• Environmental Analysis Health and Toxicology
• /
• 제19권2호
• /
• pp.191-200
• /
• 2004

Zinc (Zn) is an essential element in biological process, however inadequate Zn status in general population have been recognized. To update the knowledge for Zn-cadmium (Cd) interaction, we studied the intestinal uptake and transport, and the expression of metal transporter proteins (divalent metal transporter 1, DMT1 ; metal transporter protein 1, MTP1 ; zinc transporter 1, ZnTl ; metallothionein 1 , MT1) in duodenum after Cd exposure using Zn deficient animal model. Rats were led Zn deficient (ZnD, 0.5-1.0 mgZn/kg) or Zn supplemented (ZnS, 50mg Zn/kg) diet for 4 weeks, and followed single administration of $^{109}$ CdCl$_2$orally. The body Zn flatus and tissue Cd concentration were determined at 24 hrs after Cd administration. Total body burden of Cd and Cd absorption index (AI, %) were estimated based on the tissue Cd analyzed. DMT1, MTP1, ZnTl and MT1 mRNA were analyzed by using RT-PCR method. Feeding of Zn deficient diet for 4 weeks produced a reduced body weight gain and a depletion of body Zn. Tissue Cd concentration, body burden of Cd and Cd absorption index were higher in the ZnD diet fed rats than the ZnS diet red rats. Especially, Cd concentration in the small intestine (duodenum, jejunum and ileum) and the colon of FeD diet fed rats were higher markedly than in the FeS diet group. The expression levels of DMT1, MTP1 and ZnT1 mRNA in FeD diet fed rats were similar to the FeS diet. The level of MT1 mRNA expression was significantly lower in the FeD than the FeS diet fed rats. Taken together, theses results indicate that Zn deficiency in diet induce an increased intestinal absorption and tissue retention of Cd, and down -regulate the MT1 expression in the intestine which might be play a part of role in Cd absorption and transport in mammalian. These findings suggest that deficiency of essential metal could be enhanced the toxicity of toxic, non-esstial metals through the metal-metal interaction.

• 공업화학
• /
• 제28권3호
• /
• pp.294-298
• /
• 2017

Dimethyl terephthalate (DMT) 생산과정의 부산물로서 폐기 처리되어왔던 methyl 4-formylbenzoate (MFB)를 출발 물질로하여 고급 형광증백제 family인 Uvitex FP와 동일한 4,4'-di((E)-styryl)-1,1'-biphenyl 기본 골격을 갖는 새로운 형광증백제(fluorescent whitening agent) 후보 물질 6종을 합성하였다. 후보 물질 6종은 MFB 및 그의 유도체와 tetraethyl biphenyl-4,4'-diylbis(methylene) diphosphonate (3)와 Wittig-Horner 반응을 이용하여 합성하였다. 합성된 6종에 대하여 형광증백제로의 가능성을 확인하기 위하여 UV spectrum을 기록하여 몰흡광 계수를 얻었으며, 6종 모두 Uvitex FP 127(log ${\varepsilon}$ 4.85)보다 낮은 몰흡광 계수(log ${\varepsilon}$ 3.95~2.60)를 보임으로서 형광증백제로는 적합하지 못한 것을 확인하였다.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.64-69
• /
• 2018

This paper investigates the compressive deformation behavior of direct metal tooling (DMT), processing titanium alloy (Ti-6Al-4V) parts under high strain loading conditions. Split Hopkinson Pressure Bar (SHPB) experiments were performed to determine the flow stress and the coefficients of the Johnson-Cook model. This model is described as a function of strain, strain rate, and temperature. SHPB experiments were performed to characterize the deformation behavior of specimens made with 3D printers, using Ti-6Al-4V material under high temperature and dynamic loading.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.187-190
• /
• 2007

The objective of this paper is to investigate into the development of injection mould with high cooling characteristics using a direct metal RP technology. In order to manufacture the injection mould with a high cooling rate, three-dimensional conformal cooling channels have been generated in the mould. DMT process, which is one of direct metal RP technologies, has been utilized to directly manufacture the metallic mould with three-dimensional conformal cooling channels. In order to examine the performance of the designed mould, injection molding tests have been carried out. The results of the experiments have been shown that a cooling time and the injection time of the proposed mould are reduced by the factor of five and two times in comparison with the injection mould with linear cooling channels.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.20-29
• /
• 2018

