• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.119-124
• /
• 2001

Dimethyl terephthalate (DMT). 1.4-butanediol (1.4-BD) and poly (tetramethylene ether) glycol (PTMG) in the molecular weight of 2000 (g/mol) were used to synthesize poly(ether-b-ester) thermoplastic elastomers (TPEEs). The final copolymers were annealed to improve thermal stability at elevated temperatures and mechanical properties. This study showed that as the proportion of soft segment increases melting temperature and degree of crystallinity of TPEEs decrease constantly. In case of mechanical properties like flexural strength and flexural elastic modulus. $35-PTMG^{2000}$ indicates the highest values due to more efficient physical interlock.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.4
• /
• pp.329-336
• /
• 2004

Objectives : Iron (Fe) is an essential element in biological processes; however excessive Fe is harmful to human health. Some air pollutants contain a high level of Fe, and the human lung could therefore be over-exposed to Fe through inhaled air pollutants. This study was performed to investigate the role of metal transporters (divalent metal transporter 1, DMT1, and metal transporter protein 1, MTP1) in the lung under the environments of Fe deficiency in the body and Fe over-exposure in the lung. Methods : Rats were fed Fe deficient (FeD, 2-6 mg Fe/kg) or Fe supplemented (FeS, 120 mg Fe/kg) diet for 4 weeks, followed by a single intratracheal instillation of ferrous sulfate at low (10 mg/kg) or high (20 mg/kg) dose. Fe concentration was analyzed in the serum, lung and liver, and histopathological findings were observed in the lung at 24 hours after Fe administration. The level of DMT1 and MTP1 expression in the lung was analyzed by RT-PCR. Also, the effect of Fe deficiency in the body was evaluated on the level of Fe concentration and metal transporters compared to FeS-diet fed rats at the end of 4-week FeD or FeS diet. Results : The 4-week FeD diet in rats induced an Fe deficiency anemia with decreased serum total Fe, increased unsaturated Fe binding capacity and hypochromic microcytic red blood cells. The concentration of Fe in the lung and liver was lower in the FeD-diet fed rats than in the FeS-diet fed rats. The level of metal transporters mRNA expression was higher in the FeD-diet fed rats than in the FeS-diet. The concentration of Fe in the lung was increased in a dose-dependent pattern after intratracheal instillation of Fe into the rats, while the level of Fe in the serum and liver was not increased in the low-dose Fe administered rats. Therefore, DMT1 and MTP1 mRNA was highly expressed in both FeD-diet and FeS-diet fed rats, after intratracheal instillation of Fe. Conclusions : DMT1 and MTP1 mRNA were more highly expressed in FeD-diet fed rats than in FeS-diet fed rats. The over-exposure of Fe intratracheally induced high expression of metal transporters and increased Fe deposition in the lung in both FeD-diet and FeS-diet fed rats, but did not increase the Fe level of the serum and liver in low-dose Fe administered rats. These results suggest that the role of metal transporters in the lung might be different in a part from the duodenum under the environment of over-exposure to Fe.

• Journal of Nutrition and Health
• /
• v.42 no.5
• /
• pp.434-441
• /
• 2009

Ferroportin-1 (FPN) is a transporter protein that is known to mediate iron export from macrophages. The purpose of this study was to investigate the effect of copper on the regulation of FPN gene expression in J774 mouse macrophage cells. J774 cells were treated with various concentrations of $CuSO_4$ and RT-PCR analyses were performed to measure the steady-state levels of mRNAs for FPN and divalent metal transporter 1 (DMT1, an iron importer). Copper treatment significantly increased FPN mRNAs in a dose-dependent manner, but didn't change the levels of DMT1 mRNA. Experiments with transcriptional inhibitor actinomycin D (0.5 ${\mu}g$/mL) revealed that copper treatment did not affect the half-life of FPN mRNAs in J774 cells. On the other hand, results from luciferase reporter assays showed that copper directly stimulated the promoter activity of FPN. In summary, our data showed copper induced FPN mRNA of macrophages via a transcriptional rather than post-transcriptional mechanisms.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2004.05a
• /
• pp.101-101
• /
• 2004

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.249-256
• /
• 2001

Optical Color Corescanner firstly developed by DMT-GeoTec, Germany and further upgraded through the Korea-Germany joint project is capable of duplicating the core surfaces. The tool uses a digital CCD line camera. As the core is rotated by an electric motor, the camera scans the uppermost line, everytime with a circumferential increment of up to 0.05mm(20pixels/mm) and hence a complete 360$^{\circ}$ unwrapped image(core image) is produced. This paper illustrated diverse research benefits of such core images from several test sites in our country. All scanned images could be stored as a data-base one and easily used with software facilities \circled1 to evaluate a percental distribution of mineral components or grain size etc. not only for the rock classification but also for e.g. the assessment of building stones, \circled2 to study potential reservoirs as a hydrocarbon indicator using ultraviolet fluorescence reflection from cores, \circled3 to facilitate the qualitative and quantitative analysis of fractures, \circled4 to evaluate the fractures and thin bedded reservoirs using spectral color responses. Based on abundant scanning experiments, it would seem that this imaging work should lead to reflecting the future trend in underground survey toward a more comprehensive understanding of the properties and behaviors of in situ rocks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.231-238
• /
• 2001

