• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.4
• /
• pp.273-278
• /
• 2000

Cellulose tosylate(CT) was prepared by reaction of cellulose with p- toluenesulfonylchloride in DMAc/LiCl homogeneous system. In order to study a reversible photoisomerization of disperse red 1(DR-1) attached on natural polymer, cellulose tosylate containing DR-1(DR-1/CT adduct) was prepared at $110^{\circ}C$ in DMAc, and the changes of UV/Vis spectra of its solutions and thick film were investigated by alternate irradiation technique. Form the UV/Vis spectra of DR-1/CT adduct dissolved in cosolvents, such as DMAc, DMAc/THF, DMAc/benzene, and DMAc/chloroform and irradiated with 360 nm and 450 nm ligths, we found out changes of UV/Vis spectra were reversible in all solvents systems and we found out changes of UV/Vis spectra were reversible at thick film, also.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.553-556
• /
• 2015

The usage of the correct combustion characteristic of the treated substance for the safety of the process is critical. For the safe handling of dimethylacetamide (DMAc) being used in various ways in the chemical industry, the flash point and the autoignition temperature (AIT) of DMAc was experimented. And, the lower explosion limit of DMAc was calculated by using the lower flash point obtained in the experiment. The flash points of DMAc by using the Setaflash and Pensky-Martens closed-cup testers measured $61^{\circ}C$ and $65^{\circ}C$, respectively. The flash points of DMAc by using the Tag and Cleveland automatic open cup testers are measured $68^{\circ}C$ and $71^{\circ}C$. The AIT of DMAc by ASTM 659E tester was measured as $347^{\circ}C$. The lower explosion limit by the measured flash point $61^{\circ}C$ was calculated as 1.52 vol%. It was possible to predict lower explosion limit by using the experimental flash point or flash point in the literature.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.417-419
• /
• 2004

Because of the demands for high performance and high integrated system, the needs for optimal platform becomes more importance. Optimal platform can handle more data effectively with same resources. AMBA(Advanced Microprocessor Bus Architecture)$^{TM}$ defines on-chip communication standard for designing high performance embedded micro-controllers. It is consisted of AHB, ASB and APB. It can support fast implementation and reliability in system that is composed with reusable IPs. DMAC is one of master in system and generate master signals of AHB to communicate data from one slave(peripheral or memory) to another slave. It can reduce burden of CPU and increase system performance. We designed DMAC based on AMBA and it supports 13 Channels. Each channel can be controlled by software program. It decides channel's priority using round-robin method. It can support P2P, P2M, M2P and P2P communication.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.113-119
• /
• 2019

Enhancement of footwear impressions in urine on the surface of tiles by using p-dimethylaminocinnamaldehyde (DMAC), which react with urea, and ninhydrin, 1,8-diazafluoren-9-one (DFO), 1,2-indanedione/zinc (1,2-IND/Zn), which react with amino acid, was studied. As a result of comparing the application methods of reagents, the ninhydrin and the 1,2-IND/Zn were suitable for application with spray method, which is spray directly on footwear impression, DFO and DMAC were suitable for application with dry contact method, which is applying heat with press to DMAC impregnated paper on footwear impression. In addition, DMAC applied with dry contact method showed best contrast and enhancement result in both white and black colored tiles by comparing of the sensitivity by different dilution ratio of urine and the aging time of footwear impressions in urine. And the result of applied with DMAC (with dry contact method) on the floor tiles collected at various places in a building's men's and women's bathrooms, it can be successfully enhanced that footwear impressions in urine. So it is believed that the method can be used to recover footwear impressions in urine from real crime scenes.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.3
• /
• pp.295-302
• /
• 2022

This research aims to determine and analyze: (a) the effects of digital marketing activity (DMAc), digital marketing capability (DMC), and Digital marketing asset (DMA), (b) the effects of DMAc, DMC, and DMA on marketing performance (MP), (c). the effects of entrepreneurial orientation (OE) on MP and (d). the mediating role of OA on the effects of DMAc, DMC, and DMA on OE. The research population is all the small enterprise actors in Kendari city applying digital marketing and having a permanent establishment in Kendari City. The analysis tool used is SEM Partial Least Square. Results of the research show that: (a). DMC and DMA have positive and significant effects on OE while DMAc is found to be insignificant on OE, (b). then, DMAc and DMA have positive and significant effects on MP, and DMC is found to be insignificantly increasing MP, (c). OE has positive and significant effects on MP and (d). DMC effects on MP and effects between DMA and MP are mediated by OE, whereas DMA effects on MP are not mediated by OE position. Based on research findings, DMC and DMA are superior at forming research opinions since they have a substantial influence on enhancing collaboration.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.235-243
• /
• 2015

Rhodium(I)-complex of $[Rh(CO)_2I_2{^-}]$ catalyzed carbonylation of anhydrous-trimethylamine in the presence of methyl iodide to give DMAC (N,N-dimethylacetamide) in no solvent. The catalyst had been reused 20 times, the analyses and distillation of collected products showed that the yields of DMAC, MAA (N-methylacetamide), and DMF (N,N-dimethylformamide) were 82.3%, 12.6%, and 4.4%. The conversion rate of trimethylamine was 99 % and the selectivity of DMAC was 82.3% with TON (Turnover Number) of 700. Stepwise procedure of inner-sphere reductive elimination for the formation of DMAC was suggested instead of acyl iodide intermediate.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.57-58
• /
• 2006

Ad hoc MAC protocols using directional antennas can be used to improve the network capacity by improving spatial reuse. But, the directional MAC protocols have the problem of deafness and have a poor throughput performance. The dual-channel DMAC protocol has been proposed to mitigate deafness and improve spatial reuse. In this paper, we propose a dual-channel DMAC protocol using the omnidirectional antenna for an out-of-band tone and directional antennas for control/data channels. In the proposed MAC protocol, an omnidirectional out-of-band tone mitigates deafness and directional antennas used in control/data channels improve spatial reuse and reduce interference packets. The throughput performance of the proposed MAC protocol is confirmed by computer simulations using Qualnet ver. 3.8 simulator.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.11a
• /
• pp.313-317
• /
• 2007

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.