Ti and its alloys show the excellent corrosion resistance to chloride environments, but they show less corrosion resistance in HCl, $H_2SO_4$, NaOH, $H_3PO_4$, and especially HF environments at high temperature and concentration. In this study, we used the commercially pure titanium and Ti-6Al-4V alloy, and evaluated the effect of the manufacturing process on the electrochemical properties. We used commercial products of rolled and forged materials, and made additive manufactured materials by DMT (Directed Metal Tooling) method. We annealed each specimen at $760^{\circ}C$ for one hour and then air cooled. We performed anodic polarization test, AC impedance measurement, and Mott-Schottky plot to evaluate the electrochemical properties. Despite of the difference of its microstructure of CP-Ti and Ti-6Al-4V alloys by the manufacturing process, the anodic polarization behavior was similar in 20% sulfuric acid. However, the addition of 0.1% hydrofluoric acid degraded the electrochemical properties. Among three kinds of the manufacturing process, the electrochemical properties of additive manufactured CP-Ti, and Ti-6Al-4V alloys were the lowest. It is noted that the test materials showed a Warburg impedance in HF acid environments.

• 열처리공학회지
• /
• 제34권2호
• /
• pp.66-74
• /
• 2021

Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has high thermal and electrical conductivity, are highly valuable composite materials. It can be used as heat exchangers with high conductivity under severe corrosion conditions. In order to apply the clad plate to the heat exchanger, it must be manufactured in the form of a tube and additional welding is required. It is important to select the cladding material manufacturing process and the welding process. The process of manufacturing the cladding material includes extrusion, rolling, and explosive bonding. Among them, the explosive bonding process is suitable for additional welding because no heat-affected zone is formed. In this study TIG welding of the explosive-bonded dissimilar clad plates was successfully performed by butt welding. The microstructures and bonding interface of the welded part were observed, and the effect of the bonding layer at the welding interface and the intermetallic compounds on the mechanical properties and tensile plastic deformation behaviors were analyzed. And also the integrity of TIG-welded dissimilar part was evaluated.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.638-645
• /
• 2014

컨테이너 물동량 증대에 따라 항만 내 타부두 간 환적 물동량 수요가 크게 증대되었으나, 기존 YT 방식의 타부두 환적은 이를 효율적으로 뒷받침하지 못하고 있다. 본 논문은 컨테이너항만의 경쟁력 향상을 위한 컨테이너 대용량 이송장치 개발방안을 제시하였다. 시스템 대안의 장단점 분석과 국내 터미널 운영형태를 고려하여 2단적재 다중 편성시스템(DMTS)을 최종 대안으로 선정하였다. DMTS 회전반경은 13.5m로, 국내 기존 항만의 layout에서 즉시 운용 가능할 것으로 판단된다. 특허분석을 통하여 DMTS 핵심기술 항목으로서 현가 조향장치 최적설계, 동력 및 동력전달 장치, 주행제어 및 안전감시장치, 그리고 트레일러 간 연결기 등을 도출하였다. DMTS는 국내 수출입 항만에 적용하는데 문제가 없으며 단위 수송용량이 높아 운영 효율성 개선에 기여할 것으로 판단된다.

• 폴리머
• /
• 제36권4호
• /
• pp.440-447
• /
• 2012

분지화된 폴리에스테르계 공중합체를 제조하고, 공중합체의 분자량, 용융점도, $T_g$, 1/2 method temperature($T_{1/2}$) 및 레올로지 특성을 고찰하여 레이저 프린터 토너 바인더로의 적용을 검토하였다. 디메틸테레프탈레이트(DMT), 에틸렌글리콜(EG), 2,2-bis(4-(2-hydroxypropoxy)phenyl)propane(HPP)으로 제조한 선형공중합체는 분자량이 낮고, 용융탄성이 낮아 이를 개선하기 위하여 분지제로 3 또는 4 관능기를 가진 2-(hydroxymethyl)-2-ethylpropane-1,3-diol(trimethylol propane, TMP), 2,2-bi(hydroxymethyl)-1,3-propanediol(pentaerythritol, PER), 1,2,4-benzenetricarboxylic anhydride(trimellitic anhydride, TMA), 글리세롤 등을 첨가하여 분지화된 공중합체를 제조하였다. 분지제의 함량과 종류에 따른 열적, 레올로지 특성을 고찰하였다. 분지제의 함량이 15 mol% 이상 첨가한 공중합체는 $140^{\circ}C$ 정도의$T_{1/2}$ 값을 가지고, 높은 분자량과 용융탄성을 나타내어 토너를 융착 인쇄하는 레이저 프린터의 핫멜트 토너로서 적당하였다.