To investigate the underground structure of shallow water, Han-river near Yangsou-Ri, high resolution hydroacoustic measurements were carried out for the engineering design of railroad bridge. The acoustic source was a Boomer with an energy of 90 to 280J and in a frequency range up to about 16KHz. The reflected signals were received by using both traditional hydrophones(passive element) and a specially devised receiver unit(active element) mainly composed of piezofilms and preamplifier. They are connected to the "SUMMIT" data acquisition system(DMT-GeoTec company), where the sampling interval was set to 1/32㎳. The source position was continuously monitored by a precision DGPS system whose positioning accuracy was on the order of loom. For the quality control purposes, two different source-receiver geometries were taken. That is to say, the measurements were repeated along the profile everytime depending on the different source energy(175J, 280J), the receiving elements(passive, active) and two different source-receiver geometries. It was shown that the data resolution derived from a proper arrangement with the active hydrophone could be greatly enhanced and hence the corresponding profile section caused by the regular data processing system "FOCUS" accounted excellently for the underground formation below the shallow water.w the shallow water.

• IMMUNE NETWORK
• /
• v.23 no.2
• /
• pp.16.1-16.19
• /
• 2023

Bacillus Calmette-Guerin (BCG) vaccine is the only licensed vaccine for tuberculosis (TB) prevention. Previously, our group demonstrated the vaccine potential of Rv0351 and Rv3628 against Mycobacterium tuberculosis (Mtb) infection by directing Th1-biased CD4⁺ T cells co-expressing IFN-γ, TNF-α, and IL-2 in the lungs. Here, we assessed immunogenicity and vaccine potential of the combined Ags (Rv0351/Rv3628) formulated in different adjuvants as subunit booster in BCG-primed mice against hypervirulent clinical Mtb strain K (Mtb K). Compared to BCG-only or subunit-only vaccine, BCG prime and subunit boost regimen exhibited significantly enhanced Th1 response. Next, we evaluated the immunogenicity to the combined Ags when formulated with four different types of monophosphoryl lipid A (MPL)-based adjuvants: 1) dimethyldioctadecylammonium bromide (DDA), MPL, and trehalose dicorynomycolate (TDM) in liposome form (DMT), 2) MPL and Poly I:C in liposome form (MP), 3) MPL, Poly I:C, and QS21 in liposome form (MPQ), and 4) MPL and Poly I:C in squalene emulsion form (MPS). MPQ and MPS displayed greater adjuvancity in Th1 induction than DMT or MP did. Especially, BCG prime and subunit-MPS boost regimen significantly reduced the bacterial loads and pulmonary inflammation against Mtb K infection when compared to BCG-only vaccine at a chronic stage of TB disease. Collectively, our findings highlighted the importance of adjuvant components and formulation to induce the enhanced protection with an optimal Th1 response.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2003.05a
• /
• pp.51-52
• /
• 2003

일반 지역주민들에 있어서 Cd에 폭로되는 주된 경로는 소화기계이나 아직까지 소화기계에서의 Cd 흡수기전은 잘 알려져 있지 않은 편이다. 이번 연구에서는 식이를 이용하여 실험동물의 체내 Fe 수준을 조절함에 따라 Fe 이동단백질로 알려진 DMT1의 발현과 Cd 흡수와의 관련성을 관찰함으로서 금속이온의 흡수기전에 대한 이해를 높이고자 하였다. (중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.07a
• /
• pp.1-34
• /
• 1999

본 원고는 말뚝기초의 설계에 사용되고 있는 현장 시험법의 특징과 연구결과를 요약정리 한 것이다. 현장토질시험법이 국내에서 본격적으로 사용되기 시작한 것은 1980년도 초반으로 추정하고 있다. 이후 많은 간척사업과 연약지반 개량을 실시하면서 여러 종류의 현장 시험법이 소개되었으며 이러한 기술 발전에 편승하여 말뚝기초 설계에도 현장토질시험법을 이용함으로서 신뢰성 있는 말뚝기초의 지지력산정을 산정코자 노력하고 있다. 본 원고에서는 지금까지 국내에서 주로 사용하고 있는 SPT, CPT, PMT 및 최근 사용실적이 높아지고 있는 DMT의 시험방법, 원리, 관련 토질정수, 말뚝기초 설계에 활용방법에 대하여 국내외 자료를 조사하여 정리하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.61-66
• /
• 2013

With the development of layered manufacturing, thermally conductive molds or molds embedding conformal cooling channels can be directly fabricated. Although P21 tool steel is widely used as a mold material because of its dimensional stability, it is not efficient for cooling molds owing to its low thermal conductivity. Hence, the use of functionally graded materials (FGMs) between P21 and Cu may circumvent a tradeoff between the strength and the heat transfer rate. As a preliminary study for the layered manufacturing of thermally conductive molds having FGM structures, one-dimensional P21-Cu FGMs were fabricated by using laser-aided direct metal tooling (DMT), and then, material properties such as the thermal conductivity and specific heat that are related to the heat transfer were measured and analyzed.