and then tested transmission range of sensor node as 10m interval using voltage information of DC 3V & 5V. Here, maximum transmission distance was confirmed 90m inside-outside. When used mesh routing relay node, distance was not limited. In USN network building, when fire sensing data transmitted, the sensing data same between direct sensing data from sensor and collecting data at USN. Therefore, was confirmed reliability for transmission range and information of proposed zigbee sensor node.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.48-62
• /
• 2006

In recent years, wireless sensor networks(WSNs) have emerged as a new fast-growing application domain for wireless distributed computing and embedded systems. Recent Progress in computer and communication technology has made it possible to organize wireless sensor networks composed tiny sensor nodes. Furthermore, ad-hoc network protocols do not consider the characteristics of wireless sensor nodes, making existing ad-hoc network protocols unsuitable for the wireless sensor networks. First, we propose power-aware routing protocols based on energy-centered routing metrics. Second, we describe power management techniques for wireless sensor nodes using the spatial locality of sensed data. Many nodes can go into a power-down mode without sacrificing the accuracy of sensed data. Finally, combining the proposed techniques, we describe an overall energy-efficient protocol for data collection. Experimental results show that the proposed routing protocol can extend the routing path lifetime more than twice. The average energy consumption per sensing period is reduced by up to 30%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1941-1946
• /
• 2009

Wireless sensor networks do the monitoring and collecting information in the environment instead of human. Sensor networks are consisted of small sensor nodes with very limited hardware resource and very low network bandwidth. The wireless communication environment causes lots of communication errors so that the sensor network requires error correction technique to increase the reliability of network. The performance of error correction technique could be increased by the researches about the error pattern of CRC. In the paper, we did the performance evaluation - transmission interval, distance between sensor nodes, racket size, and RF power - that affects to the success ratio of data transmission in the indoor environment. we propose the performance metrics of system configuration based on the analysis of performance evaluation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.137-142
• /
• 2017

Recently, along with the development of IoT technology, technologies for wirelessly sensing various data, such as sensor nodes, RFID, CCTV, smart phones, etc., have rapidly developed, and in the field of multiple applications, to utilize sensor network related technology Have been actively pursued in various fields. Therefore, as GeoSensor utilization increases, query processing systems for efficiently processing 2D data such as spatial sensor data are actively researched. However, existing spatial query processing systems do not support a spatial-temporal data type and a spatial-temporal operator for processing spatial-temporal sensor data. Therefore, they are inadequate for processing spatial-temporal sensor data like GeoSensor. Accordingly, this paper developed a spatial-temporal query processing system, for efficient spatial-temporal query processing of spatial-temporal sensor data in a sensor network.