• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3501-3518
• /
• 2020

The method of DNS data collection is one of the most important parts of DNS simulation. DNS data contains a lot of information. When it comes to analyzing the DNS security issues by simulation on the cyber range with customized features, we only need some of them, such as IP address, domain name information, etc. Therefore, the data we need are supposed to be light-weighted and easy to manipulate. Many researchers have designed different schemes to obtain their datasets, such as LDplayer and Thales system. However, existing solutions consume excessive computational resources, which are not necessary for DNS security simulation. In this paper, we propose a light-weighted active data collection method to prepare the datasets for DNS simulation on cyber range. We evaluate the performance of the method and prove that it can collect DNS data in a short time and store the collected data at a lower storage cost. In addition, we give two examples to illustrate how our method can be used in a variety of applications.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1318-1325
• /
• 2017

Direct Numerical Simulation (DNS) serves as an irreplaceable tool to probe the complexities of multiphase flow and identify turbulent mechanisms that elude conventional experimental measurement techniques. The insights unlocked via its careful analysis can be used to guide the formulation and development of turbulence models used in multiphase computational fluid dynamics simulations of nuclear reactor applications. Here, we perform statistical analyses of DNS bubbly flow data generated by Bolotnov ($Re_{\tau}=400$) and LueTryggvason ($Re_{\tau}=150$), examining single-point statistics of mean and turbulent liquid properties, turbulent kinetic energy budgets, and two-point correlations in space and time. Deformability of the bubble interface is shown to have a dramatic impact on the liquid turbulent stresses and energy budgets. A reduction in temporal and spatial correlations for the streamwise turbulent stress (uu) is also observed at wall-normal distances of $y^+=15$, $y/{\delta}=0.5$, and $y/{\delta}=1.0$. These observations motivate the need for adaptation of length and time scales for bubble-induced turbulence models and serve as guidelines for future analyses of DNS bubbly flow data.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.55-64
• /
• 2021

PURPOSE: The purpose of this study was to apply dynamic neuromuscular stabilization (DNS) to subjects with forward head posture (FHP) and to compare its effects on respiratory function as against the conventional neck stabilization exercise and neck stretching and extensor strengthening exercises. METHODS: The whole-body posture measurement system was used to measure the degree of FHP, and a spirometer and a respiratory gas analyzer were used to measure the respiratory function. After the intervention was completed, the changes over time were analyzed in the DNS group, the neck stabilization exercise group, and the neck stretching and extensor strengthening exercise group. The inter-group difference in the changes was also analyzed. A repeated ANOVA was performed to compare the respiratory function according to the period between the three groups, and the least significant difference (LSD) method was used for the post hoc test. RESULTS: After the 6-week exercise period, respiratory functions, such as forced vital capacity (FVC), forced expiratory volume for 1 second (FEV1), forced expiratory volume for 1 sec/forced vital capacity (FEV1/FVC), maximum oxygen intake (VO₂max), and the volume of expired gas (VE), significantly improved according to the period (p < .05), but no inter-group differences were found. CONCLUSION: DNS is an effective training method, and can be applied along with neck stabilization exercise and neck stretching and extensor strengthening exercises, which are widely used in clinical practice, to people with FHP who cannot directly perform neck exercises to improve their respiratory function.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.50-53
• /
• 2002

• 한국분무공학회지
• /
• 제8권4호
• /
• pp.9-16
• /
• 2003

The Purpose of this study is to investigate the relationships between the local heat release rate and CH concentration have been investigated by numerical simulations of methane-air premixed flames. And simultaneous CH and OH PLIF(Planar Laser Induced Fluorescence) measurement has been also conducted for lean premixed flame as well as for laminar flames. Numerical simulations are conducted for laminar premixed flames and turbulent ones by using PREMIX in CHEMKIN and two dimensional DNS code with GRI mechanism version 2.11, respectively. In the case of laminar premixed flame, the distance between the peak of heat release rate and that of CH concentration is under $91{\mu}m$ for all equivalence ratio calculated in present work. Even for the premixed flame in high intensity turbulence, the distribution of the heat release rate coincides with that of CH mole fraction. For CH PLIF measurements in the laminar premixed flame burner, CH fluorescence intensity as a function of equivalence ratio shows a similar trend with CH mole fraction computed by GRI mechanism. Simultaneous CH and OH PLIF measurement gave us useful information of instantaneous reaction zone. In addition, CH fluorescence can be measured even for lean conditions where CH mole fraction significantly decreases compared with that of stoichiometric condition. It was found that CH PLIF measurements can be applicable to the estimation of the spatial fluctuations of heat release rate in the engine combustion.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1305-1318
• /
• 2000

The local wall shear stress in transitional boundary layer was estimated from the near-wall mean velocity data using the principle of Computational Preston Tube Method(CPM). The previous DNS and experimental databases of transitional boundary layers were used to demonstrate the accuracy of the method and to provide the applicable range of wall unit y(sup)+. The skin friction coefficients predicted by the CPM agreed well with those from previous studies. To reexamine the applicability of CPM, near-wall hot-wire measurement were conducted in developing transitional boundary layers on a flat plate with different freestream turbulence intensities. The intermittency profiles across the transitional boundary layers were reasonably obtained from the conditional sampling technique. An empirical correlation between the representative intermittency near the wall and free parameter K$_1$of the extended wall function of CPM has been newly proposed using the present and other experimental data. The CPM has been verified as a useful tool to measure the wall shear stress in transitional boundary layer with reasonable accuracy.

• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.780-789
• /
• 2007

Lock-on phenomenon in the wake of a circular cylinder is investigated at the Reynolds number of 360 using direct numerical simulation (DNS). To induce lock-on, a streamwise velocity perturbation with a frequency of twice the natural shedding frequency is superimposed on the free stream velocity. The Reynolds stress distributions are investigated to analyze the streamwise force balance acting on the recirculation region and the results are compared with the previous experimental result. When the lock-on occurs, the pressure force on the recirculation region is shown to increase mainly due to the reversal of the Reynolds shear stress distribution, which is consistent with our previous results using PIV measurement. It is also shown that, with the lock-on, the strength of the primary vortices increases whereas that of the secondary vortices decreases significantly. Further, under the lock-on condition the wavelength of the secondary vortices increases by as much as 2.5 times.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.514-522
• /
• 2001

In order to investigate the relation between wall vorticity and streamwise velocity fluctuations in a turbulent boundary layer, a wall vorticity probe has been developed, which consists of two hot-wires on the wall aligned in V configuration. Although the measured intensity of spanwise wall vorticity fluctuations is somewhat lower than previous results, the intensity of streamwise wall vorticity fluctuations is in good agreement with them. It has been shown that the measured intensity of spanwise wall vorticity fluctuations is affected by transverse length of the wall vorticity probe. Instantaneous streamwise and spanwise wall vorticity fluctuations are compared with the results of DNS. Probability density function of spanwise wall vorticity fluctuations shows good agreement with previous results and is different from that of streamwise wall vorticity fluctuations. Energy spectrum of streamwisw wall vorticity fluctuations is lower than that of spanwise wall vorticity fluctuations in low frequency region.

• 디지털산업정보학회논문지
• /
• 제20권1호
• /
• pp.109-118
• /
• 2024

Recently, a social issue has arisen involving RDDoS attacks following the sending of threatening emails to security administrators of companies and institutions. According to a report published by the Korea Internet & Security Agency and the Ministry of Science and ICT, survey results indicate that DDoS attacks are increasing. However, the top response in the survey highlighted the difficulty in countering DDoS attacks due to issues related to security personnel and costs. In responding to DDoS attacks, administrators typically detect anomalies through traffic monitoring, utilizing security equipment and programs to identify and block attacks. They also respond by employing DDoS mitigation solutions offered by external security firms. However, a challenge arises from the initial failure in early response to DDoS attacks, leading to frequent use of detection and mitigation measures. This issue, compounded by increased costs, poses a problem in effectively countering DDoS attacks. In this paper, we propose a system that creates detection rules, periodically collects traffic using mail detection and IDS, notifies administrators when rules match, and Based on predefined threshold, we use IPS to block traffic or DDoS mitigation. In the absence of DDoS mitigation, the system sends urgent notifications to administrators and suggests that you apply for and use of a cyber shelter or DDoS mitigation. Based on this, the implementation showed that network traffic was reduced from 400 Mbps to 100 Mbps, enabling DDoS response. Additionally, due to the time and expense involved in modifying detection and blocking rules, it is anticipated that future research could address cost-saving through reduced usage of DDoS mitigation by utilizing artificial intelligence for rule creation and modification, or by generating rules in new ways.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.100-105
• /
• 2016

3D 프린터의 증가에 따라 대량 생산이 아닌 소량 제품의 빠른 개발 시간을 고려하여 3D 스캐너의 활용도 점차 증가하고 있다. 소량 생산 개발 트렌드뿐만 아니라 최근 자동차 및 전자부품의 제조업에 있어서도 정밀 부품의 개발 및 검사, 측정 등의 품질 문제가 중요한 이슈로 떠오르고 있다. 최근 3D 스캐너 장비 효율성 및 인식기술은 지속적으로 향상되었지만, 이에 반해, 이를 준비하는 스프레이 작업은 시간이 많이 걸리고 환경문제가 유발되기 때문에 제조업 제품 개발자들은 자동스프레이 도포 시스템 개발에 대해 지속적으로 요구해 왔다. 본 연구를 통해서 3D 스캔 준비 작업으로 필요한 스프레이 자동 도포 장비를 개발하였으며, 스프레이 도포 시 균일하게 미세 분말이 도포 될 수 있도록 파라미터 세팅에 대해 실험적으로 연구하였다. 결과적으로 빠르고 쉬운 자동 스프레이 도포 장비가 개발 되었고, 이를 활용해서 3D 측정을 위한 준비 시간이 기존 대비 1/10수준으로 단축되었다. 또한 다양한 조건에 대한 비교를 통해 최적의 도포 조건을 실험적으로 제시하였다.